技术分享| 如何使用Prometheus实现系统监控报警邮件通知

news2024/11/15 14:03:39

上一篇关于Prometheus的文章中说到了Prometheus是如何实现进程监控。在实际的线上环境中，当系统进程出现异常后需要实时通知到值班运维人员，去检查系统是否还正常运转。下面我们就介绍下基于Prometheus如何实现监控报警通知。

Prometheus的报警通知，是利用其组件AlertManager，Alertmanager接收Prometheus等客户端发来的警报，之后通过分组，删除重复等处理，并将它们通过路由发送给正确的接收器。告警方式可以按照不同的规则发送给不同的模块负责人，Alertmanager支持Wechat, Email, Webhook等告警方式, 其中Webhook可以接入钉钉等聊天工具。

在这里插入图片描述

报警流程

Prometheus配置监控规则
监控对象触发阈值
阈值超出持续时间
推送告警到Alertmanager
Alertmanager处理告警信息
1）分组(group)：类似告警合并为一个通知。
2）静默(silences)：不通知，系统升级时使用。
3）抑制(inhibition): 只通知一次，相同内容不再通知。
Alertmanager发送通知到媒体，邮箱，钉钉，企业微信等接收到通知

安装部署AlertManager

部署alertermanager

下载二进制文件

wget https://github.com/prometheus/alertmanager/releases/download/v0.24.0/alertmanager-0.24.0.linux-amd64.tar.gz

tar zxvf alertmanager-0.24.0.linux-amd64.tar.gz
mv alertmanager-0.24.0.linux-amd64 /apps/alertmanager

创建alertermanager服务

vim /etc/systemd/system/alertmanager.service

[Unit]
Description=alertmanager
Documentation=https://prometheus.io/
After=network.target

[Service]
User=root
Type=simple
#不能有单引号和双引号
ExecStart=/home/prometheus/alertmanager/alertmanager/alertmanager --config.file=/home/prometheus/alertmanager/alertmanager/alertmanager.yml --storage.path=/home/prometheus/alertmanager/alertmanager/data --web.listen-address=:19093 --cluster.listen-address=0.0.0.0:19094 --web.external-url=http://192.168.1.108:19093
Restart=on-failure

[Install]
WantedBy=multi-user.target

启动服务：

systemctl daemon-reload
systemctl enable --now alertmanager
systemctl status alertmanager

访问 192.168.1.108:19093 为alertmanager管理页面：

在这里插入图片描述

Alertmanager配置

配置文件详解，以邮箱告警为例：

vim /home/prometheus/alertmanager/alertmanager/alertmanager.yml
#邮件发送者
global:
  resolve_timeout: 30s
  smtp_smarthost: 'smtp.qq.com:465' 
  smtp_from: '809xxx59@qq.com' 
  smtp_auth_username: '80xxx4859@qq.com' 
  smtp_auth_password: 'xxxxxxxxvpobcee'
  smtp_hello: '@qq.com'
  smtp_require_tls: false

templates:
  - '/home/prometheus/alertmanager/alertmanager/tmpl/email.tmpl'  #增加templates配置
route:
  group_by: ['alertname']
  group_wait: 30s
  group_interval: 5m
  repeat_interval: 5m
  receiver: 'email'
  routes:
  - receiver: dingtalk-webhook
    group_wait: 10s
  - receiver: email
    group_wait: 10s
receivers:
  - name: 'email'
    email_configs:
      - to: 'niuming@dync.cc'
        send_resolved: true
inhibit_rules:
  - source_match:
      severity: 'critical'
    target_match:
      severity: 'warning'
    equal: ['alertname', 'dev', 'instance']

项目 Value

在这里插入图片描述

Prometheus规则

新建规则文件，配置分组信息，告警阈值和时间，告警标签和注释等。

指标表达式采用PromQL语句，多数指标单位为bytes字节，需要转换成KMG，例如2M=210241024。

Prometheus规则文件，对于邮箱，钉钉或企业微信，该文件通用：

vim /home/prometheus/prometheus/rule/qtalk_auth.yaml
groups:
 - name: qtalk_auth 程异常退出
   rules:
   - alert: 应用进程 qtalk_auth 异常退出 # 告警名称
     expr: (namedprocess_namegroup_num_procs{groupname="map[:qtalk_auth]"}) == 0
     for: 30s # 满足告警条件持续时间多久后，才会发送告警
     labels: #标签项
        severity: error
        ip: 192.168.1.108
     annotations: # 解析项，详细解释告警信息
         summary: "进程异常报警 Alert {{ $labels.instance }} ，异常停止超过30秒."
         description: "{{$labels.ip}} 进程{{$labels.groupname}} 异常停止！请立即查看!"

在这里插入图片描述

检验prometheus报警规则文件，显示SUCCESS：

/home/prometheus/prometheus/promtool check rules rule/qtalk_auth.yml
Checking rule/qtalk_auth.yml
  SUCCESS: 1 rules found

Prometheus配置

配置Prometheus文件，alertmanagers服务器的IP和端口，prometheus服务器规则文件的路径：

vim /home/Prometheus/prometheus/prometheus.yml
# my global config
global:
  scrape_interval: 15s # Set the scrape interval to every 15 seconds. Default is every 1 minute.
  evaluation_interval: 15s # Evaluate rules every 15 seconds. The default is every 1 minute.
  # scrape_timeout is set to the global default (10s).

# Alertmanager configuration
alerting:
  alertmanagers:
    - static_configs:
        - targets: ["192.168.1.108:19093"]
           #- alertmanager:["192.168.1.108:19093"]

# Load rules once and periodically evaluate them according to the global 'evaluation_interval'.
rule_files:
 - "rule/*.yml"
  # - "first_rules.yml"
  # - "second_rules.yml"

# A scrape configuration containing exactly one endpoint to scrape:
# Here it's Prometheus itself.
scrape_configs:
  # The job name is added as a label `job=<job_name>` to any timeseries scraped from this config.
  - job_name: "prometheus"

    # metrics_path defaults to '/metrics'
    # scheme defaults to 'http'.

    static_configs:
      - targets: ["localhost:9090"]

  - job_name: 'process'
    static_configs:
      - targets: ['192.168.1.108:9256']

重启Prometheus服务：