在学习OVS VXLAN实现之前，我们先回顾一下传统VTEP设备是如何处理VXLAN报文的。如下图所示：
vxlan报文进入交换机端口后，根据报文头部信息进行vxlan隧道终结。隧道终结后，根据underlay信息进行overlay映射，得到overlay的bd和vrf.对于上图来说，报文隧道终结后从vxlan10进入br10，就为overlay报文绑定了br10和bdif。其中br10进行同子网FDB转发，如果overlay报文的目的MAC为bdif的mac，那么报文将从bdif进入其所属的vrf进行三层路由。这个过程就是VTEP接收到vxlan报文后的处理流程。
对于overlay报文，在经过overlay路由后，如果其目的bd为br10。那么报文将会从bdif进入br10，经过fdb后从vxlan10输出。vxlan10接口负责为报文构建vxlan封装。vxlan报文封装好后进入underlay路由转发，离开VTEP。
（免费订阅,永久学习）学习地址: Dpdk/网络协议栈/vpp/OvS/DDos/NFV/虚拟化/高性能专家-学习视频教程-腾讯课堂
更多DPDK相关学习资料有需要的可以自行报名学习,免费订阅,永久学习,或点击这里加qun免费
领取,关注我持续更新哦! !
VTEP组成要素
tunnel-terminate table
隧道终结表用于剥掉vxlan报文的underlay报文头。
VXLAN报文进入VTEP后，需要进行隧道终结。VXLAN属于P2MP(点到多点)隧道。进行隧道终结时只需要校验目的IP是本机的IP即可(目的MAC必定是本机的)。当然隧道终结之前，需要确定报文是否为VXLAN报文。隧道终结一般有两种形式：
- 像linux内核那样，不管报文是否为vxlan报文，当成常规的报文进行处理，因为vxlan报文的目的IP是本机，报文将会被送往local的udp进行处理，在udp处理时，根据目的端口为4789，然后将报文转入vlxan端口进行处理，这时overlay报文将会从vxlan中进入协议栈进行第二遍处理。
- 向传统硬件厂商一样，在parser阶段就已经将整个报文的内外层报文头都提取出来，如果是vxlan报文，直接进入tunnel-terminate表进行终结。
tunnel-decap-map table
隧道解封装映射表，用于确定overlay报文的二层广播域和三层路由域，即bd和vrf。
vxlan隧道时点到多点的隧道，可以根据vni来映射其所属的BD和VRF，用于overlay报文的同子网FDB和不同子网的路由。
tunnel-encap table
隧道封装表负责对fdb转发后或者路由后的报文进行vxlan报文封装。对于同子网的报文需要确定vni，underlay源IP，underlay目的IP即可，一般来说同子网转发，vni是不会变的。对于跨子网转发，需要借助路由，路由后确定了overlay-smac，overlay-dmac。对于vni，underlay-sip，underlay-dip的确定，不同的转发模型有很大的不同。传统的转发模型是，overlay-route只负责路由，路由后封装好链路层。报文从bdif输出，bdif连接到一个桥，由桥的vni决定报文的vni。还有一些厂商可以直接由路由决定vni，underlay-sip和underlay-dip，具体可以参考sonic的sai接口设计。
underlay route table
overlay报文封装好后，进入underlay进行路由转发，所以需要underlay路由。传统网络设备需要给vxlan隧道携带一个underlay rif，通过该rif指定underlay vrf。
underlay neighbor
underlay路由后，需要邻居进行underlay链路封装，需要邻居表。
OVS DPDK VXLAN
ovs要实现vtep功能，必定需要实现上面的要素。
主要数据结构
struct tnl_match {
ovs_be64 in_key;//vni
struct in6_addr ipv6_src;//源IP
struct in6_addr ipv6_dst;//目的IP
odp_port_t odp_port;//对应的接口编号
bool in_key_flow;//该标志位false，表示vni需要严格匹配，为true，表示希望流表设置vni。
bool ip_src_flow;//为false表示必须匹配源IP，如果源IP为0表示通配所有源IP。为true表示使用openflow流表设置隧道
//tunnel-id进行进一步匹配。
bool ip_dst_flow;//为false表示必须匹配目的IP，为true表示使用openflow流表设置隧道的目的IP。
};
struct tnl_port {
struct hmap_node ofport_node;
struct hmap_node match_node;
const struct ofport_dpif *ofport;
uint64_t change_seq;
struct netdev *netdev;
struct tnl_match match;//隧道认证元素，唯一标识一个隧道
};
// ovs将vxlan port存在一个hash表中：
/* Each hmap contains "struct tnl_port"s.
* The index is a combination of how each of the fields listed under "Tunnel
* matches" above matches, see the final paragraph for ordering.
* vxlan端口映射表。根据in_key_flow，in_dst_flow，in_src_flow三个参数分成12个
* 优先级。
*/
static struct hmap *tnl_match_maps[N_MATCH_TYPES] OVS_GUARDED_BY(rwlock);
详细说明
struct tnl_match 结构为vxlan端口的核心结构。in_key，ipv6_src，ipv6_dst指定了vxlan封装的核心成员，这些是传统VTEP的vxlan接口必须的成员。它们用于隧道终结和隧道封装。但是在ovs中，设计者添加了是三个重要的标志：
- in_key_flow：有两种取值false表示该隧道VNI由vxlan端口创建时设置，该值会用来进行隧道终结，如果报文从该接口出去的话，会使用该值进行封装。所以为false的时候，优先级会更高。如果为true，则表示隧道终结不匹配vni，具体vni的操作由流表进行处理，封装报文时，vni由流表进行设置。
- ip_src_flow：有三种取值，如果为false，表示隧道终结时需要使用该IP与vxlan报文的目的IP进行匹配。报文封装时，使用该IP作为该vxlan端口出去报文的隧道源IP。为true时有两种情况，src_ip为0表示通配所有IP，否则，只能匹配确定IP。
- ip_dst_flow：有两种值，如果为false，表示隧道终结时需要匹配报文的源IP为该IP。报文从该接口输出时，隧道目的接口为该接口。如果为true的话，都由flow进行处理。
vxlan端口创建示例：
admin@ubuntu:$ sudo ovs-vsctl add-port br0 vxlan1 -- set interface vxlan1 type=vxlan options:remote_ip=flow options:key=flow options:dst_port=8472 options:local_ip=flow admin@ubuntu:$ sudo ovs-vsctl add-port br0 vxlan2 -- set interface vxlan2 type=vxlan options:remote_ip=flow options:key=flow options:dst_port=8472 admin@ubuntu:/var/log/openvswitch$ sudo ovs-vsctl add-port br0 vxlan13 -- set interface vxlan13 type=vxlan options:remote_ip=flow options:key=191 options:dst_port=8472 admin@ubuntu:/var/log/openvswitch$
ovs交换机是一个sdn交换机，其需要核心动作是openflow流表来完成。引入这三个标志正是用来解除传统vxlan设备的限制。这三个要素根据取值的不同，可以有2*2*3=12种组合，即tnl_match_maps数组的大小。
隧道端口查找过程
/* Returns a pointer to the 'tnl_match_maps' element corresponding to 'm''s
* matching criteria.
* 根据三个标志和配置决定其优先级，即map的索引。这个函数在vxlan接口添加时会调用，决定vxlan接口加入到那个map中
*/
static struct hmap **
tnl_match_map(const struct tnl_match *m)
{
enum ip_src_type ip_src;
ip_src = (m->ip_src_flow ? IP_SRC_FLOW
: ipv6_addr_is_set(&m->ipv6_src) ? IP_SRC_CFG
: IP_SRC_ANY);
return &tnl_match_maps[6 * m->in_key_flow + 3 * m->ip_dst_flow + ip_src];
}
/* Returns the tnl_port that is the best match for the tunnel data in 'flow',
* or NULL if no tnl_port matches 'flow'.
* 隧道终结过程，根据报文信息查找对应的vxlan端口，进行隧道终结
*/
static struct tnl_port *
tnl_find(const struct flow *flow) OVS_REQ_RDLOCK(rwlock)
{
enum ip_src_type ip_src;
int in_key_flow;
int ip_dst_flow;
int i;
i = 0;
for (in_key_flow = 0; in_key_flow < 2; in_key_flow++) {//in_key_flow优先级最高，0优先级高于1
for (ip_dst_flow = 0; ip_dst_flow < 2; ip_dst_flow++) {//ip_dst_flow优先级次之，即vxlan报文源IP
for (ip_src = 0; ip_src < 3; ip_src++) {//ip_src优先级最低，可能的取值可以查看IP_SRC_CFG
struct hmap *map = tnl_match_maps[i];
if (map) {
struct tnl_port *tnl_port;
struct tnl_match match;
memset(&match, 0, sizeof match);
/* The apparent mix-up of 'ip_dst' and 'ip_src' below is
* correct, because "struct tnl_match" is expressed in
* terms of packets being sent out, but we are using it
* here as a description of how to treat received
* packets.
* in_key_flow为真的时候，不需要匹配vni
*/
match.in_key = in_key_flow ? 0 : flow->tunnel.tun_id;
if (ip_src == IP_SRC_CFG) {
match.ipv6_src = flow_tnl_dst(&flow->tunnel);
}
if (!ip_dst_flow) {/* */
match.ipv6_dst = flow_tnl_src(&flow->tunnel);
}
match.odp_port = flow->in_port.odp_port;
match.in_key_flow = in_key_flow;
match.ip_dst_flow = ip_dst_flow;
match.ip_src_flow = ip_src == IP_SRC_FLOW;
//进行精确匹配
tnl_port = tnl_find_exact(&match, map);
if (tnl_port) {
return tnl_port;
}
}
i++;
}
}
}
return NULL;
}
优势
ovs通过这三个标志的加入，极大的简化了vxlan端口的配置，使得全局一个vxlan端口足以满足应用，其它参数通过流表来操作，突出了SDN的优势，可以适应大规模场景。
terminate table
ovs的隧道终结表是在创建vxlan port的时候构建。
//隧道全局信息初始化。ovs采用分类器来构建隧道终结表cls。全局变量addr_list保存了本地所有的underlay ip地址。
//underlay ip将来会作为隧道终结的目的地址，也会作为隧道封装的源IP地址。
//port_list保存了使用传输层端口的隧道，比如vxlan隧道。
void
tnl_port_map_init(void)
{
classifier_init(&cls, flow_segment_u64s);//隧道终结表
ovs_list_init(&addr_list);//underlay ip链表
ovs_list_init(&port_list);//tnl_port控制块链表
unixctl_command_register("tnl/ports/show", "-v", 0, 1, tnl_port_show, NULL);
}
隧道端口添加
/* Adds 'ofport' to the module with datapath port number 'odp_port'. 'ofport's
* must be added before they can be used by the module. 'ofport' must be a
* tunnel.
*
* Returns 0 if successful, otherwise a positive errno value.
* native_tnl表示是否开启了隧道终结
*/
int
tnl_port_add(const struct ofport_dpif *ofport, const struct netdev *netdev,
odp_port_t odp_port, bool native_tnl, const char name[]) OVS_EXCLUDED(rwlock)
{
bool ok;
fat_rwlock_wrlock(&rwlock);
ok = tnl_port_add__(ofport, netdev, odp_port, true, native_tnl, name);
fat_rwlock_unlock(&rwlock);
return ok ? 0 : EEXIST;
}
//添加隧道端口
static bool
tnl_port_add__(const struct ofport_dpif *ofport, const struct netdev *netdev,
odp_port_t odp_port, bool warn, bool native_tnl, const char name[])
OVS_REQ_WRLOCK(rwlock)
{
const struct netdev_tunnel_config *cfg;
struct tnl_port *existing_port;
struct tnl_port *tnl_port;
struct hmap **map;
cfg = netdev_get_tunnel_config(netdev);
ovs_assert(cfg);
tnl_port = xzalloc(sizeof *tnl_port);
tnl_port->ofport = ofport;
tnl_port->netdev = netdev_ref(netdev);
tnl_port->change_seq = netdev_get_change_seq(tnl_port->netdev);
//这些参数不会影响隧道终结
tnl_port->match.in_key = cfg->in_key;
tnl_port->match.ipv6_src = cfg->ipv6_src;
tnl_port->match.ipv6_dst = cfg->ipv6_dst;
tnl_port->match.ip_src_flow = cfg->ip_src_flow;
tnl_port->match.ip_dst_flow = cfg->ip_dst_flow;
tnl_port->match.in_key_flow = cfg->in_key_flow;
tnl_port->match.odp_port = odp_port;
//根据隧道的匹配条件查找其在map中的位置
map = tnl_match_map(&tnl_port->match);
//查看是否存在一样的接口
existing_port = tnl_find_exact(&tnl_port->match, *map);
if (existing_port) {
if (warn) {
struct ds ds = DS_EMPTY_INITIALIZER;
tnl_match_fmt(&tnl_port->match, &ds);
VLOG_WARN("%s: attempting to add tunnel port with same config as "
"port '%s' (%s)", tnl_port_get_name(tnl_port),
tnl_port_get_name(existing_port), ds_cstr(&ds));
ds_destroy(&ds);
}
netdev_close(tnl_port->netdev);
free(tnl_port);
return false;
}
hmap_insert(ofport_map, &tnl_port->ofport_node, hash_pointer(ofport, 0));
if (!*map) {
*map = xmalloc(sizeof **map);
hmap_init(*map);
}
hmap_insert(*map, &tnl_port->match_node, tnl_hash(&tnl_port->match));
tnl_port_mod_log(tnl_port, "adding");
if (native_tnl) {//如果支持隧道终结，则构建隧道终结表，一般来说dpdk模式下需要开启，内核模式下不需要
const char *type;
type = netdev_get_type(netdev);
tnl_port_map_insert(odp_port, cfg->dst_port, name, type);
}
return true;
}
//对于需要传输层的隧道，则对目的端口进行处理
void
tnl_port_map_insert(odp_port_t port, ovs_be16 tp_port,
const char dev_name[], const char type[])
{
struct tnl_port *p;
struct ip_device *ip_dev;
uint8_t nw_proto;
nw_proto = tnl_type_to_nw_proto(type);
if (!nw_proto) {//不需要传输层，则直接返回
return;
}
//将隧道端口加入链表，这里有一个bug:不是比较tp_port == p->tp_port，而是p->port == port
//判断条件修改为(p->port == port && p->nw_proto == nw_proto)
ovs_mutex_lock(&mutex);
LIST_FOR_EACH(p, node, &port_list) {
if (tp_port == p->tp_port && p->nw_proto == nw_proto) {
goto out;
}
}
p = xzalloc(sizeof *p);
p->port = port;
p->tp_port = tp_port;
p->nw_proto = nw_proto;
ovs_strlcpy(p->dev_name, dev_name, sizeof p->dev_name);
ovs_list_insert(&port_list, &p->node);
//遍历每一个本机的设备ip地址，使用该设备作为源地址，构建隧道终结表
//隧道终结需要参数为：传输层协议，传输层目的端口，本机IP(vxlan报文的目的IP)
LIST_FOR_EACH(ip_dev, node, &addr_list) {
map_insert_ipdev__(ip_dev, p->dev_name, p->port, p->nw_proto, p->tp_port);
}
out:
ovs_mutex_unlock(&mutex);
}
//ip_dev：源设备
//：设备名字
//：端口编号，
//: 协议，端口
static void
map_insert_ipdev__(struct ip_device *ip_dev, char dev_name[],
odp_port_t port, uint8_t nw_proto, ovs_be16 tp_port)
{
if (ip_dev->n_addr) {//遍历设备的每一个地址
int i;
for (i = 0; i < ip_dev->n_addr; i++) {
//报文的目的mac必须是ip_dev->mac
map_insert(port, ip_dev->mac, &ip_dev->addr[i],
nw_proto, tp_port, dev_name);
}
}
}
隧道终结过程
上面我们看到了如何构建隧道终结表，这里我们看一下ovs是如何执行隧道终结过程。
ovs在设计的时候只能处理一层报文，即对报文进行解析时，只能解析到传输层，无法感知报文的overlay信息。vxlan报文从dpdk接口到达ovs时，其目的mac是internel接口的mac，目的IP是internel接口的IP。使用normal规则进行转发时会将报文转发到internal接口，在构建OUTPUT动作的时候进行隧道终结。
/* 组合报文输出动作 */
static void
compose_output_action(struct xlate_ctx *ctx, ofp_port_t ofp_port,
const struct xlate_bond_recirc *xr)
{
/* 需要检查一下是否是stp报文 */
compose_output_action__(ctx, ofp_port, xr, true);
}
/* 组合报文输出动作 */
static void
compose_output_action__(struct xlate_ctx *ctx, ofp_port_t ofp_port,
const struct xlate_bond_recirc *xr, bool check_stp)
{
const struct xport *xport = get_ofp_port(ctx->xbridge, ofp_port);/* 获取xport */
struct flow_wildcards *wc = ctx->wc;/* 获取流通配符 */
struct flow *flow = &ctx->xin->flow;/* 获取输入流 */
struct flow_tnl flow_tnl;
ovs_be16 flow_vlan_tci;
uint32_t flow_pkt_mark;
uint8_t flow_nw_tos;
odp_port_t out_port, odp_port;
bool tnl_push_pop_send = false;
uint8_t dscp;
......
if (out_port != ODPP_NONE) {/* 输出转换 */
xlate_commit_actions(ctx);/* 转换输出动作 */
if (xr) {/* 如果存在bond的重入动作 */
struct ovs_action_hash *act_hash;
/* Hash action. */
act_hash = nl_msg_put_unspec_uninit(ctx->odp_actions,
OVS_ACTION_ATTR_HASH,
sizeof *act_hash);
act_hash->hash_alg = xr->hash_alg;
act_hash->hash_basis = xr->hash_basis;
/* Recirc action. 添加重入动作，设置重入id */
nl_msg_put_u32(ctx->odp_actions, OVS_ACTION_ATTR_RECIRC,
xr->recirc_id);
} else {
if (tnl_push_pop_send) {/* 是否需要进行标签的弹入或者弹出动作 */
build_tunnel_send(ctx, xport, flow, odp_port);
flow->tunnel = flow_tnl; /* Restore tunnel metadata 报文报文的元数据 */
} else {
odp_port_t odp_tnl_port = ODPP_NONE;
/* XXX: Write better Filter for tunnel port. We can use inport
* int tunnel-port flow to avoid these checks completely.
* 报文如果是发往local，那么检查一下是否设置了隧道终结功能。进行隧道终结
*/
if (ofp_port == OFPP_LOCAL &&
ovs_native_tunneling_is_on(ctx->xbridge->ofproto)) {
odp_tnl_port = tnl_port_map_lookup(flow, wc);
}
if (odp_tnl_port != ODPP_NONE) {
nl_msg_put_odp_port(ctx->odp_actions,
OVS_ACTION_ATTR_TUNNEL_POP,
odp_tnl_port);
} else {
/* Tunnel push-pop action is not compatible with
* IPFIX action. */
compose_ipfix_action(ctx, out_port);
/* Handle truncation of the mirrored packet. */
if (ctx->mirror_snaplen > 0 &&
ctx->mirror_snaplen < UINT16_MAX) {
struct ovs_action_trunc *trunc;
trunc = nl_msg_put_unspec_uninit(ctx->odp_actions,
OVS_ACTION_ATTR_TRUNC,
sizeof *trunc);
trunc->max_len = ctx->mirror_snaplen;
if (!ctx->xbridge->support.trunc) {
ctx->xout->slow |= SLOW_ACTION;
}
}
nl_msg_put_odp_port(ctx->odp_actions,
OVS_ACTION_ATTR_OUTPUT,
out_port);
}
}
}
ctx->sflow_odp_port = odp_port;
ctx->sflow_n_outputs++;
/* 设置出接口 */
ctx->nf_output_iface = ofp_port;
}
/* 出端口镜像处理，这里做的是出镜像 */
if (mbridge_has_mirrors(ctx->xbridge->mbridge) && xport->xbundle) {/* 判断该网桥是否支持镜像，并且处在出端口 */
/*进行出镜像处理，处理出镜像 */
mirror_packet(ctx, xport->xbundle,
xbundle_mirror_dst(xport->xbundle->xbridge,
xport->xbundle));/* 获取该端口的镜像策略 */
}
out:
/* Restore flow，值写入到动作后，需要进行还原 */
flow->vlan_tci = flow_vlan_tci;
flow->pkt_mark = flow_pkt_mark;
flow->nw_tos = flow_nw_tos;
}
/* 'flow' is non-const to allow for temporary modifications during the lookup.
* Any changes are restored before returning.
* flow参数允许临时修改一些值，但是在返回之前需要被恢复原来的值。
*/
odp_port_t
tnl_port_map_lookup(struct flow *flow, struct flow_wildcards *wc)
{
//进行分类器规则查找，进行隧道终结
const struct cls_rule *cr = classifier_lookup(&cls, OVS_VERSION_MAX, flow,
wc);
//返回隧道端口编号。
return (cr) ? tnl_port_cast(cr)->portno : ODPP_NONE;
}
上面是慢路径查找分类器时执行的处理，报文被处理完后，最终会安装快转流表，执行datapath动作。
/* 动作执行回调函数，参数may_steal表示是否可以释放报文 */
static void
dp_execute_cb(void *aux_, struct dp_packet_batch *packets_,
const struct nlattr *a, bool may_steal)
{
struct dp_netdev_execute_aux *aux = aux_;/* 动作执行辅助函数 */
uint32_t *depth = recirc_depth_get();/* 重入深度 */
struct dp_netdev_pmd_thread *pmd = aux->pmd;/* 轮询线程 */
struct dp_netdev *dp = pmd->dp;/* 轮询的网桥设备 */
int type = nl_attr_type(a);/* 获取动作类型 */
long long now = aux->now;/* 获取时间 */
struct tx_port *p;/* 发送端口 */
switch ((enum ovs_action_attr)type) {/* 动作类型 */
......
case OVS_ACTION_ATTR_TUNNEL_POP:/* 去掉外层标签，依然需要重入，进行内层报文的处理 */
if (*depth < MAX_RECIRC_DEPTH) {
struct dp_packet_batch *orig_packets_ = packets_;
odp_port_t portno = nl_attr_get_odp_port(a);
//查看端口是否存在
p = pmd_tnl_port_cache_lookup(pmd, portno);
if (p) {
struct dp_packet_batch tnl_pkt;
int i;
if (!may_steal) {
dp_packet_batch_clone(&tnl_pkt, packets_);
packets_ = &tnl_pkt;
dp_packet_batch_reset_cutlen(orig_packets_);
}
dp_packet_batch_apply_cutlen(packets_);
//进行隧道decap，p->port->netdev指导如何decap封装。端口号无意义。
netdev_pop_header(p->port->netdev, packets_);
if (!packets_->count) {
return;
}
for (i = 0; i < packets_->count; i++) {
//overlay报文的输入接口被设置为portno。
packets_->packets[i]->md.in_port.odp_port = portno;
}
(*depth)++;
dp_netdev_recirculate(pmd, packets_);
(*depth)--;
return;
}
}
break;
......
}
/* vxlan头出栈 */
struct dp_packet *
netdev_vxlan_pop_header(struct dp_packet *packet)
{
struct pkt_metadata *md = &packet->md;/* 获取报文的元数据 */
struct flow_tnl *tnl = &md->tunnel;/* 获取元数据的隧道信息 */
struct vxlanhdr *vxh;
unsigned int hlen;
pkt_metadata_init_tnl(md);/* 初始化报文的元数据 */
if (VXLAN_HLEN > dp_packet_l4_size(packet)) {/* 如果整个报文的大小没有vxlan封装大，那么返回错误 */
goto err;
}
vxh = udp_extract_tnl_md(packet, tnl, &hlen);/* 提取vxlan隧道信息 */
if (!vxh) {
goto err;
}
/* 进行vxlan头部校验 */
if (get_16aligned_be32(&vxh->vx_flags) != htonl(VXLAN_FLAGS) ||
(get_16aligned_be32(&vxh->vx_vni) & htonl(0xff))) {
VLOG_WARN_RL(&err_rl, "invalid vxlan flags=%#x vni=%#x\n",
ntohl(get_16aligned_be32(&vxh->vx_flags)),
ntohl(get_16aligned_be32(&vxh->vx_vni)));
goto err;
}
//提取vni设置成隧道id
tnl->tun_id = htonll(ntohl(get_16aligned_be32(&vxh->vx_vni)) >> 8);
tnl->flags |= FLOW_TNL_F_KEY;
/* 偏移掉隧道头 */
dp_packet_reset_packet(packet, hlen + VXLAN_HLEN);
return packet;
err:
dp_packet_delete(packet);
return NULL;
}
提取隧道元数据填充到flow中，将隧道头偏移掉，隧道终结完毕，内层报文准备重入。
tunnel-decap-map table
前面已经说明了隧道终结过程，接下来需要进行解封装后的映射，查找overlay报文的输入VXLAN端口。从而开始overlay报文的处理。ovs是通过vxlan隧道描述控制块实现decap-map功能的。
vxlan接口描述控制块查找
隧道终结后，报文带着隧道元数据调用dp_netdev_recirculate函数进行重入，重入后走慢路径查询分类器。
static struct ofproto_dpif *
xlate_lookup_ofproto_(const struct dpif_backer *backer, const struct flow *flow,
ofp_port_t *ofp_in_port, const struct xport **xportp)
{
struct xlate_cfg *xcfg = ovsrcu_get(struct xlate_cfg *, &xcfgp);/* 获取当前生效的xlate配置 */
const struct xport *xport;
xport = xport_lookup(xcfg, tnl_port_should_receive(flow)
? tnl_port_receive(flow)
: odp_port_to_ofport(backer, flow->in_port.odp_port));
if (OVS_UNLIKELY(!xport)) {
return NULL;
}
*xportp = xport;
if (ofp_in_port) {
*ofp_in_port = xport->ofp_port;
}
return xport->xbridge->ofproto;/* 根据xlate端口找到其openflow交换机描述控制块ofproto */
}
使用函数tnl_port_receive(flow)查询vxlan端口描述控制块。
/* Looks in the table of tunnels for a tunnel matching the metadata in 'flow'.
* Returns the 'ofport' corresponding to the new in_port, or a null pointer if
* none is found.
*
* Callers should verify that 'flow' needs to be received by calling
* tnl_port_should_receive() before this function. */
const struct ofport_dpif *
tnl_port_receive(const struct flow *flow) OVS_EXCLUDED(rwlock)
{
char *pre_flow_str = NULL;
const struct ofport_dpif *ofport;
struct tnl_port *tnl_port;
fat_rwlock_rdlock(&rwlock);
//找到对应的隧道接口
tnl_port = tnl_find(flow);
//使用隧道接口作为新的输入接口
ofport = tnl_port ? tnl_port->ofport : NULL;
if (!tnl_port) {
char *flow_str = flow_to_string(flow);
VLOG_WARN_RL(&rl, "receive tunnel port not found (%s)", flow_str);
free(flow_str);
goto out;
}
if (!VLOG_DROP_DBG(&dbg_rl)) {
pre_flow_str = flow_to_string(flow);
}
if (pre_flow_str) {
char *post_flow_str = flow_to_string(flow);
char *tnl_str = tnl_port_fmt(tnl_port);
VLOG_DBG("flow received\n"
"%s"
" pre: %s\n"
"post: %s",
tnl_str, pre_flow_str, post_flow_str);
free(tnl_str);
free(pre_flow_str);
free(post_flow_str);
}
out:
fat_rwlock_unlock(&rwlock);
return ofport;
}
/* Returns the tnl_port that is the best match for the tunnel data in 'flow',
* or NULL if no tnl_port matches 'flow'. */
static struct tnl_port *
tnl_find(const struct flow *flow) OVS_REQ_RDLOCK(rwlock)
{
enum ip_src_type ip_src;
int in_key_flow;
int ip_dst_flow;
int i;
i = 0;
for (in_key_flow = 0; in_key_flow < 2; in_key_flow++) {
for (ip_dst_flow = 0; ip_dst_flow < 2; ip_dst_flow++) {
for (ip_src = 0; ip_src < 3; ip_src++) {
struct hmap *map = tnl_match_maps[i];
if (map) {
struct tnl_port *tnl_port;
struct tnl_match match;
memset(&match, 0, sizeof match);
/* The apparent mix-up of 'ip_dst' and 'ip_src' below is
* correct, because "struct tnl_match" is expressed in
* terms of packets being sent out, but we are using it
* here as a description of how to treat received
* packets.
* in_key_flow为真的时候，不需要匹配vni
*/
match.in_key = in_key_flow ? 0 : flow->tunnel.tun_id;
if (ip_src == IP_SRC_CFG) {
match.ipv6_src = flow_tnl_dst(&flow->tunnel);
}
if (!ip_dst_flow) {/* */
match.ipv6_dst = flow_tnl_src(&flow->tunnel);
}
match.odp_port = flow->in_port.odp_port;
match.in_key_flow = in_key_flow;
match.ip_dst_flow = ip_dst_flow;
match.ip_src_flow = ip_src == IP_SRC_FLOW;
//进行精确匹配
tnl_port = tnl_find_exact(&match, map);
if (tnl_port) {
return tnl_port;
}
}
i++;
}
}
}
return NULL;
}
tunnel-encap table
这里开始分析vxlan封装。当overlay报文完成了处理之后，如果它是发往另外vtep的话，最后将会从一个tunnel口出去。在慢速路径构建output动作时将会处理隧道相关事情。
/* 组合报文输出动作 */
static void
compose_output_action__(struct xlate_ctx *ctx, ofp_port_t ofp_port,
const struct xlate_bond_recirc *xr, bool check_stp)
{
const struct xport *xport = get_ofp_port(ctx->xbridge, ofp_port);/* 获取xport */
......
if (xport->is_tunnel) {/* 如果该端口是隧道接口 */
struct in6_addr dst;
/* Save tunnel metadata so that changes made due to
* the Logical (tunnel) Port are not visible for any further
* matches, while explicit set actions on tunnel metadata are.
*/
flow_tnl = flow->tunnel;/* 先保存隧道元数据 */
//
odp_port = tnl_port_send(xport->ofport, flow, ctx->wc);
if (odp_port == ODPP_NONE) {
xlate_report(ctx, OFT_WARN, "Tunneling decided against output");
goto out; /* restore flow_nw_tos */
}
dst = flow_tnl_dst(&flow->tunnel);//
if (ipv6_addr_equals(&dst, &ctx->orig_tunnel_ipv6_dst)) {
xlate_report(ctx, OFT_WARN, "Not tunneling to our own address");
goto out; /* restore flow_nw_tos */
}
if (ctx->xin->resubmit_stats) {/* 跟新统计信息 */
netdev_vport_inc_tx(xport->netdev, ctx->xin->resubmit_stats);
}
if (ctx->xin->xcache) {/* 添加netdev统计信息 */
struct xc_entry *entry;
entry = xlate_cache_add_entry(ctx->xin->xcache, XC_NETDEV);
entry->dev.tx = netdev_ref(xport->netdev);
}
out_port = odp_port;
//执行隧道添加或者隧道终结
if (ovs_native_tunneling_is_on(ctx->xbridge->ofproto)) {
xlate_report(ctx, OFT_DETAIL, "output to native tunnel");
tnl_push_pop_send = true;
} else {
xlate_report(ctx, OFT_DETAIL, "output to kernel tunnel");
commit_odp_tunnel_action(flow, &ctx->base_flow, ctx->odp_actions);/* 提交隧道动作 */
flow->tunnel = flow_tnl; /* Restore tunnel metadata 恢复隧道元数据 */
}
} else {
odp_port = xport->odp_port;
out_port = odp_port;
}
if (out_port != ODPP_NONE) {/* 输出转换 */
xlate_commit_actions(ctx);/* 转换输出动作 */
if (xr) {/* 如果存在bond的重入动作 */
struct ovs_action_hash *act_hash;
/* Hash action. */
act_hash = nl_msg_put_unspec_uninit(ctx->odp_actions,
OVS_ACTION_ATTR_HASH,
sizeof *act_hash);
act_hash->hash_alg = xr->hash_alg;
act_hash->hash_basis = xr->hash_basis;
/* Recirc action. 添加重入动作，设置重入id */
nl_msg_put_u32(ctx->odp_actions, OVS_ACTION_ATTR_RECIRC,
xr->recirc_id);
} else {
if (tnl_push_pop_send) {/* 是否需要进行标签的弹入或者弹出动作 */
build_tunnel_send(ctx, xport, flow, odp_port);
flow->tunnel = flow_tnl; /* Restore tunnel metadata 报文报文的元数据 */
} else {
odp_port_t odp_tnl_port = ODPP_NONE;
/* XXX: Write better Filter for tunnel port. We can use inport
* int tunnel-port flow to avoid these checks completely.
* 报文如果是发往local，那么检查一下是否设置了隧道终结功能。
*/
if (ofp_port == OFPP_LOCAL &&
ovs_native_tunneling_is_on(ctx->xbridge->ofproto)) {
odp_tnl_port = tnl_port_map_lookup(flow, wc);
}
//存在隧道终结表项，添加隧道终结动作。
if (odp_tnl_port != ODPP_NONE) {
nl_msg_put_odp_port(ctx->odp_actions,
OVS_ACTION_ATTR_TUNNEL_POP,
odp_tnl_port);
} else {
/* Tunnel push-pop action is not compatible with
* IPFIX action. */
compose_ipfix_action(ctx, out_port);
/* Handle truncation of the mirrored packet. */
if (ctx->mirror_snaplen > 0 &&
ctx->mirror_snaplen < UINT16_MAX) {
struct ovs_action_trunc *trunc;
trunc = nl_msg_put_unspec_uninit(ctx->odp_actions,
OVS_ACTION_ATTR_TRUNC,
sizeof *trunc);
trunc->max_len = ctx->mirror_snaplen;
if (!ctx->xbridge->support.trunc) {
ctx->xout->slow |= SLOW_ACTION;
}
}
nl_msg_put_odp_port(ctx->odp_actions,
OVS_ACTION_ATTR_OUTPUT,
out_port);
}
}
}
ctx->sflow_odp_port = odp_port;
ctx->sflow_n_outputs++;
/* 设置出接口 */
ctx->nf_output_iface = ofp_port;
}
/* 出端口镜像处理，这里做的是出镜像 */
if (mbridge_has_mirrors(ctx->xbridge->mbridge) && xport->xbundle) {/* 判断该网桥是否支持镜像，并且处在出端口 */
/*进行出镜像处理，处理出镜像 */
mirror_packet(ctx, xport->xbundle,
xbundle_mirror_dst(xport->xbundle->xbridge,
xport->xbundle));/* 获取该端口的镜像策略 */
}
out:
/* Restore flow，值写入到动作后，需要进行还原 */
flow->vlan_tci = flow_vlan_tci;
flow->pkt_mark = flow_pkt_mark;
flow->nw_tos = flow_nw_tos;
}
/* Given that 'flow' should be output to the ofport corresponding to
* 'tnl_port', updates 'flow''s tunnel headers and returns the actual datapath
* port that the output should happen on. May return ODPP_NONE if the output
* shouldn't occur.
* */
odp_port_t
tnl_port_send(const struct ofport_dpif *ofport, struct flow *flow,
struct flow_wildcards *wc) OVS_EXCLUDED(rwlock)
{
const struct netdev_tunnel_config *cfg;/* 隧道配置信息 */
struct tnl_port *tnl_port;
char *pre_flow_str = NULL;
odp_port_t out_port;
fat_rwlock_rdlock(&rwlock);/* 获取读写锁的读锁 */
tnl_port = tnl_find_ofport(ofport);/* 获取该端口的隧道端口 */
out_port = tnl_port ? tnl_port->match.odp_port : ODPP_NONE;
if (!tnl_port) {
goto out;
}
cfg = netdev_get_tunnel_config(tnl_port->netdev);/* 获取端口的隧道配置 */
ovs_assert(cfg);
if (!VLOG_DROP_DBG(&dbg_rl)) {
pre_flow_str = flow_to_string(flow);
}
if (!cfg->ip_src_flow) {/* 指定了源IP */
flow->tunnel.ip_src = in6_addr_get_mapped_ipv4(&tnl_port->match.ipv6_src);
if (!flow->tunnel.ip_src) {
flow->tunnel.ipv6_src = tnl_port->match.ipv6_src;
} else {
flow->tunnel.ipv6_src = in6addr_any;
}
}
if (!cfg->ip_dst_flow) {/* 指定了目的IP */
flow->tunnel.ip_dst = in6_addr_get_mapped_ipv4(&tnl_port->match.ipv6_dst);
if (!flow->tunnel.ip_dst) {
flow->tunnel.ipv6_dst = tnl_port->match.ipv6_dst;
} else {
flow->tunnel.ipv6_dst = in6addr_any;
}
}
flow->tunnel.tp_dst = cfg->dst_port;/* 目的端口号 */
if (!cfg->out_key_flow) {
flow->tunnel.tun_id = cfg->out_key;
}
if (cfg->ttl_inherit && is_ip_any(flow)) {
wc->masks.nw_ttl = 0xff;/* 需要匹配ttl */
flow->tunnel.ip_ttl = flow->nw_ttl;
} else {
flow->tunnel.ip_ttl = cfg->ttl;
}
if (cfg->tos_inherit && is_ip_any(flow)) {
wc->masks.nw_tos |= IP_DSCP_MASK;
flow->tunnel.ip_tos = flow->nw_tos & IP_DSCP_MASK;
} else {
flow->tunnel.ip_tos = cfg->tos;
}
/* ECN fields are always inherited. */
if (is_ip_any(flow)) {
wc->masks.nw_tos |= IP_ECN_MASK;
if (IP_ECN_is_ce(flow->nw_tos)) {
flow->tunnel.ip_tos |= IP_ECN_ECT_0;
} else {
flow->tunnel.ip_tos |= flow->nw_tos & IP_ECN_MASK;
}
}
flow->tunnel.flags |= (cfg->dont_fragment ? FLOW_TNL_F_DONT_FRAGMENT : 0)
| (cfg->csum ? FLOW_TNL_F_CSUM : 0)
| (cfg->out_key_present ? FLOW_TNL_F_KEY : 0);
if (pre_flow_str) {
char *post_flow_str = flow_to_string(flow);
char *tnl_str = tnl_port_fmt(tnl_port);
VLOG_DBG("flow sent\n"
"%s"
" pre: %s\n"
"post: %s",
tnl_str, pre_flow_str, post_flow_str);
free(tnl_str);
free(pre_flow_str);
free(post_flow_str);
}
out:
fat_rwlock_unlock(&rwlock);
return out_port;
}
构建外层封装
这里只是将外层封装的数据准备好，放在tnl_push_data，为后面写入报文做准备。
static int
build_tunnel_send(struct xlate_ctx *ctx, const struct xport *xport,
const struct flow *flow, odp_port_t tunnel_odp_port)
{
struct netdev_tnl_build_header_params tnl_params;
struct ovs_action_push_tnl tnl_push_data;
struct xport *out_dev = NULL;
ovs_be32 s_ip = 0, d_ip = 0;
struct in6_addr s_ip6 = in6addr_any;
struct in6_addr d_ip6 = in6addr_any;
struct eth_addr smac;
struct eth_addr dmac;
int err;
char buf_sip6[INET6_ADDRSTRLEN];
char buf_dip6[INET6_ADDRSTRLEN];
//underlay路由查找，因为隧道的remote-ip根据vxlan端口就已经知道了。
err = tnl_route_lookup_flow(flow, &d_ip6, &s_ip6, &out_dev);
if (err) {
xlate_report(ctx, OFT_WARN, "native tunnel routing failed");
return err;
}
xlate_report(ctx, OFT_DETAIL, "tunneling to %s via %s",
ipv6_string_mapped(buf_dip6, &d_ip6),
netdev_get_name(out_dev->netdev));
/* Use mac addr of bridge port of the peer. 使用桥的mac地址作为源mac地址 */
err = netdev_get_etheraddr(out_dev->netdev, &smac);
if (err) {
xlate_report(ctx, OFT_WARN,
"tunnel output device lacks Ethernet address");
return err;
}
d_ip = in6_addr_get_mapped_ipv4(&d_ip6);
if (d_ip) {
s_ip = in6_addr_get_mapped_ipv4(&s_ip6);
}
//获取邻居目的mac地址
err = tnl_neigh_lookup(out_dev->xbridge->name, &d_ip6, &dmac);
if (err) {
xlate_report(ctx, OFT_DETAIL,
"neighbor cache miss for %s on bridge %s, "
"sending %s request",
buf_dip6, out_dev->xbridge->name, d_ip ? "ARP" : "ND");
if (d_ip) {//进行arp请求
tnl_send_arp_request(ctx, out_dev, smac, s_ip, d_ip);
} else {
tnl_send_nd_request(ctx, out_dev, smac, &s_ip6, &d_ip6);
}
return err;
}
if (ctx->xin->xcache) {
struct xc_entry *entry;
entry = xlate_cache_add_entry(ctx->xin->xcache, XC_TNL_NEIGH);
ovs_strlcpy(entry->tnl_neigh_cache.br_name, out_dev->xbridge->name,
sizeof entry->tnl_neigh_cache.br_name);
entry->tnl_neigh_cache.d_ipv6 = d_ip6;
}
xlate_report(ctx, OFT_DETAIL, "tunneling from "ETH_ADDR_FMT" %s"
" to "ETH_ADDR_FMT" %s",
ETH_ADDR_ARGS(smac), ipv6_string_mapped(buf_sip6, &s_ip6),
ETH_ADDR_ARGS(dmac), buf_dip6);
//构建underlay 链路层信息
netdev_init_tnl_build_header_params(&tnl_params, flow, &s_ip6, dmac, smac);
//构建隧道外层信息udp，ip，eth层，保存在tnl_push_data中
err = tnl_port_build_header(xport->ofport, &tnl_push_data, &tnl_params);
if (err) {
return err;
}
//输出端口和隧道端口
tnl_push_data.tnl_port = odp_to_u32(tunnel_odp_port);
tnl_push_data.out_port = odp_to_u32(out_dev->odp_port);
//为报文添加一个隧道封装动作，在执行动作的时候进行最后的报文封装。
odp_put_tnl_push_action(ctx->odp_actions, &tnl_push_data);
return 0;
}
void
odp_put_tnl_push_action(struct ofpbuf *odp_actions,
struct ovs_action_push_tnl *data)
{
int size = offsetof(struct ovs_action_push_tnl, header);
size += data->header_len;
nl_msg_put_unspec(odp_actions, OVS_ACTION_ATTR_TUNNEL_PUSH, data, size);
}
执行push
/* 动作执行回调函数，参数may_steal表示是否可以释放报文 */
static void
dp_execute_cb(void *aux_, struct dp_packet_batch *packets_,
const struct nlattr *a, bool may_steal)
{
......
case OVS_ACTION_ATTR_TUNNEL_PUSH:/* 隧道处理，添加外层标签，需要重入，通常用于处理vxlan等隧道报文 */
if (*depth < MAX_RECIRC_DEPTH) {/* 嵌套深度小于限制的最大深度，那么重入 */
struct dp_packet_batch tnl_pkt;
struct dp_packet_batch *orig_packets_ = packets_;
int err;
if (!may_steal) {/* 如果调用者不希望发送设备接管报文，那么需要复制一份报文进行处理 */
dp_packet_batch_clone(&tnl_pkt, packets_);
packets_ = &tnl_pkt;
dp_packet_batch_reset_cutlen(orig_packets_);
}
dp_packet_batch_apply_cutlen(packets_);
/* 执行隧道标签添加动作 */
err = push_tnl_action(pmd, a, packets_);
if (!err) {/* 添加隧道标签后，需要重入处理 */
(*depth)++;
dp_netdev_recirculate(pmd, packets_);
(*depth)--;
}
return;
}
break;
......
dp_packet_delete_batch(packets_, may_steal);
}
/* 增加隧道标签动作 */
static int
push_tnl_action(const struct dp_netdev_pmd_thread *pmd,/* 当前的轮询进程 */
const struct nlattr *attr,/* 属性 */
struct dp_packet_batch *batch)/* 批量报文处理 */
{
struct tx_port *tun_port;
const struct ovs_action_push_tnl *data;
int err;
data = nl_attr_get(attr);
/* 隧道端口查找 */
tun_port = pmd_tnl_port_cache_lookup(pmd, u32_to_odp(data->tnl_port));
if (!tun_port) {
err = -EINVAL;
goto error;
}
/* 添加隧道头 */
err = netdev_push_header(tun_port->port->netdev, batch, data);
if (!err) {
return 0;
}
error:
dp_packet_delete_batch(batch, true);
return err;
}
/* Push tunnel header (reading from tunnel metadata) and resize
* 'batch->packets' for further processing.
*
* The caller must make sure that 'netdev' support this operation by checking
* that netdev_has_tunnel_push_pop() returns true. */
int
netdev_push_header(const struct netdev *netdev,
struct dp_packet_batch *batch,
const struct ovs_action_push_tnl *data)
{
int i;
for (i = 0; i < batch->count; i++) {/* 逐个处理每一个报文 */
netdev->netdev_class->push_header(batch->packets[i], data);
//关键函数，对封装好的报文的元数据进行初始化，为报文重入做准备。这里的出接口是unerlay路由
//查出来的data->out_port。
pkt_metadata_init(&batch->packets[i]->md, u32_to_odp(data->out_port));
}
return 0;
}
//对于vxlan来说，netdev->netdev_class->push_header函数为
/* 为报文添加隧道头 */
void
netdev_tnl_push_udp_header(struct dp_packet *packet,
const struct ovs_action_push_tnl *data)
{
struct udp_header *udp;
int ip_tot_size;
/* 先压入以太网和IP头 */
udp = netdev_tnl_push_ip_header(packet, data->header, data->header_len, &ip_tot_size);
/* set udp src port 获取随机的udp源端口 */
udp->udp_src = netdev_tnl_get_src_port(packet);
udp->udp_len = htons(ip_tot_size);/* 设置报文的udp总长度 */
if (udp->udp_csum) {/* 进行udp校验码计算 */
uint32_t csum;
if (netdev_tnl_is_header_ipv6(dp_packet_data(packet))) {
csum = packet_csum_pseudoheader6(netdev_tnl_ipv6_hdr(dp_packet_data(packet)));
} else {
csum = packet_csum_pseudoheader(netdev_tnl_ip_hdr(dp_packet_data(packet)));
}
csum = csum_continue(csum, udp, ip_tot_size);
udp->udp_csum = csum_finish(csum);
if (!udp->udp_csum) {
udp->udp_csum = htons(0xffff);
}
}
}
//将输出端口变为输入端口，即将三层端口转换为二层端口
static inline void
pkt_metadata_init(struct pkt_metadata *md, odp_port_t port)
{
/* It can be expensive to zero out all of the tunnel metadata. However,
* we can just zero out ip_dst and the rest of the data will never be
* looked at. */
memset(md, 0, offsetof(struct pkt_metadata, in_port));/* 将端口之前的数据全部初始化为0 */
md->tunnel.ip_dst = 0;
md->tunnel.ipv6_dst = in6addr_any;
md->in_port.odp_port = port;
}
走到这里后，执行dp_netdev_recirculate进行重入，这个时候vxlan报文经过fdb从dpdk物理口离开服务器。
underlay route table
ovs的路由来自两部分，一部分是同步内核的路由，标记为cached。另外一部分是使用ovs-appctl ovs/route/add等命令添加的路由。
[root@ ~]# ovs-appctl ovs/route/show Route Table: Cached: 1.1.1.1/32 dev tun0 SRC 1.1.1.1 Cached: 10.226.137.204/32 dev eth2 SRC 10.226.137.204 Cached: 10.255.9.204/32 dev br-phy SRC 10.255.9.204 Cached: 127.0.0.1/32 dev lo SRC 127.0.0.1 Cached: 169.254.169.110/32 dev tap_metadata SRC 169.254.169.110 Cached: 169.254.169.240/32 dev tap_proxy SRC 169.254.169.240 Cached: 169.254.169.241/32 dev tap_proxy SRC 169.254.169.241 Cached: 169.254.169.250/32 dev tap_metadata SRC 169.254.169.250 Cached: 169.254.169.254/32 dev tap_metadata SRC 169.254.169.254 Cached: 172.17.0.1/32 dev docker0 SRC 172.17.0.1 Cached: ::1/128 dev lo SRC ::1 Cached: 10.226.137.192/27 dev eth2 SRC 10.226.137.204 Cached: 10.226.137.224/27 dev br-phy GW 10.255.9.193 SRC 10.255.9.204 Cached: 10.254.225.0/27 dev br-phy GW 10.255.9.193 SRC 10.255.9.204 Cached: 10.254.225.224/27 dev br-phy GW 10.255.9.193 SRC 10.255.9.204 Cached: 10.255.8.192/27 dev br-phy GW 10.255.9.193 SRC 10.255.9.204 Cached: 10.255.9.192/27 dev br-phy SRC 10.255.9.204 Cached: 1.1.1.0/24 dev br-phy GW 10.255.9.193 SRC 10.255.9.204 Cached: 10.226.0.0/16 dev eth2 GW 10.226.137.193 SRC 10.226.137.204 Cached: 172.17.0.0/16 dev docker0 SRC 172.17.0.1 Cached: 127.0.0.0/8 dev lo SRC 127.0.0.1 Cached: 0.0.0.0/0 dev eth2 GW 10.226.137.193 SRC 10.226.137.204 Cached: fe80::/64 dev port-r6kxee6d3t SRC fe80::80a0:94ff:fedc:43b [root@A04-R08-I137-204-9320C72 ~]#
路由模块初始化
/* Users of the route_table module should register themselves with this
* function before making any other route_table function calls. */
void
route_table_init(void)
OVS_EXCLUDED(route_table_mutex)
{
ovs_mutex_lock(&route_table_mutex);
ovs_assert(!nln);
ovs_assert(!route_notifier);
ovs_assert(!route6_notifier);
ovs_router_init();
nln = nln_create(NETLINK_ROUTE, (nln_parse_func *) route_table_parse,
&rtmsg);
route_notifier =
nln_notifier_create(nln, RTNLGRP_IPV4_ROUTE,
(nln_notify_func *) route_table_change, NULL);
route6_notifier =
nln_notifier_create(nln, RTNLGRP_IPV6_ROUTE,
(nln_notify_func *) route_table_change, NULL);
route_table_reset();
name_table_init();
ovs_mutex_unlock(&route_table_mutex);
}
/* May not be called more than once. */
void
ovs_router_init(void)
{
classifier_init(&cls, NULL);//使用分类器实现路由查找。
unixctl_command_register("ovs/route/add", "ip_addr/prefix_len out_br_name gw", 2, 3,
ovs_router_add, NULL);
unixctl_command_register("ovs/route/show", "", 0, 0, ovs_router_show, NULL);
unixctl_command_register("ovs/route/del", "ip_addr/prefix_len", 1, 1, ovs_router_del,
NULL);
unixctl_command_register("ovs/route/lookup", "ip_addr", 1, 1,
ovs_router_lookup_cmd, NULL);
}
使用netlink监听内核路由事件
//该函数设置路由事件变化标志
static void
route_table_change(const struct route_table_msg *change OVS_UNUSED,
void *aux OVS_UNUSED)
{
route_table_valid = false;
}
/* Run periodically to update the locally maintained routing table. */
//周期性处理路由变化函数
void
route_table_run(void)
OVS_EXCLUDED(route_table_mutex)
{
ovs_mutex_lock(&route_table_mutex);
if (nln) {
rtnetlink_run();
nln_run(nln);
if (!route_table_valid) {
route_table_reset();
}
}
ovs_mutex_unlock(&route_table_mutex);
}
static int
route_table_reset(void)
{
struct nl_dump dump;
struct rtgenmsg *rtmsg;
uint64_t reply_stub[NL_DUMP_BUFSIZE / 8];
struct ofpbuf request, reply, buf;
route_map_clear();//删除所有路由
netdev_get_addrs_list_flush();
route_table_valid = true;
rt_change_seq++;
ofpbuf_init(&request, 0);
nl_msg_put_nlmsghdr(&request, sizeof *rtmsg, RTM_GETROUTE, NLM_F_REQUEST);
rtmsg = ofpbuf_put_zeros(&request, sizeof *rtmsg);
rtmsg->rtgen_family = AF_UNSPEC;
//重新添加所有路由
nl_dump_start(&dump, NETLINK_ROUTE, &request);
ofpbuf_uninit(&request);
ofpbuf_use_stub(&buf, reply_stub, sizeof reply_stub);
while (nl_dump_next(&dump, &reply, &buf)) {
struct route_table_msg msg;
if (route_table_parse(&reply, &msg)) {
route_table_handle_msg(&msg);
}
}
ofpbuf_uninit(&buf);
return nl_dump_done(&dump);
}
underlay neighbor
dpdk-ovs为隧道维护了一个underlay neighbor信息。
static void
dp_initialize(void)
{
static struct ovsthread_once once = OVSTHREAD_ONCE_INITIALIZER;
if (ovsthread_once_start(&once)) {
int i;
tnl_conf_seq = seq_create();
dpctl_unixctl_register();
tnl_port_map_init();
tnl_neigh_cache_init();
route_table_init();
for (i = 0; i < ARRAY_SIZE(base_dpif_classes); i++) {
dp_register_provider(base_dpif_classes[i]);
}
ovsthread_once_done(&once);
}
}
void
tnl_neigh_cache_init(void)
{
unixctl_command_register("tnl/arp/show", "", 0, 0, tnl_neigh_cache_show, NULL);
unixctl_command_register("tnl/arp/set", "BRIDGE IP MAC", 3, 3, tnl_neigh_cache_add, NULL);
unixctl_command_register("tnl/arp/flush", "", 0, 0, tnl_neigh_cache_flush, NULL);
unixctl_command_register("tnl/neigh/show", "", 0, 0, tnl_neigh_cache_show, NULL);
unixctl_command_register("tnl/neigh/set", "BRIDGE IP MAC", 3, 3, tnl_neigh_cache_add, NULL);
unixctl_command_register("tnl/neigh/flush", "", 0, 0, tnl_neigh_cache_flush, NULL);
}
使用命令查看邻居
[root@ ~]# ovs-appctl tnl/arp/show IP MAC Bridge ========================================================================== 10.255.9.193 9c:e8:95:0f:49:16 br-phy [root@ ~]#
ovs-dpdk通过在数据面处理arp报文和neigh报文来获取邻居信息。
/* 执行动作转换 */
static void
do_xlate_actions(const struct ofpact *ofpacts, size_t ofpacts_len,
struct xlate_ctx *ctx)
{
struct flow_wildcards *wc = ctx->wc;/* 通配符 */
struct flow *flow = &ctx->xin->flow;/* 需要处理的流 */
const struct ofpact *a;
/* 只有开启隧道的时候才启用邻居侦听，主要是侦听arp包和icmpv6报文进行邻居学习 */
if (ovs_native_tunneling_is_on(ctx->xbridge->ofproto)) {
tnl_neigh_snoop(flow, wc, ctx->xbridge->name);
}
/* dl_type already in the mask, not set below. */
......
}
//进行邻居学习。
int
tnl_neigh_snoop(const struct flow *flow, struct flow_wildcards *wc,
const char name[IFNAMSIZ])
{
int res;
res = tnl_arp_snoop(flow, wc, name);
if (res != EINVAL) {
return res;
}
return tnl_nd_snoop(flow, wc, name);
}
static int
tnl_arp_snoop(const struct flow *flow, struct flow_wildcards *wc,
const char name[IFNAMSIZ])
{
if (flow->dl_type != htons(ETH_TYPE_ARP)
|| FLOW_WC_GET_AND_MASK_WC(flow, wc, nw_proto) != ARP_OP_REPLY
|| eth_addr_is_zero(FLOW_WC_GET_AND_MASK_WC(flow, wc, arp_sha))) {
return EINVAL;
}
tnl_arp_set(name, FLOW_WC_GET_AND_MASK_WC(flow, wc, nw_src), flow->arp_sha);
return 0;
}
static int
tnl_nd_snoop(const struct flow *flow, struct flow_wildcards *wc,
const char name[IFNAMSIZ])
{
if (!is_nd(flow, wc) || flow->tp_src != htons(ND_NEIGHBOR_ADVERT)) {
return EINVAL;
}
/* - RFC4861 says Neighbor Advertisements sent in response to unicast Neighbor
* Solicitations SHOULD include the Target link-layer address. However, Linux
* doesn't. So, the response to Solicitations sent by OVS will include the
* TLL address and other Advertisements not including it can be ignored.
* - OVS flow extract can set this field to zero in case of packet parsing errors.
* For details refer miniflow_extract()*/
if (eth_addr_is_zero(FLOW_WC_GET_AND_MASK_WC(flow, wc, arp_tha))) {
return EINVAL;
}
memset(&wc->masks.ipv6_src, 0xff, sizeof wc->masks.ipv6_src);
memset(&wc->masks.ipv6_dst, 0xff, sizeof wc->masks.ipv6_dst);
memset(&wc->masks.nd_target, 0xff, sizeof wc->masks.nd_target);
tnl_neigh_set__(name, &flow->nd_target, flow->arp_tha);
return 0;
}
邻居定期老化
void
tnl_neigh_cache_run(void)
{
struct tnl_neigh_entry *neigh;
bool changed = false;
ovs_mutex_lock(&mutex);
CMAP_FOR_EACH(neigh, cmap_node, &table) {
if (neigh->expires <= time_now()) {
tnl_neigh_delete(neigh);
changed = true;
}
}
ovs_mutex_unlock(&mutex);
if (changed) {
seq_change(tnl_conf_seq);
}
}
原文链接：https://segmentfault.com/a/1190000020337904
