浅谈安科瑞ASJ继电器在马尔代夫环岛水上排屋的应用

news2024/9/26 5:19:54

摘要:对电气线路进行接地故障保护,方式接地故障电流引起的设备和电气火灾事故越来越成为日常所需。针对用户侧主要的用能节点,设计安装剩余电流继电器,实时监控各用能回路的剩余电流状态。通过实时监控用能以及相关电力参数、提高用能安全、可靠及维护效率、降低维护的人工成本、实现了对剩余电流监控的无人值守。通过用能的实时监测,数据的采集及报警,监测配电系统中剩余电流,为用户电气线路接地故障保护,防范剩余电流导致的火灾事故和人员触电事故提供保障。现就我司ASJ型剩余电流继电器在马尔代夫环岛水上排屋项目的应用做一简要介绍。

Abstract: Ground fault protection for electrical circuits, equipment and electrical fire accidents caused by ground fault currents are increasingly becoming a daily necessity. For the main energy-consuming nodes on the user side, a residual current relay is designed and installed to monitor the residual current status of each energy-using circuit in real time. Through real-time monitoring of energy use and related power parameters, the safety, reliability and maintenance efficiency of energy use are improved, the labor cost of maintenance is reduced, and the unattended monitoring of residual current is realized. Through the real-time monitoring of energy use, data collection and alarm, the residual current in the power distribution system is monitored, and the ground fault protection of the user's electrical circuit is provided to prevent fire accidents and personal electric shock accidents caused by residual current. Here is a brief introduction to the application of our company's ASJ residual current relay in the water terrace house project around the island Maldives.

1.项目概述  Project Overview

马尔代夫环岛水上排屋主要用于接待世界各地游客,应用现场频率为50 Hz,电压为220V的TT或者TN系统配电线路。客户希望通过在水上排屋配电柜内安装剩余电流继电器来监测线路剩余电流,并且希望可以在显示面板上显示实时监测的剩余电流值与其设定的剩余电流值之比值,在此比值达到80%时剩余电流继电器能立即报警。安科瑞ASJ10-LD1A配合剩余电流互感器,成功地解决了客户现场剩余电流监控需求。

The water townhouses around the island in the Maldives are mainly used to receive tourists from all over the world. The application site frequency is 50 Hz and the voltage is 220V TT or TN system power distribution lines. The customer hopes to monitor the residual current of the line by installing a residual current relay in the distribution cabinet of the water row house, and hopes that the ratio of the real-time monitored residual current value to the set residual current value can be displayed on the display panel, when the ratio reaches 80%, the residual current relay can alarm immediately. Acrel ASJ10-LD1A cooperates with the residual current transformer, Successfully solved the customer's on-site residual current monitoring needs.

1.ASJ系列剩余电流继电器介绍  

ASJ Series Residual Current Relay

ASJ 系列剩余电流动作继电器可与低压断路器或低压接触器等组成组合式剩余电流保护装置,主要适用于交流 50Hz,额定电压 400V 及以下的 TT 和 TN 系统配电线路,用来对电气线路进行接地故障保护,防止接地故障电流引起的设备损坏和电气火灾事故,也可用来对人身触电危险提供间接接触保护。

产品符合 GB/T 22387-2016《剩余电流动作继电器》的要求。

ASJ系列剩余电流继电器集线路过电压、欠电压保护功能和线路正常电压自动延时复位功能。该产品主要应用于住宅分户箱进线或单相或三相用电设备配电线路的保护,产品体积小、精度高、结构紧凑,安装方便,是民用建筑领域中的安全保护装置。

ASJ series current action relays can be combined with low-voltage power supplies or low-voltage contactor to form a combined power supply current protection, mainly used for AC 50Hz, voltage and below TT400V devices and TN system piping, in addition to ground fault protection for electrical circuits to prevent ground faults Common equipment damages and electrical failures caused by this can also prevent the danger of personal electric shock and provide direct contact protection.

The product meets the requirements of GB/T 22387-2016 "Catalyst Current Relay".

   ASJ series sanitary current relays integrate line over-voltage and under-voltage protection functions and automatic additional functions for normal voltage. The product is small in size, high in precision, flexible in structure and easy to install. It is a safety protection device in the field of civil construction.

2.型号说明  Model description

Technical features

Note 3:ASJ10L-LD1A rated residual action current I N is 10mA-30A continuously adjustable;

Note 4:ASJ10L-LD1A limit non-driving Time N is 0-10S continuously adjustable.

Types of Products

Note1:The function of setting for relay means that you can set the initialization and the output of the relay by yourself, which is acted by the dial switch on the panel; the specific setting guide can be found from the table 5.

Note2:OPTIONAL FUNCTION C: RTU Communication RS485, Model ASJ10L-LD1A/C

3.剩余电流互感器选型 Model Selection of Residual Current Relay

 

4.安装图片 Installation picture

5. 总结  Summary

ASJ系列剩余电流继电器具有较高的性能价格比,作为一种先进的智能化、数字化的剩余电流监控仪表,该剩余电流继电器已广泛应用在民用建筑住宅分户箱进线或单相或三相用电设备配电线路中。

ASJ series residual current relay has a very high performance-price ratio. As an advanced intelligent and digital residual current monitoring instrument, the residual current relay has been widely used in the incoming line or single-phase or three-phase of the household sub-box of civil buildings. Electric equipment in the power distribution line.

参考文献 Bibliography

1.Solutions For Enterprise Micro-grid System 2021.04

安科瑞 缪阳扬

本文来自互联网用户投稿,该文观点仅代表作者本人,不代表本站立场。本站仅提供信息存储空间服务,不拥有所有权,不承担相关法律责任。如若转载,请注明出处:http://www.coloradmin.cn/o/1130780.html

如若内容造成侵权/违法违规/事实不符,请联系多彩编程网进行投诉反馈,一经查实,立即删除!

相关文章

asp.net乡村旅游管理系统VS开发sqlserver数据库web结构c#编程Microsoft Visual Studio

一、源码特点 asp.net乡村旅游管理系统是一套完善的web设计管理系统系统,系统具有完整的源代码和数据库,系统主要采用B/S模式开发。开发环境为vs2010,数据库为sqlserver2008,使用c# 语言开发 asp.net乡村旅游管理系统 二、…

2018年亚太杯APMCM数学建模大赛B题人才与城市发展求解全过程文档及程序

2018年亚太杯APMCM数学建模大赛 B题 人才与城市发展 原题再现 招贤纳士是过去几年来许多城市的亮点之一。北京、上海、武汉、成都、西安、深圳,实际上都在用各种吸引人的政策来争夺人才。人才代表着城市创新发展的动力,因为他们能够在更短的时间内学习…

Linux国产系统无法连接身份证读卡器USB权限解决办法

​ 如上图:连接身份证读卡器失败 接入读卡器后,运行output,读卡报错:libusb open device with pid vid: Resource temporarily unavailable,连接读卡器失败,t_nRe -1 ,这是由于未接入读卡器或…

JavaEE 网络原理——TCP的工作机制(末篇 其余TCP特点)

文章目录 一、滑动窗口二、流量控制三、拥堵控制四、延时应答五、捎带应答六、面向字节流七、异常情况八、总结 其余相关文章: JavaEE 网络原理——TCP的工作机制(中篇 三次握手和四次挥手) 本篇文章衔接的是前面两篇文章的内容,在这里继续解释 TCP 的内…

GO语言代码示例

首先,我们需要安装 rod 库,这是一个用于构建网络爬虫的 Go 语言库。 使用 go get 命令安装 rod 库:go get -u github.com/gofiber/rod 创建一个新的 Go 程序文件,例如:main.go 在 main.go 文件中,导入 r…

(免费领源码)java#Springboot#mysql 大学生兼职平台94598-计算机毕业设计项目选题推荐

摘 要 当今人类社会已经进入信息全球化和全球信息化、网络化的高速发展阶段。丰富的网络信息已经成为人们工作、生活、学习中不可缺少的一部分。人们正在逐步适应和习惯于网上贸易、网上购物、网上支付、网上服务和网上娱乐等活动,人类的许多社会活动正在向网络化发…

认识环境变量和进程替换,实现一个简易的shell

文章目录 一、环境变量1.什么是环境变量2.环境变量的分类3.查看环境变量4.设置环境变量5.获取环境变量 二、进程控制1.进程终止2.进程等待3.进程替换 三、实现一个简单的shell 一、环境变量 1.什么是环境变量 首先,在百度百科中,环境变量的解释是这样的…

第1篇 目标检测概述 —(3)目标检测评价指标

前言:Hello大家好,我是小哥谈。目标检测评价指标是用来衡量目标检测算法性能的指标,主要包括几个指标:精确率(Precision)、召回率(Recall)、交并比(IoU)、平均…

ES SearchAPI----Query DSL语言

文章目录 Getting Startedmatch_all查询全部sort排序from\size分页_source指定字段 match匹配查询match_phrase短语匹配multi_match多字段匹配range范围查询bool复合查询must必须匹配,可贡献得分must_not必须不匹配,可贡献得分should可有可无&#xff0c…

GIS 数据结构BSP树

BSP树(Binary Space Partitioning Tree,二值空间划分树)的主要思想是将空间分割成更小的部分,从而使空间查询和其他运算更加高效。每个节点在BSP树中代表一个空间区域,这个区域可以进一步被子节点所分割。 一旦把凹形区…

C# 读取文件类型

获取示例 代码 using System; using System.Collections.Generic; using System.IO; using System.Linq; using System.Runtime.InteropServices; using System.Text; using System.Threading.Tasks;namespace ConsoleApp6filetype {internal class Program{static void Main(…

使用openlayers加载离线瓦片地图

一、需求背景 我们现在的项目就说使用openlayer geoServer自己发布的矢量地图,是和公安合作的项目,由于政府大都使用的是天地图,所以需要将geoServer的矢量地图改为天地图,搭配openlayers使用,openlayers还可以切换不…

spi的基本知识、软件spi、硬件spi(ADXL362为测试对象)

一、spi基础知识 1.1、spi基础知识一 SPI(Serial Peripheral Interface,串行外设接口)是由摩托罗拉(Motorola)在1980前后提出的一种全双工同步串行通信接口,它用于MCU与各种外围设备以串行方式进行通…

纹波类型及纹波抑制措施

纹波主要有这几种类型:输入低频纹波、高频纹波、寄生参数引起的共模纹波噪声、功率器件开关过程中产生的超高频谐振噪声和闭环调节控制引起的纹波噪声。 1、低频纹波 低频纹波是与输出电路的滤波电容容量相关。电容的容量不可能无限制地增加,导致输出低…

视频号视频提取小程序,快速下载视频号视频

​视频号提取小程序可以帮助用户方便地从视频号视频平台获取到自己喜欢的视频号内容。通过这个小程序,你可以快速搜索并提取出视频号,并进行相关的操作。 据悉视频下载bot小程序目前已经更名为【提取下载小助手】 使用视频号提取小程序有以下几个步骤&…

postgresql group by之后对string字段进行拼接

数据如下 想要的效果 sql 如下 SELECT company_id, string_agg(employee, , ORDER BY employee) FROM mytable GROUP BY company_id;PostgreSQL STRING_AGG()函数是一个聚合函数,用于连接字符串列表并在它们之间放置分隔符。该函数不会在字符串的末尾添加分隔符。…

C语言猜数字小游戏(也包含python实现的用法)

猜数字小游戏 前言1. C语言中随机数生成1.1 rand1.2 srand1.3 time1.4 设置随机数的范围 2. 猜数字游戏实现C语言实现猜数字小游戏python方法实现猜数字小游戏 前言 本文基于VS2022、pycharm和前面的知识,写一个凭借分支与循环的小游戏,比如&#xff1a…

C# 使用using报错CS1674解决办法

Severity Code Description Project File Line Suppression State Error CS1674 ‘MutipleThreadResetEvent’: type used in a using statement must be implicitly convertible to ‘System.IDisposable’. 第一种解决方法:工具 -.NuGet下载EntityFramework是否能…

C++设计模式_12_Singleton 单件模式

在之前的博文C57个入门知识点_44:单例的实现与理解中,已经详细介绍了单例模式,并且根据其中内容,单例模式已经可以在日常编码中被使用,本文将会再做梳理。 Singleton 单件模式可以说是最简单的设计模式,但由…

力扣第1005题 K 次取反后最大化的数组和 c++ 贪心 双思维

题目 1005. K 次取反后最大化的数组和 简单 相关标签 贪心 数组 排序 给你一个整数数组 nums 和一个整数 k ,按以下方法修改该数组: 选择某个下标 i 并将 nums[i] 替换为 -nums[i] 。 重复这个过程恰好 k 次。可以多次选择同一个下标 i 。 以…