【STM32+HAL库】---- 硬件IIC驱动0.96OLED

news2024/12/23 5:02:09
硬件开发板:STM32G0B1RET6
软件平台:cubemax+keil+VScode

内容原著声明

代码借鉴学习于以下文章:
STM32 使用硬件IIC驱动0.96寸4针IOLED显示器(HAL库)

1 新建cubemax工程

1.1 配置系统时钟RCC

image

1.2 配置引脚

image

1.3 导出工程

略…

2 代码

2.1 OLED_IIC_Config.h

/**
 * ************************************************************************
 * 
 * @file OLED_IIC_Config.h
 * @author zxr
 * @brief IIC和OLED基础配置头文件
 * 
 * ************************************************************************
 * @copyright Copyright (c) 2024 zxr 
 * ************************************************************************
 */
#ifndef OLED_IIC_CONFIG_H
#define OLED_IIC_CONFIG_H

#include "main.h"
#include "stm32g0xx_hal.h"

#define  OLED_ADDRESS 		0x78	//OLED地址  默认0x78

//OLED命令控制宏
#define  	LEFT 			0x27
#define  	RIGHT 			0x26
#define  	UP 			0X29
#define  	DOWM			0x2A
#define  	ON			0xA7
#define  	OFF			0xA6


#define    	SCREEN_PAGE_NUM		(8)     //屏幕页数
#define    	SCREEN_PAGEDATA_NUM	(128)   //每页的数据个数
#define		SCREEN_COLUMN		(128)   //列数
#define  	SCREEN_ROW		(64)    //行数


void WriteCmd(unsigned char cmd);		//写命令
void WriteDat(unsigned char dat);		//写数据
void OLED_ON(void);				//开启OLED
void OLED_OFF(void);				//休眠OLED
void OLED_CLS(void);				//OLED清屏函数
void OLED_Init(void);				//OLED初始化函数
void OLED_RefreshRAM(void);			//更新数据缓冲区
void OLED_ClearRAM(void);			//清除数据缓冲区
void OLED_SetPixel(signed short int x, signed short int y, unsigned char set_pixel);	//设置坐标像素点数据
void OLED_DisplayMode(unsigned char mode);	//屏幕内容取反显示
void OLED_IntensityControl(unsigned char intensity);//屏幕亮度调节
void OLED_Shift(unsigned char shift_num);	//全屏内容偏移指定距离
void OLED_HorizontalShift(unsigned char start_page,unsigned char end_page,unsigned char direction);	//屏幕内容水平方向滚动播放

#endif  /*OLED_IIC_CONFIG_H*/

2.2 OLED_IIC_Config.c

/**
 * ************************************************************************
 * 
 * @file OLED_IIC_Config.c
 * @author zxr
 * @brief IIC初始化配置和OLED屏幕的底层驱动
 * 
 * ************************************************************************
 * @copyright Copyright (c) 2024 zxr 
 * ************************************************************************
 */
#include "OLED_IIC_Config.h"
#include "i2c.h"
#include "MyDelay.h"

unsigned char  ScreenBuffer[SCREEN_PAGE_NUM][SCREEN_COLUMN];//定义屏幕的存储空间



/**
* @brief  向OLED寄存器地址写一个byte的数据
* @param  addr:寄存器地址
* @param  data:要写入的数据
* @retval 无
*/
void I2C_WriteByte(uint8_t addr, uint8_t data)
{
	extern I2C_HandleTypeDef hi2c1;
	HAL_I2C_Mem_Write(&hi2c1, OLED_ADDRESS, addr, I2C_MEMADD_SIZE_8BIT, &data, 1, 10);
}

/**
 * ************************************************************************
 * @brief 写命令函数
 * @param[in] cmd  写入的命令
 * ************************************************************************
 */
void WriteCmd(unsigned char cmd)
{
	I2C_WriteByte(0x00, cmd);
}

/**
 * ************************************************************************
 * @brief 写数据函数
 * @param[in] dat  写入的数据
 * ************************************************************************
 */
void WriteDat(unsigned char dat)
{
	I2C_WriteByte(0x40, dat);
}

/**
 * ************************************************************************
 * @brief 开启OLED
 * ************************************************************************
 */
void OLED_ON(void)
{
	WriteCmd(0X8D);  //设置电荷泵
	WriteCmd(0X14);  //开启电荷泵
	WriteCmd(0XAF);  //OLED唤醒
}

/**
 * ************************************************************************
 * @brief 休眠OLED
 * ************************************************************************
 */
void OLED_OFF(void)
{
	WriteCmd(0X8D);  //设置电荷泵
	WriteCmd(0X10);  //关闭电荷泵
	WriteCmd(0XAE);  //OLED休眠
}

/**
 * ************************************************************************
 * @brief OLED清屏函数
 * ************************************************************************
 */
void OLED_CLS(void)//清屏
{
	unsigned char m,n;
	for(m=0;m<8;m++)
	{
		WriteCmd(0xb0+m);	//page0-page1
		WriteCmd(0x00);		//low column start address
		WriteCmd(0x10);		//high column start address
		for(n=0;n<128;n++)
		{
			WriteDat(0x00);
		}
	}
}

/**
 * ************************************************************************
 * @brief OLED初始化函数
 * ************************************************************************
 */
void OLED_Init(void)
{
	WriteCmd(0xAE); //显示关闭
	WriteCmd(0x20);	//设置内存寻址模式
	WriteCmd(0x10);	//00,水平寻址模式;01,垂直寻址模式;10,页寻址模式(复位);11,无效
	WriteCmd(0xb0);	//设置页寻址模式的页起始地址,0-7
	WriteCmd(0xc8);	//设置COM输出扫描方向
	WriteCmd(0x00); //-设置低列地址
	WriteCmd(0x10); //-设置高列地址
	WriteCmd(0x40); //-设置起始行地址
	WriteCmd(0x81); //设置对比度控制寄存器
	WriteCmd(0xff); //亮度调节 0x00~0xff
	WriteCmd(0xa1); //设置段重新映射0到127
	WriteCmd(0xa6); //设置正常显示
	WriteCmd(0xa8); //设置复用比例(1到64)
	WriteCmd(0x3F); //
	WriteCmd(0xa4); //0xa4,输出遵循RAM内容;0xa5,输出忽略RAM内容
	WriteCmd(0xd3); //设置显示偏移
	WriteCmd(0x00); //不偏移
	WriteCmd(0xd5); //--set display clock divide ratio/oscillator frequency
	WriteCmd(0xf0); //--set divide ratio
	WriteCmd(0xd9); //--set pre-charge period
	WriteCmd(0x22); //
	WriteCmd(0xda); //--set com pins hardware configuration
	WriteCmd(0x12);
	WriteCmd(0xdb); //--set vcomh
	WriteCmd(0x20); //0x20,0.77xVcc
	WriteCmd(0x8d); //设置DC-DC使能
	WriteCmd(0x14); //
	WriteCmd(0xaf); //--turn on oled panel
	OLED_CLS();
}

/**
 * ************************************************************************
 * @brief 更新数据缓冲区
 * ************************************************************************
 */
void OLED_RefreshRAM(void)
{
	// 页寻址模式填充
	for(unsigned short int m = 0; m < SCREEN_ROW/8; m++)
	{
		WriteCmd(0xb0+m);		//设置页地址b0~b7
		WriteCmd(0x00);			//设置显示位置—列低地址00-0f
		WriteCmd(0x10);			//设置显示位置—列高地址10-1f
		for(unsigned short int n = 0; n < SCREEN_COLUMN; n++)
		{
			WriteDat(ScreenBuffer[m][n]);
		}
	} 
}

/**
 * ************************************************************************
 * @brief 清除数据缓冲区
 * ************************************************************************
 */
void OLED_ClearRAM(void)
{
	for(unsigned short int m = 0; m < SCREEN_ROW/8; m++)
	{
		for(unsigned short int n = 0; n < SCREEN_COLUMN; n++)
		{
			ScreenBuffer[m][n] = 0x00;
		}
	}
}

/**
 * ************************************************************************
 * @brief 设置坐标像素点数据
 * 
 * @param[in] x  			起始点横坐标(x:0~127)
 * @param[in] y  			起始点纵坐标(y:0~63)
 * @param[in] set_pixel  	该点的数据  SET_PIXEL = 1, RESET_PIXEL = 0
 * 
 * ************************************************************************
 */
void OLED_SetPixel(signed short int x, signed short int y, unsigned char set_pixel)
{ 
	if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) {
		if(set_pixel){
				ScreenBuffer[y/8][x] |= (0x01 << (y%8));
		}  
		else{
				ScreenBuffer[y/8][x] &= ~(0x01 << (y%8));
		}
	}
}

/**
 * ************************************************************************
 * @brief 屏幕内容取反显示
 * 
 * @param[in] mode  开关
 * 					开	ON	0xA7	点亮全屏
 *  				关	OFF	0xA6	默认此模式,设置像素点亮
 * 
 * ************************************************************************
 */
void OLED_DisplayMode(unsigned char mode)
{
	WriteCmd(mode);
}

/**
 * ************************************************************************
 * @brief 屏幕亮度调节
 * 
 * @param[in] intensity  亮度大小(0~255),默认为0x7f
 * 
 * ************************************************************************
 */
void OLED_IntensityControl(unsigned char intensity)
{
	WriteCmd(0x81);
	WriteCmd(intensity);
}

/**
 * ************************************************************************
 * @brief 全屏内容偏移指定距离
 * 
 * @param[in] shift_num  偏移距离(0~63)
 * 
 * ************************************************************************
 */
void OLED_Shift(unsigned char shift_num)
{
	for(unsigned char i = 0; i < shift_num; i++)
		{
			WriteCmd(0xd3);//设置显示偏移,垂直向上偏移
			WriteCmd(i);//偏移量
			HAL_Delay(10);//延时时间
		}
}


/**
 * ************************************************************************
 * @brief 屏幕内容水平方向滚动播放
 * 
 * @param[in] start_page  	开始页数	(0~7)
 * @param[in] end_page  	结束页数	(0~7)
 * @param[in] direction  	滚动方向
 * 								左		LEFT	0x27
 * 								右		RIGHT	0x26
 * @note 在开始页数和结束页数之间的内容才会滚动播放,且写命令顺序不得改变
 * ************************************************************************
 */
void OLED_HorizontalShift(unsigned char start_page,unsigned char end_page,unsigned char direction)
{
	WriteCmd(0x2e);  //关闭滚动

	WriteCmd(direction);//设置滚动方向
	WriteCmd(0x00);//虚拟字节设置,默认为0x00
	WriteCmd(start_page);//设置开始页地址
	WriteCmd(0x05);//设置每个滚动步骤之间的时间间隔的帧频
	WriteCmd(end_page);//设置结束页地址
	WriteCmd(0x00);//虚拟字节设置,默认为0x00
	WriteCmd(0xff);//虚拟字节设置,默认为0xff

	WriteCmd(0x2f);//开启滚动-0x2f,禁用滚动-0x2e,禁用需要重写数据
}


2.3 OLED_Function.h

/**
 * ************************************************************************
 * 
 * @file OLED_Function.h
 * @author zxr
 * @brief OLED功能函数驱动头文件
 * 
 * ************************************************************************
 * @copyright Copyright (c) 2024 zxr 
 * ************************************************************************
 */
#ifndef _OLED_FUNCTION_H_
#define _OLED_FUNCTION_H_

#include "OLED_IIC_Config.h"

//字符串显示函数
void OLED_ShowStr(signed short int x, signed short int y, unsigned char ch[], unsigned char TextSize);
//中文汉字显示函数
void OLED_ShowChinese(signed short int x, signed short int y, unsigned char* ch);
//BMP图片显示函数
void OLED_ShowBMP(signed short int x0,signed short int y0,signed short int L,signed short int H,const unsigned char BMP[]);

#endif /* _OLED_FUNCTION_H_ */

2.4 OLED_Function.c

#include "OLED_Function.h"
#include "OLED_Front.h"

/**
 * ************************************************************************
 * @brief 字符串显示函数
 * 
 * @param[in] x  	起始点横坐标(0~127)
 * @param[in] y  	起始点纵坐标(0~63)
 * @param[in] ch  	字符串(通过双引号引入)
 * @param[in] TextSize  字符大小(1:6*8 ;2:8*16)
 * 
 * ************************************************************************
 */
void OLED_ShowStr(signed short int x, signed short int y, unsigned char ch[], unsigned char TextSize)
{ 
	if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) 
	{
		int32_t c = 0;
		unsigned char j = 0;
	
		switch(TextSize)
		{
			case 1:
			{
				while(ch[j] != '\0')
				{
					c = ch[j] - 32;
					if(c < 0)	//无效字符
						break;
					
					if(x >= 125 || (127-x < 6))//一行最大显示字符数:21字节显示,多出两列,不显示 || 剩余列小于6不能显示完整字符,换行显示
					{
						x = 0;
						y += 8;//换行显示
						if(63 - y < 8)	// 不足以显示一行时不显示
							break;
					}
					for(unsigned char m = 0; m < 6; m++)
					{
						for(unsigned char n = 0; n < 8; n++)
						{
							OLED_SetPixel(x+m, y+n, (F6x8[c][m] >> n) & 0x01);
						}
					}
					x += 6;
					j++;
				}
			}break;
			case 2:
			{
				while(ch[j] != '\0')
				{
					c = ch[j] - 32;
					if(c < 0)	//无效字符
						break;
					
					if(x >= 127 || (127-x < 8))//16字节显示 || 剩余列小于8不能显示完整字符,换行显示
					{
						x = 0;
						y += 16;//换行显示
						if(63 - y < 16)	// 不足以显示一行时不显示
							break;
					}
					for(unsigned char m = 0; m < 2; m++)
					{
						for(unsigned char n = 0; n < 8; n++)
						{
							for(unsigned char i = 0; i < 8; i++)
							{
								OLED_SetPixel(x+n, y+i+m*8, (F8X16[c][n+m*8] >> i) & 0x01);
							}
						}	
					}
					x += 8;
					j++;
				}
			}break;
		}
	}
	OLED_RefreshRAM();
}


/**
 * ************************************************************************
 * @brief 中文汉字显示函数
 * 
 * @param[in] x  	起始点横坐标(0~127)
 * @param[in] y  	起始点纵坐标(0~63)
 * @param[in] ch  	汉字字模库索引
 * 
 * @example OLED_ShowCN(0,0,"字");
 * ************************************************************************
 */
void OLED_ShowChinese(signed short int x, signed short int y, unsigned char* ch)
{
	if (x >= 0 && x < SCREEN_COLUMN && y >= 0 && y < SCREEN_ROW) {
		int32_t  len = 0,offset = sizeof(F16x16_CN[0].index);
		
		while(ch[len] != '\0')
		{
			if(x >= 127 || (127-x < 16))//8个汉字显示||剩余列小于16不能显示完整字符,换行显示
			{
				x = 0;
				y += 16;
				if(63 - y < 16)	// 不足以显示一行时不显示
					break;
			}
					
			//需要处理输入数据大于显示数据的问题
			for(unsigned char i = 0; i < sizeof(F16x16_CN)/sizeof(GB2312_CN); i++)
			{
				if(((F16x16_CN[i].index[0] == ch[len]) && (F16x16_CN[i].index[1] == ch[len+1]))){
						for(unsigned char m = 0; m < 2; m++)	//页
						{
							for(unsigned char n = 0; n < 16; n++) // 列
							{
								for(unsigned char j = 0; j < 8; j++)	// 行
								{
									OLED_SetPixel(x+n, y+j+m*8, (F16x16_CN[i].encoder[n+m*16] >> j) & 0x01);
								}
							}
						}			
						x += 16;
						len += offset;
						break;
				}
				else if(F16x16_CN[i].index[0] == ch[len] && ch[len] == 0x20){
					for(unsigned char m = 0; m < 2; m++)
					{
						for(unsigned char n = 0; n < 16; n++)
						{
							for(unsigned char j = 0; j < 8; j++)
							{
								OLED_SetPixel(x+n, y+j+m*8, (F16x16_CN[i].encoder[n+m*16] >> j) & 0x01);
							}								
						}	
					}			
					x += 16; 
					len++;
					break;
				}
			}
		}
	}
	OLED_RefreshRAM();
}


/**
 * ************************************************************************
 * @brief BMP图片显示函数
 * 
 * @param[in] x0  	起始点横坐标(0~127)
 * @param[in] y0  	起始点纵坐标(0~63)
 * @param[in] L  	BMP图片宽度
 * @param[in] H  	BMP图片高度
 * @param[in] BMP  	图片取模地址
 * 
 * @example OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_0);
 * ************************************************************************
 */
void OLED_ShowBMP(signed short int x0,signed short int y0,signed short int L,signed short int H,const unsigned char BMP[])
{
	if (x0 >= 0 && x0 < SCREEN_COLUMN && x0+L <= SCREEN_ROW &&\
		y0 >= 0 && y0 < SCREEN_COLUMN && y0+H <= SCREEN_ROW) {
		
		unsigned char *p = (unsigned char *)BMP;
		for(signed short int y = y0; y < y0+H; y+=8)
		{
			for(signed short int x = x0; x < x0+L; x++)
			{
				for(signed short int i = 0; i < 8; i++)
				{
					OLED_SetPixel(x, y+i, ((*p) >> i) & 0x01);
				}
				p++;
			}
		}
	}

	OLED_RefreshRAM();
}


2.5 OLED_Front.h

点击查看代码

#ifndef _OLED_FRONT_H_
#define _OLED_FRONT_H_


/**
 * ************************************************************************
 * @brief 大小6*8的字符取模库
 * ************************************************************************
 */
static unsigned char F6x8[][6] =
{
	0x00, 0x00, 0x00, 0x00, 0x00, 0x00,// sp
	0x00, 0x00, 0x00, 0x2f, 0x00, 0x00,// !
	0x00, 0x00, 0x07, 0x00, 0x07, 0x00,// "
	0x00, 0x14, 0x7f, 0x14, 0x7f, 0x14,// #
	0x00, 0x24, 0x2a, 0x7f, 0x2a, 0x12,// $
	0x00, 0x62, 0x64, 0x08, 0x13, 0x23,// %
	0x00, 0x36, 0x49, 0x55, 0x22, 0x50,// &
	0x00, 0x00, 0x05, 0x03, 0x00, 0x00,// '
	0x00, 0x00, 0x1c, 0x22, 0x41, 0x00,// (
	0x00, 0x00, 0x41, 0x22, 0x1c, 0x00,// )
	0x00, 0x14, 0x08, 0x3E, 0x08, 0x14,// *
	0x00, 0x08, 0x08, 0x3E, 0x08, 0x08,// +
	0x00, 0x00, 0x00, 0xA0, 0x60, 0x00,// ,
	0x00, 0x08, 0x08, 0x08, 0x08, 0x08,// -
	0x00, 0x00, 0x60, 0x60, 0x00, 0x00,// .
	0x00, 0x20, 0x10, 0x08, 0x04, 0x02,// /
	0x00, 0x3E, 0x51, 0x49, 0x45, 0x3E,// 0
	0x00, 0x00, 0x42, 0x7F, 0x40, 0x00,// 1
	0x00, 0x42, 0x61, 0x51, 0x49, 0x46,// 2
	0x00, 0x21, 0x41, 0x45, 0x4B, 0x31,// 3
	0x00, 0x18, 0x14, 0x12, 0x7F, 0x10,// 4
	0x00, 0x27, 0x45, 0x45, 0x45, 0x39,// 5
	0x00, 0x3C, 0x4A, 0x49, 0x49, 0x30,// 6
	0x00, 0x01, 0x71, 0x09, 0x05, 0x03,// 7
	0x00, 0x36, 0x49, 0x49, 0x49, 0x36,// 8
	0x00, 0x06, 0x49, 0x49, 0x29, 0x1E,// 9
	0x00, 0x00, 0x36, 0x36, 0x00, 0x00,// :
	0x00, 0x00, 0x56, 0x36, 0x00, 0x00,// ;
	0x00, 0x08, 0x14, 0x22, 0x41, 0x00,// <
	0x00, 0x14, 0x14, 0x14, 0x14, 0x14,// =
	0x00, 0x00, 0x41, 0x22, 0x14, 0x08,// >
	0x00, 0x02, 0x01, 0x51, 0x09, 0x06,// ?
	0x00, 0x32, 0x49, 0x59, 0x51, 0x3E,// @
	0x00, 0x7C, 0x12, 0x11, 0x12, 0x7C,// A
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x36,// B
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x22,// C
	0x00, 0x7F, 0x41, 0x41, 0x22, 0x1C,// D
	0x00, 0x7F, 0x49, 0x49, 0x49, 0x41,// E
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x01,// F
	0x00, 0x3E, 0x41, 0x49, 0x49, 0x7A,// G
	0x00, 0x7F, 0x08, 0x08, 0x08, 0x7F,// H
	0x00, 0x00, 0x41, 0x7F, 0x41, 0x00,// I
	0x00, 0x20, 0x40, 0x41, 0x3F, 0x01,// J
	0x00, 0x7F, 0x08, 0x14, 0x22, 0x41,// K
	0x00, 0x7F, 0x40, 0x40, 0x40, 0x40,// L
	0x00, 0x7F, 0x02, 0x0C, 0x02, 0x7F,// M
	0x00, 0x7F, 0x04, 0x08, 0x10, 0x7F,// N
	0x00, 0x3E, 0x41, 0x41, 0x41, 0x3E,// O
	0x00, 0x7F, 0x09, 0x09, 0x09, 0x06,// P
	0x00, 0x3E, 0x41, 0x51, 0x21, 0x5E,// Q
	0x00, 0x7F, 0x09, 0x19, 0x29, 0x46,// R
	0x00, 0x46, 0x49, 0x49, 0x49, 0x31,// S
	0x00, 0x01, 0x01, 0x7F, 0x01, 0x01,// T
	0x00, 0x3F, 0x40, 0x40, 0x40, 0x3F,// U
	0x00, 0x1F, 0x20, 0x40, 0x20, 0x1F,// V
	0x00, 0x3F, 0x40, 0x38, 0x40, 0x3F,// W
	0x00, 0x63, 0x14, 0x08, 0x14, 0x63,// X
	0x00, 0x07, 0x08, 0x70, 0x08, 0x07,// Y
	0x00, 0x61, 0x51, 0x49, 0x45, 0x43,// Z
	0x00, 0x00, 0x7F, 0x41, 0x41, 0x00,// [
	0x00, 0x55, 0x2A, 0x55, 0x2A, 0x55,// 55
	0x00, 0x00, 0x41, 0x41, 0x7F, 0x00,// ]
	0x00, 0x04, 0x02, 0x01, 0x02, 0x04,// ^
	0x00, 0x40, 0x40, 0x40, 0x40, 0x40,// _
	0x00, 0x00, 0x01, 0x02, 0x04, 0x00,// '
	0x00, 0x20, 0x54, 0x54, 0x54, 0x78,// a
	0x00, 0x7F, 0x48, 0x44, 0x44, 0x38,// b
	0x00, 0x38, 0x44, 0x44, 0x44, 0x20,// c
	0x00, 0x38, 0x44, 0x44, 0x48, 0x7F,// d
	0x00, 0x38, 0x54, 0x54, 0x54, 0x18,// e
	0x00, 0x08, 0x7E, 0x09, 0x01, 0x02,// f
	0x00, 0x18, 0xA4, 0xA4, 0xA4, 0x7C,// g
	0x00, 0x7F, 0x08, 0x04, 0x04, 0x78,// h
	0x00, 0x00, 0x44, 0x7D, 0x40, 0x00,// i
	0x00, 0x40, 0x80, 0x84, 0x7D, 0x00,// j
	0x00, 0x7F, 0x10, 0x28, 0x44, 0x00,// k
	0x00, 0x00, 0x41, 0x7F, 0x40, 0x00,// l
	0x00, 0x7C, 0x04, 0x18, 0x04, 0x78,// m
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x78,// n
	0x00, 0x38, 0x44, 0x44, 0x44, 0x38,// o
	0x00, 0xFC, 0x24, 0x24, 0x24, 0x18,// p
	0x00, 0x18, 0x24, 0x24, 0x18, 0xFC,// q
	0x00, 0x7C, 0x08, 0x04, 0x04, 0x08,// r
	0x00, 0x48, 0x54, 0x54, 0x54, 0x20,// s
	0x00, 0x04, 0x3F, 0x44, 0x40, 0x20,// t
	0x00, 0x3C, 0x40, 0x40, 0x20, 0x7C,// u
	0x00, 0x1C, 0x20, 0x40, 0x20, 0x1C,// v
	0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C,// w
	0x00, 0x44, 0x28, 0x10, 0x28, 0x44,// x
	0x00, 0x1C, 0xA0, 0xA0, 0xA0, 0x7C,// y
	0x00, 0x44, 0x64, 0x54, 0x4C, 0x44,// z
	0x14, 0x14, 0x14, 0x14, 0x14, 0x14,// horiz lines
};


/**
 * ************************************************************************
 * @brief 大小为8*16的字符取模库
 * ************************************************************************
 */
static unsigned char F8X16[][16]=	  
{
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,// 0
  0x00,0x00,0x00,0xF8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x33,0x30,0x00,0x00,0x00,//! 1
  0x00,0x10,0x0C,0x06,0x10,0x0C,0x06,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//" 2
  0x40,0xC0,0x78,0x40,0xC0,0x78,0x40,0x00,0x04,0x3F,0x04,0x04,0x3F,0x04,0x04,0x00,//# 3
  0x00,0x70,0x88,0xFC,0x08,0x30,0x00,0x00,0x00,0x18,0x20,0xFF,0x21,0x1E,0x00,0x00,//$ 4
  0xF0,0x08,0xF0,0x00,0xE0,0x18,0x00,0x00,0x00,0x21,0x1C,0x03,0x1E,0x21,0x1E,0x00,//% 5
  0x00,0xF0,0x08,0x88,0x70,0x00,0x00,0x00,0x1E,0x21,0x23,0x24,0x19,0x27,0x21,0x10,//& 6
  0x10,0x16,0x0E,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//' 7
  0x00,0x00,0x00,0xE0,0x18,0x04,0x02,0x00,0x00,0x00,0x00,0x07,0x18,0x20,0x40,0x00,//( 8
  0x00,0x02,0x04,0x18,0xE0,0x00,0x00,0x00,0x00,0x40,0x20,0x18,0x07,0x00,0x00,0x00,//) 9
  0x40,0x40,0x80,0xF0,0x80,0x40,0x40,0x00,0x02,0x02,0x01,0x0F,0x01,0x02,0x02,0x00,//* 10
  0x00,0x00,0x00,0xF0,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x1F,0x01,0x01,0x01,0x00,//+ 11
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xB0,0x70,0x00,0x00,0x00,0x00,0x00,//, 12
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x01,0x01,0x01,0x01,0x01,//- 13
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,0x00,0x00,//. 14
  0x00,0x00,0x00,0x00,0x80,0x60,0x18,0x04,0x00,0x60,0x18,0x06,0x01,0x00,0x00,0x00,/// 15
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x0F,0x10,0x20,0x20,0x10,0x0F,0x00,//0 16
  0x00,0x10,0x10,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//1 17
  0x00,0x70,0x08,0x08,0x08,0x88,0x70,0x00,0x00,0x30,0x28,0x24,0x22,0x21,0x30,0x00,//2 18
  0x00,0x30,0x08,0x88,0x88,0x48,0x30,0x00,0x00,0x18,0x20,0x20,0x20,0x11,0x0E,0x00,//3 19
  0x00,0x00,0xC0,0x20,0x10,0xF8,0x00,0x00,0x00,0x07,0x04,0x24,0x24,0x3F,0x24,0x00,//4 20
  0x00,0xF8,0x08,0x88,0x88,0x08,0x08,0x00,0x00,0x19,0x21,0x20,0x20,0x11,0x0E,0x00,//5 21
  0x00,0xE0,0x10,0x88,0x88,0x18,0x00,0x00,0x00,0x0F,0x11,0x20,0x20,0x11,0x0E,0x00,//6 22
  0x00,0x38,0x08,0x08,0xC8,0x38,0x08,0x00,0x00,0x00,0x00,0x3F,0x00,0x00,0x00,0x00,//7 23
  0x00,0x70,0x88,0x08,0x08,0x88,0x70,0x00,0x00,0x1C,0x22,0x21,0x21,0x22,0x1C,0x00,//8 24
  0x00,0xE0,0x10,0x08,0x08,0x10,0xE0,0x00,0x00,0x00,0x31,0x22,0x22,0x11,0x0F,0x00,//9 25
  0x00,0x00,0x00,0xC0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x30,0x00,0x00,0x00,//: 26
  0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x60,0x00,0x00,0x00,0x00,//; 27
  0x00,0x00,0x80,0x40,0x20,0x10,0x08,0x00,0x00,0x01,0x02,0x04,0x08,0x10,0x20,0x00,//< 28
  0x40,0x40,0x40,0x40,0x40,0x40,0x40,0x00,0x04,0x04,0x04,0x04,0x04,0x04,0x04,0x00,//= 29
  0x00,0x08,0x10,0x20,0x40,0x80,0x00,0x00,0x00,0x20,0x10,0x08,0x04,0x02,0x01,0x00,//> 30
  0x00,0x70,0x48,0x08,0x08,0x08,0xF0,0x00,0x00,0x00,0x00,0x30,0x36,0x01,0x00,0x00,//? 31
  0xC0,0x30,0xC8,0x28,0xE8,0x10,0xE0,0x00,0x07,0x18,0x27,0x24,0x23,0x14,0x0B,0x00,//@ 32
  0x00,0x00,0xC0,0x38,0xE0,0x00,0x00,0x00,0x20,0x3C,0x23,0x02,0x02,0x27,0x38,0x20,//A 33
  0x08,0xF8,0x88,0x88,0x88,0x70,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x11,0x0E,0x00,//B 34
  0xC0,0x30,0x08,0x08,0x08,0x08,0x38,0x00,0x07,0x18,0x20,0x20,0x20,0x10,0x08,0x00,//C 35
  0x08,0xF8,0x08,0x08,0x08,0x10,0xE0,0x00,0x20,0x3F,0x20,0x20,0x20,0x10,0x0F,0x00,//D 36
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x20,0x23,0x20,0x18,0x00,//E 37
  0x08,0xF8,0x88,0x88,0xE8,0x08,0x10,0x00,0x20,0x3F,0x20,0x00,0x03,0x00,0x00,0x00,//F 38
  0xC0,0x30,0x08,0x08,0x08,0x38,0x00,0x00,0x07,0x18,0x20,0x20,0x22,0x1E,0x02,0x00,//G 39
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x20,0x3F,0x21,0x01,0x01,0x21,0x3F,0x20,//H 40
  0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//I 41
  0x00,0x00,0x08,0x08,0xF8,0x08,0x08,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,0x00,//J 42
  0x08,0xF8,0x88,0xC0,0x28,0x18,0x08,0x00,0x20,0x3F,0x20,0x01,0x26,0x38,0x20,0x00,//K 43
  0x08,0xF8,0x08,0x00,0x00,0x00,0x00,0x00,0x20,0x3F,0x20,0x20,0x20,0x20,0x30,0x00,//L 44
  0x08,0xF8,0xF8,0x00,0xF8,0xF8,0x08,0x00,0x20,0x3F,0x00,0x3F,0x00,0x3F,0x20,0x00,//M 45
  0x08,0xF8,0x30,0xC0,0x00,0x08,0xF8,0x08,0x20,0x3F,0x20,0x00,0x07,0x18,0x3F,0x00,//N 46
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x10,0x20,0x20,0x20,0x10,0x0F,0x00,//O 47
  0x08,0xF8,0x08,0x08,0x08,0x08,0xF0,0x00,0x20,0x3F,0x21,0x01,0x01,0x01,0x00,0x00,//P 48
  0xE0,0x10,0x08,0x08,0x08,0x10,0xE0,0x00,0x0F,0x18,0x24,0x24,0x38,0x50,0x4F,0x00,//Q 49
  0x08,0xF8,0x88,0x88,0x88,0x88,0x70,0x00,0x20,0x3F,0x20,0x00,0x03,0x0C,0x30,0x20,//R 50
  0x00,0x70,0x88,0x08,0x08,0x08,0x38,0x00,0x00,0x38,0x20,0x21,0x21,0x22,0x1C,0x00,//S 51
  0x18,0x08,0x08,0xF8,0x08,0x08,0x18,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//T 52
  0x08,0xF8,0x08,0x00,0x00,0x08,0xF8,0x08,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//U 53
  0x08,0x78,0x88,0x00,0x00,0xC8,0x38,0x08,0x00,0x00,0x07,0x38,0x0E,0x01,0x00,0x00,//V 54
  0xF8,0x08,0x00,0xF8,0x00,0x08,0xF8,0x00,0x03,0x3C,0x07,0x00,0x07,0x3C,0x03,0x00,//W 55
  0x08,0x18,0x68,0x80,0x80,0x68,0x18,0x08,0x20,0x30,0x2C,0x03,0x03,0x2C,0x30,0x20,//X 56
  0x08,0x38,0xC8,0x00,0xC8,0x38,0x08,0x00,0x00,0x00,0x20,0x3F,0x20,0x00,0x00,0x00,//Y 57
  0x10,0x08,0x08,0x08,0xC8,0x38,0x08,0x00,0x20,0x38,0x26,0x21,0x20,0x20,0x18,0x00,//Z 58
  0x00,0x00,0x00,0xFE,0x02,0x02,0x02,0x00,0x00,0x00,0x00,0x7F,0x40,0x40,0x40,0x00,//[ 59
  0x00,0x0C,0x30,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x06,0x38,0xC0,0x00,//\ 60
  0x00,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,0x00,0x40,0x40,0x40,0x7F,0x00,0x00,0x00,//] 61
  0x00,0x00,0x04,0x02,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//^ 62
  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x80,//_ 63
  0x00,0x02,0x02,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//` 64
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x19,0x24,0x22,0x22,0x22,0x3F,0x20,//a 65
  0x08,0xF8,0x00,0x80,0x80,0x00,0x00,0x00,0x00,0x3F,0x11,0x20,0x20,0x11,0x0E,0x00,//b 66
  0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00,0x00,0x0E,0x11,0x20,0x20,0x20,0x11,0x00,//c 67
  0x00,0x00,0x00,0x80,0x80,0x88,0xF8,0x00,0x00,0x0E,0x11,0x20,0x20,0x10,0x3F,0x20,//d 68
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x22,0x22,0x22,0x22,0x13,0x00,//e 69
  0x00,0x80,0x80,0xF0,0x88,0x88,0x88,0x18,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//f 70
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x6B,0x94,0x94,0x94,0x93,0x60,0x00,//g 71
  0x08,0xF8,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//h 72
  0x00,0x80,0x98,0x98,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//i 73
  0x00,0x00,0x00,0x80,0x98,0x98,0x00,0x00,0x00,0xC0,0x80,0x80,0x80,0x7F,0x00,0x00,//j 74
  0x08,0xF8,0x00,0x00,0x80,0x80,0x80,0x00,0x20,0x3F,0x24,0x02,0x2D,0x30,0x20,0x00,//k 75
  0x00,0x08,0x08,0xF8,0x00,0x00,0x00,0x00,0x00,0x20,0x20,0x3F,0x20,0x20,0x00,0x00,//l 76
  0x80,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x20,0x3F,0x20,0x00,0x3F,0x20,0x00,0x3F,//m 77
  0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x3F,0x21,0x00,0x00,0x20,0x3F,0x20,//n 78
  0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x00,0x1F,0x20,0x20,0x20,0x20,0x1F,0x00,//o 79
  0x80,0x80,0x00,0x80,0x80,0x00,0x00,0x00,0x80,0xFF,0xA1,0x20,0x20,0x11,0x0E,0x00,//p 80
  0x00,0x00,0x00,0x80,0x80,0x80,0x80,0x00,0x00,0x0E,0x11,0x20,0x20,0xA0,0xFF,0x80,//q 81
  0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x20,0x20,0x3F,0x21,0x20,0x00,0x01,0x00,//r 82
  0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x33,0x24,0x24,0x24,0x24,0x19,0x00,//s 83
  0x00,0x80,0x80,0xE0,0x80,0x80,0x00,0x00,0x00,0x00,0x00,0x1F,0x20,0x20,0x00,0x00,//t 84
  0x80,0x80,0x00,0x00,0x00,0x80,0x80,0x00,0x00,0x1F,0x20,0x20,0x20,0x10,0x3F,0x20,//u 85
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x00,0x01,0x0E,0x30,0x08,0x06,0x01,0x00,//v 86
  0x80,0x80,0x00,0x80,0x00,0x80,0x80,0x80,0x0F,0x30,0x0C,0x03,0x0C,0x30,0x0F,0x00,//w 87
  0x00,0x80,0x80,0x00,0x80,0x80,0x80,0x00,0x00,0x20,0x31,0x2E,0x0E,0x31,0x20,0x00,//x 88
  0x80,0x80,0x80,0x00,0x00,0x80,0x80,0x80,0x80,0x81,0x8E,0x70,0x18,0x06,0x01,0x00,//y 89
  0x00,0x80,0x80,0x80,0x80,0x80,0x80,0x00,0x00,0x21,0x30,0x2C,0x22,0x21,0x30,0x00,//z 90
  0x00,0x00,0x00,0x00,0x80,0x7C,0x02,0x02,0x00,0x00,0x00,0x00,0x00,0x3F,0x40,0x40,//{ 91
  0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x00,0x00,0x00,//| 92
  0x00,0x02,0x02,0x7C,0x80,0x00,0x00,0x00,0x00,0x40,0x40,0x3F,0x00,0x00,0x00,0x00,//} 93
  0x00,0x06,0x01,0x01,0x02,0x02,0x04,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,//~ 94
};





/**
 * ************************************************************************
 * @brief 汉字字模数据结构
 * index[] 汉字内码索引。使用UTF-8编码格式时为index[3];使用GB2312或GBK编码格式时为index[2];
 * encoder	点阵码数据
 * ************************************************************************
 */
typedef struct {     
    char index[2];                                             
    unsigned char encoder[32];                                             
}GB2312_CN;

/**
 * ************************************************************************
 * @brief GB2312_CN 16*16汉字字模库
 * 取模设置:共阴、列行式、逆向输出
 * 数组格式参照代码所示
 * ************************************************************************
 */
static GB2312_CN F16x16_CN[] = {

	{"嵌",
		0x80,0x80,0xEE,0x88,0x88,0x88,0xE8,0x8F,0x08,0x88,0x78,0x48,0x4E,0x40,0xC0,0x00,
		0x00,0x00,0x7F,0x24,0x24,0x24,0x7F,0x00,0x81,0x40,0x30,0x0F,0x30,0x41,0x80,0x00,
	},

	{"入",
		0x00,0x00,0x00,0x00,0x00,0x01,0xE2,0x1C,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
		0x80,0x40,0x20,0x10,0x0C,0x03,0x00,0x00,0x00,0x03,0x0C,0x30,0x40,0x80,0x80,0x00,
	},

	{"式",
		0x10,0x10,0x90,0x90,0x90,0x90,0x90,0x10,0x10,0xFF,0x10,0x10,0x11,0x16,0x10,0x00,
		0x00,0x20,0x60,0x20,0x3F,0x10,0x10,0x10,0x00,0x03,0x0C,0x10,0x20,0x40,0xF8,0x00,
	},

	{"学",
		0x40,0x30,0x11,0x96,0x90,0x90,0x91,0x96,0x90,0x90,0x98,0x14,0x13,0x50,0x30,0x00,
		0x04,0x04,0x04,0x04,0x04,0x44,0x84,0x7E,0x06,0x05,0x04,0x04,0x04,0x04,0x04,0x00,
	},

	{"习",
		0x00,0x02,0x02,0x02,0x12,0x22,0xC2,0x02,0x02,0x02,0x02,0x02,0xFE,0x00,0x00,0x00,
		0x00,0x08,0x18,0x08,0x04,0x04,0x04,0x02,0x02,0x41,0x81,0x40,0x3F,0x00,0x00,0x00,
	},

};




/**
 * ************************************************************************
 * @brief astronaut_x 太空人52*48系列(共10张)  图像取模 纵向取模,字节倒序
 * ************************************************************************
 */
static unsigned char astronaut_0[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0xC0,
	0xA0,0x60,0x60,0x60,0xA0,0xC0,0x40,0x40,0x80,0x00,0x00,0x00,0x02,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xC0,0x10,0x00,0x00,0x30,0x0C,0x02,0x81,
	0xE0,0xF0,0xF8,0xFC,0xFC,0xFC,0xFC,0xFE,0xFC,0xFC,0xFC,0xF8,0xF8,0xF1,0xE2,0x04,
	0x30,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x11,0x40,0x00,0x0F,
	0x60,0x80,0x00,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0x60,0x0F,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x01,0x02,0x08,0x10,0x42,0x84,0x04,0x09,0x13,0x17,0x17,0x0F,0x1F,0x6F,
	0x1F,0x1F,0x1F,0x0F,0x07,0x07,0x03,0x00,0x00,0x00,0x02,0x44,0x48,0x90,0x62,0x98,
	0x00,0xE4,0x08,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x01,0x00,0x05,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,
	0x00,0x00,0x00,0x01,0x18,0x40,0x04,0x28,0x20,0x98,0xA4,0xA4,0x18,0x40,0x00,0x02,
	0x00,0x0A,0x04,0x03,0x0C,0xC0,0x00,0x40,0x80,0x01,0x04,0x00,0x00,0x00,0x00,0x00,
	0x00,0x04,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x08,0x10,
	0x42,0x00,0x08,0x38,0x48,0x05,0x24,0x1E,0x09,0x00,0x04,0x00,0x10,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,	
};
static unsigned char astronaut_1[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0xC0,0xC0,
	0xE4,0x60,0x20,0x20,0x20,0x00,0x44,0x44,0x80,0x08,0x10,0x20,0x40,0x80,0x00,0x00,
	0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x8C,0xC2,0xE1,
	0xE3,0xF1,0xF0,0xF0,0xF0,0xF0,0xF0,0xF0,0xE0,0xC0,0x80,0x00,0x00,0x01,0x02,0x04,
	0x30,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x80,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x7E,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFC,0x00,0x00,0xB0,0x70,0x4F,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,
	0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x87,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x3F,
	0x9F,0x1F,0x1F,0x0B,0x00,0x04,0x03,0x00,0x00,0x04,0x00,0x08,0x01,0x40,0x22,0x14,
	0x08,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x08,0x10,0x40,
	0x80,0x00,0x00,0x00,0x01,0x09,0x26,0xB0,0x20,0xC0,0xA0,0x80,0x00,0x41,0x08,0x05,
	0x00,0x08,0x05,0x03,0x08,0x80,0x00,0x00,0x00,0x01,0x04,0x08,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x01,
	0x00,0x80,0x08,0x08,0x29,0x26,0x0E,0x00,0x09,0x00,0x05,0x00,0x00,0x02,0x84,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_2[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x00,
	0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x44,0x80,0x08,0x10,0x20,0x40,0x00,0x00,0x00,
	0x00,0x00,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xB0,0x9C,0xCE,0xC7,
	0xC1,0xC1,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x04,
	0x30,0x81,0x02,0x04,0x10,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x04,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,
	0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFC,0xF0,0x00,0x00,
	0x00,0x00,0x00,0x80,0xEC,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x80,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x07,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	0x7F,0x93,0x10,0x08,0x04,0x04,0x03,0x00,0x00,0x10,0x21,0x40,0x82,0x44,0x28,0x10,
	0xA0,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x07,0x1C,0x70,0xA0,0xE0,0x80,0x02,0x92,0x12,0x00,0x00,
	0x10,0x09,0x06,0x03,0x08,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x01,
	0x04,0x00,0x08,0x08,0x2F,0x22,0x1E,0x00,0x09,0x00,0x05,0x00,0x00,0x00,0x00,0x10,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_3[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,
	0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x7C,0x8E,0x81,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0xC4,
	0x30,0xC0,0x02,0x04,0x10,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x60,0x20,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x80,0x00,0x0F,
	0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,0xF8,0xE0,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x80,0xE2,0x2F,0x20,0x20,0x40,0x00,0x00,0x01,0x04,0x10,0x20,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x02,0x08,0x10,0x00,0x03,0x07,0x07,0x0F,0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	0x10,0xF0,0x10,0x08,0x04,0x04,0x03,0x20,0x42,0x06,0x0C,0x38,0xE0,0xC1,0x02,0x04,
	0x90,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x10,0x20,0x18,0xA4,0xA4,0x18,0x01,0x06,0x08,
	0x10,0x01,0x0D,0x07,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x80,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x02,0x00,0x04,0x18,0x24,0x22,0x11,0x01,0x08,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x80,0x00,0x06,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_4[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x80,0x40,0x44,
	0x24,0x24,0x20,0x22,0x20,0x20,0x44,0x44,0x80,0x08,0x10,0x20,0x40,0x00,0x00,0x00,
	0x00,0x00,0x00,0x84,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0xEC,0x02,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x1B,0x04,
	0x18,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,
	0x7C,0xFC,0xF8,0xF8,0xF0,0xE0,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x80,0xE0,0x1F,0x00,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x07,0x07,0x0F,0x0F,0x1F,0x10,0x10,0x10,0x10,
	0x10,0xF0,0x90,0x08,0x38,0x74,0xC2,0x81,0x00,0x00,0x00,0x00,0x01,0x04,0x08,0x10,
	0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x40,0x00,0x00,0x00,0x02,0x02,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x08,0x20,0x18,0x00,0x00,0x00,0x02,0x04,0x10,0x60,0x80,
	0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x16,0x38,0x70,0xF0,0x83,0x8F,0x94,0x28,0x08,
	0x08,0x14,0xC6,0x19,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x30,
	0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x02,0x04,0x04,0x28,0x04,0x23,0x03,0x11,0x0E,0x45,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_5[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0x40,0x40,
	0x20,0x20,0x20,0x20,0x20,0x60,0x44,0xC4,0x84,0x08,0x10,0x20,0x4C,0x80,0x00,0x00,
	0x00,0x08,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x30,0x1C,0x1E,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x01,0x02,0x05,0x0A,0x0C,
	0x30,0xC1,0x02,0x0C,0x10,0x60,0x00,0x00,0x00,0x00,0x00,0x07,0x80,0x05,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0F,
	0x70,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x80,0xF0,0x4F,0x40,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x0C,0x08,0x10,0x10,0x10,0x00,0x30,0xA0,
	0x30,0xD0,0x08,0x04,0x02,0x02,0x01,0x00,0x00,0x03,0x06,0x1C,0x38,0xE1,0xE2,0x9C,
	0x08,0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,
	0x00,0x00,0x00,0x03,0x18,0x60,0x07,0x3E,0x28,0xB0,0xC0,0x80,0xA0,0x10,0x08,0x00,
	0x04,0x8A,0x04,0x03,0x0C,0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x20,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x18,0x24,
	0x28,0x00,0x00,0x00,0x03,0x04,0x18,0x60,0x80,0x00,0x01,0x00,0x01,0x01,0x00,0x01,
	0x02,0x04,0x08,0x38,0x48,0x47,0x26,0x1E,0x09,0x09,0x04,0x02,0x00,0x00,0x02,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_6[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,
	0x20,0x20,0x60,0xA0,0x20,0x60,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x20,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x70,0x0C,0x02,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x05,0x3F,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF8,0xC0,0x00,0x00,0x10,0x20,0x80,0x40,0x40,0x00,0x00,0x00,0x00,0xC0,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x30,0xC0,0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x01,0x03,0x07,0x87,0x6F,0x0F,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x10,0x20,0x80,
	0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x04,0x05,0x08,0x08,0x10,0x10,0x10,0x90,0x60,
	0x30,0x10,0x10,0x18,0x48,0x14,0x42,0x01,0x09,0x20,0x42,0x84,0x48,0x30,0x40,0x00,
	0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x02,0x08,0x10,0x40,0x00,0x00,0x01,0x84,0x89,0x64,0x0C,0x92,0x21,
	0x02,0x0C,0x01,0x0A,0xC0,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x00,
	0x01,0x02,0x04,0x39,0x4A,0x3C,0x22,0x12,0x01,0x08,0x07,0x00,0x00,0x00,0x00,0x00,
	0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_7[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0xC0,
	0xE0,0x60,0x60,0x20,0xA0,0xC0,0xC0,0xC0,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0C,0x02,0x01,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF0,0x80,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x80,0x00,0x0F,
	0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x0F,0x0F,0x1F,
	0x1F,0x3F,0x3F,0xBF,0x7F,0x0F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x20,0x80,
	0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x40,0x00,
	0x00,0x00,0x02,0x08,0x10,0x00,0x03,0x04,0x00,0x0E,0x14,0x18,0x10,0x90,0x60,0x20,
	0x30,0x90,0xD0,0x08,0x04,0x04,0x82,0x01,0x01,0x00,0x82,0x44,0x08,0x10,0xC0,0x00,
	0x00,0x00,0x00,0x00,0x01,0x04,0x0B,0x20,0x40,0x00,0x00,0x00,0x02,0x00,0x00,0x00,
	0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x02,0x04,0x10,0x40,0x81,0x07,0x1C,0xB0,0xF0,0x01,0x8C,0x08,0x63,0x00,
	0x00,0x01,0x00,0x18,0x00,0x00,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x01,0x02,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x01,
	0x02,0x00,0x04,0x00,0x18,0x24,0x20,0x12,0x01,0x09,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	
};
static unsigned char astronaut_8[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0xC0,0xC0,0xC0,
	0x24,0x20,0x20,0x20,0xA0,0xC0,0xC4,0xC4,0x80,0x08,0x10,0x20,0x40,0x80,0x00,0x06,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x0C,0x02,0x07,
	0x03,0x01,0x00,0xE0,0xFC,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF0,0x80,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x60,0x80,0x00,0x00,0x00,0x00,0x00,0x03,0x1F,0x3F,0x7F,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0xFF,0x8F,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x82,0x04,0x04,0x08,0x00,0x10,0x18,0x18,0x10,0x20,
	0x10,0x10,0x11,0x09,0x05,0x04,0x03,0x00,0x00,0x00,0x03,0x04,0x0A,0xA4,0xE8,0x10,
	0xC0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x0C,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,
	0x00,0x00,0x00,0x00,0x04,0x20,0x40,0x23,0x18,0x20,0x80,0x80,0x0A,0x41,0x09,0x00,
	0x00,0x08,0x84,0x03,0x08,0xA0,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,
	0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x81,
	0x04,0x00,0x08,0x30,0x48,0x04,0x23,0x17,0x09,0x04,0x03,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,
	
};
static unsigned char astronaut_9[]=
{
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x40,0x40,0x40,
	0x20,0x20,0x20,0x20,0x20,0x00,0x40,0x40,0x80,0x00,0x00,0x00,0x00,0x88,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x7C,0x0E,0x07,
	0x02,0xC0,0xF0,0xF8,0xFC,0xFE,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFE,0xFC,
	0xF0,0x80,0x02,0x04,0x10,0x20,0x80,0x00,0x06,0x02,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,
	0x60,0x80,0x00,0x00,0x00,0x0F,0x3F,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,0xFF,
	0xFF,0xFF,0xFF,0xFF,0x7F,0x8F,0x00,0x00,0x00,0x00,0x00,0x01,0x04,0x00,0x00,0x08,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x04,0x04,0x08,0x00,0x10,0x11,0x11,0x23,0x23,
	0x13,0x13,0x93,0x0B,0x07,0x07,0x03,0x00,0x00,0x00,0x02,0x45,0x0A,0x64,0xC8,0x10,
	0xE0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x02,0x10,0x40,0x01,0x24,0x10,0x40,0x14,0xA0,0x04,0x00,0x00,0x01,
	0x02,0x88,0x04,0x07,0xB0,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x02,0x04,0x10,0x20,0x80,0x00,0x01,0x02,0x02,0x01,0x01,0x02,
	0x04,0x00,0x08,0x30,0x48,0x45,0x26,0x1A,0x01,0x08,0x03,0x00,0x00,0x00,0x00,0x00,
	0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
};



#endif

3 功能验证

首先在main.c中引入头文件

/* USER CODE BEGIN Includes */
#include "OLED_IIC_Config.h"
#include "OLED_Function.h"
#include "OLED_Front.h"
/* USER CODE END Includes */

随即根据要求在main函数中添加对应功能函数即可

3.1 显示英文字符

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowStr(0,0,"OLED-TEXT",1);
  OLED_ShowStr(0,16,"OLED-TEXT",2);
}

3.2 显示中文汉字

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowChinese(0,16,"嵌");
  OLED_ShowChinese(16,16,"入");
  OLED_ShowChinese(32,16,"式");
}

注意】使用时应将编译器编码选项选择为GBK系列,否则编译报错,尤其注意通过keil修改后,再用vscode打开看见有乱码时,一定检查一下编译器的编码格式是否为GBK系列

3.3 显示内容垂直偏移指定距离

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowStr(0,40,"OLED-TEXT",1);
  OLED_ShowChinese(0,48,"嵌");
  OLED_ShowChinese(16,48,"入");
  OLED_ShowChinese(32,48,"式");
  OLED_Shift(20);
}

3.4 显示内容水平循环滚动

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化
  OLED_ShowStr(0,0,"OLED-TEXT",1);
  OLED_ShowChinese(0,16,"嵌");
  OLED_ShowChinese(16,16,"入");
  OLED_ShowChinese(32,16,"式");
  OLED_HorizontalShift(0,3,RIGHT);
}

3.3 显示BMP图片

int main(void)
{
  HAL_Init();
  SystemClock_Config();
  MX_GPIO_Init();
  MX_I2C1_Init();

  OLED_Init();  //OLED初始化

  while (1)
  {
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_0);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_1);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_2);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_3);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_4);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_5);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_6);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_7);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_8);
    OLED_ShowBMP(0,0,52,48,(unsigned char *)astronaut_9);
  }
}

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.coloradmin.cn/o/2106761.html

如若内容造成侵权/违法违规/事实不符,请联系多彩编程网进行投诉反馈,一经查实,立即删除!

相关文章

ICM20948 DMP代码详解(1)

序言 接触Invensense的芯片这已经是第三次了。2015年在第二空间的时候第一次接触它的芯片&#xff0c;那时候是MPU9250&#xff1b;2021年的时候在智橙动力再一次接触到了MPU6050&#xff0c;那个时候用到了其中的DMP&#xff1b;这次接触的是ICM20948&#xff0c;按目前笔者理…

吃多一时爽,吃少活更长!

美国索尔克生物研究所Belmonte研究团队和中科院研究团队在Cell上发表题为Caloric Restriction Reprograms the Single-Cell Transcriptional Landscape of Rattus Norvegicus Aging的研究内容&#xff0c;比较了摄入热量少30%的老鼠和正常饮食的老鼠之间的区别&#xff0c;发现…

黑马点评7——达人探店

文章目录 发布探店笔记查看探店笔记点赞功能点赞排行榜功能 发布探店笔记 这个其实比较简单&#xff0c;就是把笔记保存到数据库tb_blog中去 PostMappingpublic Result saveBlog(RequestBody Blog blog) {// 获取登录用户UserDTO user UserHolder.getUser();blog.setUserId(u…

python OpenCV的羽化融合图像

1. 读入两幅图像,苹果和橘子 2. 构建苹果和橘子的高斯金字塔&#xff08;6 层&#xff09; 3. 根据高斯金字塔计算拉普拉斯金字塔 4. 在拉普拉斯的每一层进行图像融合&#xff08;苹果的左边与橘子的右边融合&#xff09; 5. 根据融合后的图像金字塔重建原始图像。 impor…

YOLOv5改进 | 模块缝合 | C3 融合REPVGGOREPA提升检测性能【详细步骤 完整代码】

秋招面试专栏推荐 &#xff1a;深度学习算法工程师面试问题总结【百面算法工程师】——点击即可跳转 &#x1f4a1;&#x1f4a1;&#x1f4a1;本专栏所有程序均经过测试&#xff0c;可成功执行&#x1f4a1;&#x1f4a1;&#x1f4a1; 专栏目录 &#xff1a;《YOLOv5入门 改…

数字与文字组合商标,有一个元素近似整体驳回!

经常遇到有网友问驳回复审要不要做复审&#xff0c;其实判断分析好&#xff0c;大多数商标驳回后不值得做复审&#xff0c;也可以省掉不必要的费用&#xff0c;最近有个网友联系到普推知产商标老杨&#xff0c;咨询一个驳回复审的问题。 这个网友的商标是数字和文字组合&#…

若依系统的学习

若依环境 介绍 ‌若依是一款快速开发平台(低代码)&#xff0c;用于快速构建企业级后台管理系统&#xff0c;它提供了许多常用的功能模块和组件&#xff0c;包括权限管理、代码生成、工作流、消息中心等 官方地址: https://www.ruoyi.vip/ ‌基于Spring Boot和Spring Cloud‌…

【分享】Excel表格设置“打开密码”的两种方法

在工作中&#xff0c;Excel文件通常包含敏感数据&#xff0c;出于安全性考虑&#xff0c;给文件设置打开密码是非常有效的方式。接下来&#xff0c;小编给大家介绍两种方法&#xff0c;帮助你轻松为Excel文件设置密码。 方法一&#xff1a;在Excel表里设置“打开密码” 这是Ex…

2024AEI:Cross-Supervised multisource prototypical network

目录 研究动机 研究数据集 研究方法 研究动机 该论文是为了解决以轴承故障诊断为背景的多源域小样本域自适应问题而提出的。文中有提及到实际的工业生产中&#xff0c;存在多源域缺少足够的样本标签数据支撑一般的多源域域自适应&#xff08;MSDA&#xff09;方法的情况&…

借助el-steps和el-form实现超长规则配置的功能

目录 一、应用场景 二、开发流程 三、详细开发流程 四、总结 一、应用场景 最近开发了一个规则类的配置功能&#xff0c;这个功能之前就写过&#xff0c;最近完善了一下&#xff0c;所以将原先的规则变得更多元化&#xff0c;结构也更多了一层&#xff0c;添加新功能的时候…

Java箱与泛型

大O的渐进表示法 大 O 的渐进表示法 去掉了那些对结果影响不大的项 &#xff0c;简洁明了的表示出了执行次数。 void func1(int N){ int count 0; for (int i 0; i < N ; i) { for (int j 0; j < N ; j) { count; } } for (int k 0; k < 2 * N ; k) { count; } in…

深度学习示例2-多输入多输出的神经网络模型

一、代码示例 from tensorflow import keras from tensorflow.keras import layers import numpy as np# 定义 多输入 多输出的模型 vocabulary_size = 1000 num_tags = 100 num_departments = 4title = keras.Input(shape=(vocabulary_size,), name = "title") tex…

【虚拟化】KVM常用命令操作(virsh磁盘管理)

目录 一、KVM概述 1.1 KVM工具栈 1.2 libvirt架构概述 1.3 KVM磁盘格式介绍 1.4 KVM磁盘操作常见语法 1.5 qemu-img命令简介 1.6 libguestfs安装 二、虚拟机磁盘管理 2.1 查看虚拟机磁盘 2.2 创建虚拟机磁盘 2.3 扩容磁盘容量 2.4 查看虚拟机存储状态 2.5 快照 2…

基于BiLSTM-CRF的医学命名实体识别研究(下)模型构建

一.生成映射字典 接下来需要将每个汉字、边界、拼音、偏旁部首等映射成向量。所以&#xff0c;我们首先需要来构造字典&#xff0c;统计多少个不同的字、边界、拼音、偏旁部首等&#xff0c;然后再构建模型将不同的汉字、拼音等映射成不同的向量。 在prepare_data.py中自定义…

实现自定义的移动端双指缩放

原理&#xff1a; DOM上绑定双指触控相关的事件&#xff0c;当双指触控时&#xff0c;保存初始距离&#xff0c;当双指移动时&#xff0c;计算两触控点的距离&#xff0c;根据移动中的距离与初始距离调节缩放比例&#xff0c;再根据缩放比例改变元素样式即可实现缩放 效果演示…

Java,版本控制:算法详解与实现

Spring Boot微服务架构技术及其版本号比较优化 随着云技术和分布式系统的快速发展&#xff0c;微服务架构已经成为现代软件开发不可或缺的一部分。 Spring Boot&#xff0c;作为一款广受欢迎的Java开发框架&#xff0c;其简洁的配置和快速启动的特性深受开发者青睐。 配合Sp…

旅游线路规划和路线下载

新疆旅游&#xff0c;规划一个北疆旅游线路安排如下&#xff1a; 第一天&#xff1a;从乌鲁木齐到魔鬼城&#xff0c;晚上住宿克拉玛依市乌尔禾区&#xff1b; 第二天&#xff1a;从克拉玛依市乌尔木区到五彩滩&#xff0c;晚上住宿贾登峪&#xff1b; 第三天&#xff1a;从…

win10本地设置无密码远程桌面登录设置

win10本地设置无密码远程桌面登录

软考超详细准备之软件设计师的计算机系统题型二(上午题)

目录 流水线 存储器: cache Cache命中率的相关图形 中断 相关习题 输入和输出 相关习题 总线 相关习题 加密技术与认证技术 相关习题 加密技术 相关习题 杂题 流水线 流水线&#xff08;Pipeline&#xff09;是一种在硬件设计中用于提高效率和吞吐量的技术&…

SOMEIP_ETS_088: SD_Answer_multiple_subscribes_together

测试目的&#xff1a; 验证设备&#xff08;DUT&#xff09;是否能够接受它接收到的每个SubscribeEventgroup条目。 描述 本测试用例旨在检查DUT在接收到包含多个SubscribeEventgroup条目的消息时&#xff0c;是否能够为每个条目发送SubscribeEventgroupAck。 测试拓扑&…