一、驱动方式：软件SPI，屏幕像素320*240
二、标准库含触摸，HAL库不含触摸
三、立创参考的文档
【立创·天空星ST32F407VET6】模块移植手册 - 飞书云文档 (feishu.cn)
https://lceda001.feishu.cn/wiki/MFNpw4STVi5ImikkcH1clWrlnqb
四、引脚分配
软件SDO（MISO）不用接，注意SDI和SDO的S是slave而不是master，不要接反线,ili9341屏幕是slave，天空星开发板是master，所以SDI接的是MOSI。
五、HAL库工程（没有移植触摸）
1.选择外部时钟源
2.选择SW
3.配置时钟框图，HSE选择8MHz，天空星时钟为8MHz
4.配置引脚，上述所有的引脚按这样配置：上拉，高速，初始高电平，推挽输出
5.选择只生成必要文件
6.添加以下文件
F407VET6天空星/ILI9341HAL库移植所需要的文件 · lovefoolnotme/单片机 - 码云 - 开源中国 (gitee.com)https://gitee.com/lovefoolnotme/singlechip/tree/master/F407VET6%E5%A4%A9%E7%A9%BA%E6%98%9F/ILI9341HAL%E5%BA%93%E7%A7%BB%E6%A4%8D%E6%89%80%E9%9C%80%E8%A6%81%E7%9A%84%E6%96%87%E4%BB%B6移植这些文件只需要修改对应的引脚即可使用，touch不需要移植（没有完成移植修改）
7.测试移植
/* USER CODE BEGIN Header */
/**
******************************************************************************
* @file : main.c
* @brief : Main program body
******************************************************************************
* @attention
*
* Copyright (c) 2024 STMicroelectronics.
* All rights reserved.
*
* This software is licensed under terms that can be found in the LICENSE file
* in the root directory of this software component.
* If no LICENSE file comes with this software, it is provided AS-IS.
*
******************************************************************************
*/
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "gpio.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
#include "lcd.h"
#include "gui.h"
#include "test.h"
/* USER CODE END Includes */
/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */
/* USER CODE END PTD */
/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */
/* USER CODE END PD */
/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
/* USER CODE BEGIN PV */
/* USER CODE END PV */
/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
* @brief The application entry point.
* @retval int
*/
int main(void)
{
/* USER CODE BEGIN 1 */
/* USER CODE END 1 */
/* MCU Configuration--------------------------------------------------------*/
/* Reset of all peripherals, Initializes the Flash interface and the Systick. */
HAL_Init();
/* USER CODE BEGIN Init */
/* USER CODE END Init */
/* Configure the system clock */
SystemClock_Config();
/* USER CODE BEGIN SysInit */
/* USER CODE END SysInit */
/* Initialize all configured peripherals */
MX_GPIO_Init();
/* USER CODE BEGIN 2 */
LCD_Init(); //液晶屏初始化
/* USER CODE END 2 */
/* Infinite loop */
/* USER CODE BEGIN WHILE */
while (1)
{
main_test(); //测试主界面
Test_Color(); //简单刷屏填充测试
Test_FillRec(); //GUI矩形绘图测试
Test_Circle(); //GUI画圆测试
Test_Triangle(); //GUI三角形绘图测试
English_Font_test();//英文字体示例测试
Chinese_Font_test();//中文字体示例测试
Pic_test(); //图片显示示例测试
Rotate_Test(); //旋转显示测试
/* USER CODE END WHILE */
/* USER CODE BEGIN 3 */
}
/* USER CODE END 3 */
}
/**
* @brief System Clock Configuration
* @retval None
*/
void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
/** Configure the main internal regulator output voltage
*/
__HAL_RCC_PWR_CLK_ENABLE();
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
/** Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 4;
RCC_OscInitStruct.PLL.PLLN = 72;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLQ = 4;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
{
Error_Handler();
}
/** Initializes the CPU, AHB and APB buses clocks
*/
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
{
Error_Handler();
}
}
/* USER CODE BEGIN 4 */
/* USER CODE END 4 */
/**
* @brief This function is executed in case of error occurrence.
* @retval None
*/
void Error_Handler(void)
{
/* USER CODE BEGIN Error_Handler_Debug */
/* User can add his own implementation to report the HAL error return state */
__disable_irq();
while (1)
{
}
/* USER CODE END Error_Handler_Debug */
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t *file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */
8.实际效果
六、标准库工程（立创给的，含触摸测试，可以直接下载使用）
单片机: 部分单片机的程序例程 - Gitee.comhttps://gitee.com/lovefoolnotme/singlechip/tree/master/F407VET6%E5%A4%A9%E7%A9%BA%E6%98%9F在立创中的文档也有下载链接，需要自己去找，我这里也给出了链接，更方便，防止以后失效。
这个立创与上述CUBEMX的立创的区别就是有触摸测试。
