目录

Draw Test Harness：

C++：

---

环形弹簧，也称为弓簧，是由拉伸弹簧和连接弹簧构成的。在结构上，环形弹簧通常包括端环、外环和内环，其主要参数包括弹簧的内径、外径和自由高度。环形弹簧的一个显著特点是，当承受轴向压缩载荷时，各圆环会沿圆锥面相对滑动，导致整个弹簧产生轴向变形。

环形弹簧的一个主要特性是，与其他各种弹簧相比，它几乎只产生纯压缩和拉伸应力，因此其单位体积材料的变形能要较其他弹簧大得多。这使得环形弹簧特别适用于空间尺寸受限制，但需要吸收大量能量和强力缓冲的场合，例如铁道车辆的链接部分、受强大冲击的缓冲装置、大型管道的吊架和大容量电流遮断器的固定支承等。

在环形弹簧的制造过程中，会先使用专用胎夹具夹紧拉伸弹簧的一端并旋入连接弹簧，然后将拉伸弹簧的另一端旋转后套入连接弹簧的另一端，最后利用回转力将连接弹簧旋接在拉伸弹簧的内部，从而构成环形弹簧。

Draw Test Harness：

pload MODELING VISUALIZATION​# use torus surface.torus aTorus 10 2​set aSlope 0.05line aLine2d 0 0 $aSlope 1trim aSegment aLine2d 0 2*pi​# make edge by the pcurve.mkedge aHelixEdge aSegment aTorus 0 2*pi/$aSlope​# there is no curve 3d in the pcurve edge.# so need this to approximate one.mkedgecurve aHelixEdge 0.01​wire aHelixWire aHelixEdge​# make the profile.circle aProfile 12 0 0 1 1 1 0.3mkedge aProfile aProfilewire aProfile aProfilemkplane aProfile aProfile​# display the profile.vdisplay aProfile aHelixEdge​# loft the circle along the helix curve.pipe aSpring aHelixWire aProfile​# display the result.vdisplay aSpring#vsetmaterial aSpring steelvsetgradientbg 180 200 255 180 180 180 2vsetdispmode 1vzbufftrihedron​set ray tracingif { ! [catch {vrenderparams -raytrace -shadows -reflections -fsaa -rayDepth 5}] } {  vtextureenv on 1}

C++：

#include <Geom_ToroidalSurface.hxx>
#include <gp_Lin2d.hxx>
#include <Geom2d_TrimmedCurve.hxx>
#include <GCE2d_MakeSegment.hxx>
#include <BRepBuilderAPI_MakeEdge.hxx>
#include <BRepLib.hxx>
#include <BRepBuilderAPI_MakeWire.hxx>
#include <Geom_Circle.hxx>
#include <BRepBuilderAPI_MakeFace.hxx>
#include <BRepOffsetAPI_MakePipe.hxx>
#include <TopoDS.hxx>
​
#include"Viewer.h"
​
int main(int argc, char* argv[])
{
    gp_Ax3 loc = gp_Ax3(gp_Pnt(0, 0, 0), gp_Dir(0, 0, 1), gp_Dir(1, 0, 0));
    Handle(Geom_ToroidalSurface) aTorus =new Geom_ToroidalSurface(loc, 10, 2);
    gp_Lin2d aLine2d(gp_Pnt2d(0.0, 0.0), gp_Dir2d(0.05, 1.0));
    Handle(Geom2d_TrimmedCurve) aSegment = GCE2d_MakeSegment(aLine2d, 0.0, M_PI * 2.0);
    TopoDS_Edge aHelixEdge = BRepBuilderAPI_MakeEdge(aSegment, aTorus, 0.0, 2.0 * M_PI/0.05);
    BRepLib::BuildCurves3d(aHelixEdge,0.01);
    BRepBuilderAPI_MakeWire aHelixWire;
    aHelixWire.Add(aHelixEdge);
    Handle(Geom_Circle) aProfile = new Geom_Circle(gp_Ax2(gp_Pnt(12, 0, 0), gp_Dir(1, 1, 1)), 0.3);
    TopoDS_Edge aProfilee = BRepBuilderAPI_MakeEdge(aProfile);
    BRepBuilderAPI_MakeWire aProfilew;
    aProfilew.Add(aProfilee);
    TopoDS_Shape aProfilef = BRepBuilderAPI_MakeFace(aProfilew);
    BRepOffsetAPI_MakePipe aSpring(TopoDS::Wire(aHelixWire), aProfilef, GeomFill_IsCorrectedFrenet, Standard_False);
    TopoDS_Shape Spring = aSpring.Shape();
    Viewer vout(50, 50, 500, 500);
    vout << aHelixWire;
    vout << aProfilef;
    vout << Spring;
    vout.StartMessageLoop();
    return 0;
​
}
​