django-q ,celery，apschedule都可以作为python的选型，但是django-q更轻量级，可以定制想要的任务，通过消息中间件，来实现不太高并发的实现
官网介绍地址
django-q官网地址
本次测试的是python3.12版本
首先需要安装django-q,具体安装方式pip install django-q
国内的话可以选择清华或者豆瓣源进行安装
最后在settings.py文件中INSTALLED_APPS添加
INSTALLED_APPS = [
#放在最后面添加即可
'django_q',
]
然后配置队列消息中间件
相关消息中间件配置可以参照官网
中间件选型
为了测试方便选择了orm配置
settings.py添加如下内容
Q_CLUSTER = {
'name': 'DjangORM',
'workers': 1,
'timeout': 90,
'retry': 120,
'queue_limit': 50,
'bulk': 10,
'orm': 'default'
}
为了方便views.py视图，自己创建了一个app01项目
核心代码如下
from django.shortcuts import render,HttpResponse
from django.http import JsonResponse,request
# Create your views here.
import math
def demo_task(number):
print(number,type(number))
return math.sqrt(number)
from django_q.tasks import async_task, Task
def task_finish(task: Task):
print(f'任务 {task.name}（ID：{task.id}）完成！')
# hook参数是执行完成回调函数，可以通过admin后台查看结果
def create_task(request):
task_id=async_task(
demo_task, 10,
task_name='测试任务1',
hook=task_finish,
)
return JsonResponse({'task_id':task_id,'result':'成功'})
from django_q.tasks import schedule,Schedule
def create_cron1(request):
schedule(
'app01.views.demo_task',1000,
schedule_type=Schedule.MINUTES,
minutes=1,
task_name='定时任务1',
)
return JsonResponse({'result':'定时任务1创建'})
配置相关的urls.py路由前端能识别到
执行每个命令分别新开一个窗口执行，前三步必须顺序执行，后两步骤可部分先后顺序执行
python manage.py makemigrations
python manage.py migrate
python manage.py runserver
python manage.py createsuperuser
python manang.py qcluster
打开浏览器执行
可以看到定时任务已经创建
为什么是两个定时任务因为有一个是我之前创建
可以看到里面的参数，我们可以定制修改
定时任务执行结果
Django-Q的定时任务类型：
一次性
按x分钟执行一次
每小时一次
每天
每周
每月
每季度
每年
Cron表达式
注意，即使是Cron表达式，定时任务执行的最短间隔也是1分钟缘由
The current design has a heartbeat of 30 seconds, which means the schedule table can't have schedules below that. Most of this is explained in the architecture docs. Because of the way the internal loop is set up, a resolution under a dozen seconds or so, quickly becomes unreliable.
I always imagined tasks that need accuracy measured in seconds, would use a delayed tasks strategy where a few seconds delay is either added through the broker or inside the task itself.
The problem with all this, is that a task is currently always added to the back of the queue. So even with a 1 second resolution on the schedule, the task still has to wait it's execution time. Which can of course vary wildly depending on the broker type, worker capacity and current workload.
当然如果触发了定时任务也可以触发信号
signal官网文档
具体完整版本可以参考附件下载
