Kubernetes高可用集群二进制部署（四）部署kubectl和kube-controller-manager、kube-scheduler

Kubernetes概述
使用kubeadm快速部署一个k8s集群
Kubernetes高可用集群二进制部署（一）主机准备和负载均衡器安装
Kubernetes高可用集群二进制部署（二）ETCD集群部署
Kubernetes高可用集群二进制部署（三）部署api-server
Kubernetes高可用集群二进制部署（四）部署kubectl和kube-controller-manager、kube-scheduler
Kubernetes高可用集群二进制部署（五）kubelet、kube-proxy、Calico、CoreDNS
Kubernetes高可用集群二进制部署（六）Kubernetes集群节点添加

1. 部署kubectl

1.1 创建kubectl证书请求文件

在master1执行

[root@k8s-master1 /]#cd /data/k8s-work
cat > admin-csr.json << "EOF"
{
  "CN": "admin",
  "hosts": [], #通过conf文件对集群进行访问，所以这里不指定主机
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "system:masters",             
      "OU": "system"
    }
  ]
}
EOF

说明：

后续 kube-apiserver 使用 RBAC 对客户端(如 kubelet、kube-proxy、Pod)请求进行授权；
kube-apiserver 预定义了一些 RBAC 使用的 RoleBindings，如 cluster-admin 将 Group system:masters 与 Role cluster-admin 绑定，该 Role 授予了调用kube-apiserver 的所有 API的权限；
O指定该证书的 Group 为 system:masters，kubelet 使用该证书访问 kube-apiserver 时 ，由于证书被 CA 签名，所以认证通过，同时由于证书用户组为经过预授权的 system:masters，所以被授予访问所有 API 的权限；
注：
这个admin 证书，是将来生成管理员用的kubeconfig 配置文件用的，现在我们一般建议使用RBAC 来对kubernetes 进行角色权限控制， kubernetes 将证书中的CN 字段 作为User， O 字段作为 Group；
"O": "system:masters", 必须是system:masters，否则后面kubectl create clusterrolebinding报错。

1.2 生成证书文件

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin

1.3 复制文件到指定目录

cp admin*.pem /etc/kubernetes/ssl/

1.4 生成kubeconfig配置文件

kube.config`` 为 kubectl 的配置文件，包含访问 `apiserver 的所有信息，如 apiserver 地址、CA 证书和自身使用的证书

kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.10.100:6443 --kubeconfig=kube.config

# cat kube.config

#设置管理员证书
kubectl config set-credentials admin --client-certificate=admin.pem --client-key=admin-key.pem --embed-certs=true --kubeconfig=kube.config

# cat kube.config

#设置安全上下文
kubectl config set-context kubernetes --cluster=kubernetes --user=admin --kubeconfig=kube.config

# cat kube.config

kubectl config use-context kubernetes --kubeconfig=kube.config

1.5 准备kubectl配置文件并进行角色绑定

mkdir ~/.kube
cp kube.config ~/.kube/config
kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kubernetes --kubeconfig=/root/.kube/config

1.6 查看集群状态

export KUBECONFIG=$HOME/.kube/config

kubectl cluster-info
kubectl get componentstatuses
kubectl get all --all-namespaces

1.7 同步kubectl配置文件到集群其它master节点

k8s-master2:
mkdir /root/.kube

k8s-master3:
mkdir /root/.kube

scp /root/.kube/config k8s-master2:/root/.kube/config
scp /root/.kube/config k8s-master3:/root/.kube/config

1.8 配置kubectl命令补全(可选)

yum install -y bash-completion
source /usr/share/bash-completion/bash_completion
source <(kubectl completion bash)
kubectl completion bash > ~/.kube/completion.bash.inc
source '/root/.kube/completion.bash.inc'  
source $HOME/.bash_profile

2. 部署kube-controller-manager

2.1 创建kube-controller-manager证书请求文件

在master1执行

[root@k8s-master1 k8s-work]#cat > kube-controller-manager-csr.json << "EOF"
{
    "CN": "system:kube-controller-manager",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "hosts": [
      "127.0.0.1",
      "192.168.10.103", #三台master的ip
      "192.168.10.104",
      "192.168.10.105"
    ],
    "names": [
      {
        "C": "CN",
        "ST": "Beijing",
        "L": "Beijing",
        "O": "system:kube-controller-manager",
        "OU": "system"
      }
    ]
}
EOF

说明：

hosts 列表包含所有 kube-controller-manager 节点 IP；
CN 为 system:kube-controller-manager、O 为 system:kube-controller-manager，kubernetes 内置的 ClusterRoleBindings system:kube-controller-manager 赋予 kube-controller-manager 工作所需的权限

2.2 创建kube-controller-manager证书文件

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager

# ls

kube-controller-manager.csr     
kube-controller-manager-csr.json
kube-controller-manager-key.pem
kube-controller-manager.pem

2.3 创建kube-controller-manager的kube-controller-manager.kubeconfig

kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.10.100:6443 --kubeconfig=kube-controller-manager.kubeconfig

kubectl config set-credentials system:kube-controller-manager --client-certificate=kube-controller-manager.pem --client-key=kube-controller-manager-key.pem --embed-certs=true --kubeconfig=kube-controller-manager.kubeconfig

kubectl config set-context system:kube-controller-manager --cluster=kubernetes --user=system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig

kubectl config use-context system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig

2.4 创建kube-controller-manager配置文件

cat > kube-controller-manager.conf << "EOF"
KUBE_CONTROLLER_MANAGER_OPTS="--port=10252 \
  --secure-port=10257 \
  --bind-address=127.0.0.1 \
  --kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \
  --service-cluster-ip-range=10.96.0.0/16 \
  --cluster-name=kubernetes \
  --cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem \
  --cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \
  --allocate-node-cidrs=true \
  --cluster-cidr=10.244.0.0/16 \
  --experimental-cluster-signing-duration=87600h \
  --root-ca-file=/etc/kubernetes/ssl/ca.pem \
  --service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem \
  --leader-elect=true \
  --feature-gates=RotateKubeletServerCertificate=true \
  --controllers=*,bootstrapsigner,tokencleaner \
  --horizontal-pod-autoscaler-use-rest-clients=true \
  --horizontal-pod-autoscaler-sync-period=10s \
  --tls-cert-file=/etc/kubernetes/ssl/kube-controller-manager.pem \
  --tls-private-key-file=/etc/kubernetes/ssl/kube-controller-manager-key.pem \
  --use-service-account-credentials=true \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=2"
EOF

2.5 创建服务启动文件

[root@k8s-master1 k8s-work]# cat > kube-controller-manager.service << "EOF"
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/kube-controller-manager.conf
ExecStart=/usr/local/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

2.6 同步文件到集群master节点

cp kube-controller-manager*.pem /etc/kubernetes/ssl/
cp kube-controller-manager.kubeconfig /etc/kubernetes/
cp kube-controller-manager.conf /etc/kubernetes/
cp kube-controller-manager.service /usr/lib/systemd/system/

scp  kube-controller-manager*.pem k8s-master2:/etc/kubernetes/ssl/
scp  kube-controller-manager*.pem k8s-master3:/etc/kubernetes/ssl/
scp  kube-controller-manager.kubeconfig kube-controller-manager.conf k8s-master2:/etc/kubernetes/
scp  kube-controller-manager.kubeconfig kube-controller-manager.conf k8s-master3:/etc/kubernetes/
scp  kube-controller-manager.service k8s-master2:/usr/lib/systemd/system/
scp  kube-controller-manager.service k8s-master3:/usr/lib/systemd/system/

#查看证书
openssl x509 -in /etc/kubernetes/ssl/kube-controller-manager.pem -noout -text

2.7 启动服务

systemctl daemon-reload 
systemctl enable --now kube-controller-manager
systemctl status kube-controller-manager

kubectl get componentstatuses

3. 部署kube-scheduler

3.1 创建kube-scheduler证书请求文件

[root@k8s-master1 k8s-work]# cat > kube-scheduler-csr.json << "EOF"
{
    "CN": "system:kube-scheduler",
    "hosts": [
      "127.0.0.1",
      "192.168.10.103",
      "192.168.10.104",
      "192.168.10.105"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
      {
        "C": "CN",
        "ST": "Beijing",
        "L": "Beijing",
        "O": "system:kube-scheduler",
        "OU": "system"
      }
    ]
}
EOF

3.2 生成kube-scheduler证书

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler

# ls
kube-scheduler.csr
kube-scheduler-csr.json
kube-scheduler-key.pem
kube-scheduler.pem

3.3 创建kube-scheduler的kubeconfig

kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.10.100:6443 --kubeconfig=kube-scheduler.kubeconfig

kubectl config set-credentials system:kube-scheduler --client-certificate=kube-scheduler.pem --client-key=kube-scheduler-key.pem --embed-certs=true --kubeconfig=kube-scheduler.kubeconfig

kubectl config set-context system:kube-scheduler --cluster=kubernetes --user=system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig

kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig

3.4 创建服务配置文件

cat > kube-scheduler.conf << "EOF"
KUBE_SCHEDULER_OPTS="--address=127.0.0.1 \
--kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig \
--leader-elect=true \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2"
EOF

3.5创建服务启动配置文件

cat > kube-scheduler.service << "EOF"
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/kube-scheduler.conf
ExecStart=/usr/local/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

3.6 同步文件至集群master节点

cp kube-scheduler*.pem /etc/kubernetes/ssl/
cp kube-scheduler.kubeconfig /etc/kubernetes/
cp kube-scheduler.conf /etc/kubernetes/
cp kube-scheduler.service /usr/lib/systemd/system/

scp  kube-scheduler*.pem k8s-master2:/etc/kubernetes/ssl/
scp  kube-scheduler*.pem k8s-master3:/etc/kubernetes/ssl/
scp  kube-scheduler.kubeconfig kube-scheduler.conf k8s-master2:/etc/kubernetes/
scp  kube-scheduler.kubeconfig kube-scheduler.conf k8s-master3:/etc/kubernetes/
scp  kube-scheduler.service k8s-master2:/usr/lib/systemd/system/
scp  kube-scheduler.service k8s-master3:/usr/lib/systemd/system/

3.7 启动服务

systemctl daemon-reload
systemctl enable --now kube-scheduler
systemctl status kube-scheduler

kubectl get componentstatuses

[外链图片转存失败,源站可能有防盗链机制,建议将图片保存下来直接上传(img-KAnxrdBq-1691074083716)(img/2023-08-02-22-15-45.png)]## 1. 部署kubectl

1.1 创建kubectl证书请求文件

在master1执行

[root@k8s-master1 /]#cd /data/k8s-work
cat > admin-csr.json << "EOF"
{
  "CN": "admin",
  "hosts": [], #通过conf文件对集群进行访问，所以这里不指定主机
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Beijing",
      "L": "Beijing",
      "O": "system:masters",             
      "OU": "system"
    }
  ]
}
EOF

说明：

后续 kube-apiserver 使用 RBAC 对客户端(如 kubelet、kube-proxy、Pod)请求进行授权；
kube-apiserver 预定义了一些 RBAC 使用的 RoleBindings，如 cluster-admin 将 Group system:masters 与 Role cluster-admin 绑定，该 Role 授予了调用kube-apiserver 的所有 API的权限；
O指定该证书的 Group 为 system:masters，kubelet 使用该证书访问 kube-apiserver 时 ，由于证书被 CA 签名，所以认证通过，同时由于证书用户组为经过预授权的 system:masters，所以被授予访问所有 API 的权限；
注：
这个admin 证书，是将来生成管理员用的kubeconfig 配置文件用的，现在我们一般建议使用RBAC 来对kubernetes 进行角色权限控制， kubernetes 将证书中的CN 字段 作为User， O 字段作为 Group；
"O": "system:masters", 必须是system:masters，否则后面kubectl create clusterrolebinding报错。

1.2 生成证书文件

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes admin-csr.json | cfssljson -bare admin

1.3 复制文件到指定目录

cp admin*.pem /etc/kubernetes/ssl/

1.4 生成kubeconfig配置文件

kube.config`` 为 kubectl 的配置文件，包含访问 `apiserver 的所有信息，如 apiserver 地址、CA 证书和自身使用的证书

kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.10.100:6443 --kubeconfig=kube.config

# cat kube.config

#设置管理员证书
kubectl config set-credentials admin --client-certificate=admin.pem --client-key=admin-key.pem --embed-certs=true --kubeconfig=kube.config

# cat kube.config

#设置安全上下文
kubectl config set-context kubernetes --cluster=kubernetes --user=admin --kubeconfig=kube.config

# cat kube.config

kubectl config use-context kubernetes --kubeconfig=kube.config

1.5 准备kubectl配置文件并进行角色绑定

mkdir ~/.kube
cp kube.config ~/.kube/config
kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kubernetes --kubeconfig=/root/.kube/config

1.6 查看集群状态

export KUBECONFIG=$HOME/.kube/config

kubectl cluster-info
kubectl get componentstatuses
kubectl get all --all-namespaces

1.7 同步kubectl配置文件到集群其它master节点

k8s-master2:
mkdir /root/.kube

k8s-master3:
mkdir /root/.kube

scp /root/.kube/config k8s-master2:/root/.kube/config
scp /root/.kube/config k8s-master3:/root/.kube/config

1.8 配置kubectl命令补全(可选)

yum install -y bash-completion
source /usr/share/bash-completion/bash_completion
source <(kubectl completion bash)
kubectl completion bash > ~/.kube/completion.bash.inc
source '/root/.kube/completion.bash.inc'  
source $HOME/.bash_profile

2. 部署kube-controller-manager

2.1 创建kube-controller-manager证书请求文件

在master1执行

[root@k8s-master1 k8s-work]#cat > kube-controller-manager-csr.json << "EOF"
{
    "CN": "system:kube-controller-manager",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "hosts": [
      "127.0.0.1",
      "192.168.10.103", #三台master的ip
      "192.168.10.104",
      "192.168.10.105"
    ],
    "names": [
      {
        "C": "CN",
        "ST": "Beijing",
        "L": "Beijing",
        "O": "system:kube-controller-manager",
        "OU": "system"
      }
    ]
}
EOF

说明：

hosts 列表包含所有 kube-controller-manager 节点 IP；
CN 为 system:kube-controller-manager、O 为 system:kube-controller-manager，kubernetes 内置的 ClusterRoleBindings system:kube-controller-manager 赋予 kube-controller-manager 工作所需的权限

2.2 创建kube-controller-manager证书文件

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-controller-manager-csr.json | cfssljson -bare kube-controller-manager

# ls

kube-controller-manager.csr     
kube-controller-manager-csr.json
kube-controller-manager-key.pem
kube-controller-manager.pem

2.3 创建kube-controller-manager的kube-controller-manager.kubeconfig

kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.10.100:6443 --kubeconfig=kube-controller-manager.kubeconfig

kubectl config set-credentials system:kube-controller-manager --client-certificate=kube-controller-manager.pem --client-key=kube-controller-manager-key.pem --embed-certs=true --kubeconfig=kube-controller-manager.kubeconfig

kubectl config set-context system:kube-controller-manager --cluster=kubernetes --user=system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig

kubectl config use-context system:kube-controller-manager --kubeconfig=kube-controller-manager.kubeconfig

2.4 创建kube-controller-manager配置文件

cat > kube-controller-manager.conf << "EOF"
KUBE_CONTROLLER_MANAGER_OPTS="--port=10252 \
  --secure-port=10257 \
  --bind-address=127.0.0.1 \
  --kubeconfig=/etc/kubernetes/kube-controller-manager.kubeconfig \
  --service-cluster-ip-range=10.96.0.0/16 \
  --cluster-name=kubernetes \
  --cluster-signing-cert-file=/etc/kubernetes/ssl/ca.pem \
  --cluster-signing-key-file=/etc/kubernetes/ssl/ca-key.pem \
  --allocate-node-cidrs=true \
  --cluster-cidr=10.244.0.0/16 \
  --experimental-cluster-signing-duration=87600h \
  --root-ca-file=/etc/kubernetes/ssl/ca.pem \
  --service-account-private-key-file=/etc/kubernetes/ssl/ca-key.pem \
  --leader-elect=true \
  --feature-gates=RotateKubeletServerCertificate=true \
  --controllers=*,bootstrapsigner,tokencleaner \
  --horizontal-pod-autoscaler-use-rest-clients=true \
  --horizontal-pod-autoscaler-sync-period=10s \
  --tls-cert-file=/etc/kubernetes/ssl/kube-controller-manager.pem \
  --tls-private-key-file=/etc/kubernetes/ssl/kube-controller-manager-key.pem \
  --use-service-account-credentials=true \
  --alsologtostderr=true \
  --logtostderr=false \
  --log-dir=/var/log/kubernetes \
  --v=2"
EOF

2.5 创建服务启动文件

[root@k8s-master1 k8s-work]# cat > kube-controller-manager.service << "EOF"
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/kube-controller-manager.conf
ExecStart=/usr/local/bin/kube-controller-manager $KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

2.6 同步文件到集群master节点

cp kube-controller-manager*.pem /etc/kubernetes/ssl/
cp kube-controller-manager.kubeconfig /etc/kubernetes/
cp kube-controller-manager.conf /etc/kubernetes/
cp kube-controller-manager.service /usr/lib/systemd/system/

scp  kube-controller-manager*.pem k8s-master2:/etc/kubernetes/ssl/
scp  kube-controller-manager*.pem k8s-master3:/etc/kubernetes/ssl/
scp  kube-controller-manager.kubeconfig kube-controller-manager.conf k8s-master2:/etc/kubernetes/
scp  kube-controller-manager.kubeconfig kube-controller-manager.conf k8s-master3:/etc/kubernetes/
scp  kube-controller-manager.service k8s-master2:/usr/lib/systemd/system/
scp  kube-controller-manager.service k8s-master3:/usr/lib/systemd/system/

#查看证书
openssl x509 -in /etc/kubernetes/ssl/kube-controller-manager.pem -noout -text

2.7 启动服务

systemctl daemon-reload 
systemctl enable --now kube-controller-manager
systemctl status kube-controller-manager

kubectl get componentstatuses

3. 部署kube-scheduler

3.1 创建kube-scheduler证书请求文件

[root@k8s-master1 k8s-work]# cat > kube-scheduler-csr.json << "EOF"
{
    "CN": "system:kube-scheduler",
    "hosts": [
      "127.0.0.1",
      "192.168.10.103",
      "192.168.10.104",
      "192.168.10.105"
    ],
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
      {
        "C": "CN",
        "ST": "Beijing",
        "L": "Beijing",
        "O": "system:kube-scheduler",
        "OU": "system"
      }
    ]
}
EOF

3.2 生成kube-scheduler证书

cfssl gencert -ca=ca.pem -ca-key=ca-key.pem -config=ca-config.json -profile=kubernetes kube-scheduler-csr.json | cfssljson -bare kube-scheduler

# ls
kube-scheduler.csr
kube-scheduler-csr.json
kube-scheduler-key.pem
kube-scheduler.pem

3.3 创建kube-scheduler的kubeconfig

kubectl config set-cluster kubernetes --certificate-authority=ca.pem --embed-certs=true --server=https://192.168.10.100:6443 --kubeconfig=kube-scheduler.kubeconfig

kubectl config set-credentials system:kube-scheduler --client-certificate=kube-scheduler.pem --client-key=kube-scheduler-key.pem --embed-certs=true --kubeconfig=kube-scheduler.kubeconfig

kubectl config set-context system:kube-scheduler --cluster=kubernetes --user=system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig

kubectl config use-context system:kube-scheduler --kubeconfig=kube-scheduler.kubeconfig

3.4 创建服务配置文件

cat > kube-scheduler.conf << "EOF"
KUBE_SCHEDULER_OPTS="--address=127.0.0.1 \
--kubeconfig=/etc/kubernetes/kube-scheduler.kubeconfig \
--leader-elect=true \
--alsologtostderr=true \
--logtostderr=false \
--log-dir=/var/log/kubernetes \
--v=2"
EOF

3.5创建服务启动配置文件

cat > kube-scheduler.service << "EOF"
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=-/etc/kubernetes/kube-scheduler.conf
ExecStart=/usr/local/bin/kube-scheduler $KUBE_SCHEDULER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

3.6 同步文件至集群master节点

cp kube-scheduler*.pem /etc/kubernetes/ssl/
cp kube-scheduler.kubeconfig /etc/kubernetes/
cp kube-scheduler.conf /etc/kubernetes/
cp kube-scheduler.service /usr/lib/systemd/system/

scp  kube-scheduler*.pem k8s-master2:/etc/kubernetes/ssl/
scp  kube-scheduler*.pem k8s-master3:/etc/kubernetes/ssl/
scp  kube-scheduler.kubeconfig kube-scheduler.conf k8s-master2:/etc/kubernetes/
scp  kube-scheduler.kubeconfig kube-scheduler.conf k8s-master3:/etc/kubernetes/
scp  kube-scheduler.service k8s-master2:/usr/lib/systemd/system/
scp  kube-scheduler.service k8s-master3:/usr/lib/systemd/system/

3.7 启动服务

systemctl daemon-reload
systemctl enable --now kube-scheduler
systemctl status kube-scheduler

kubectl get componentstatuses

在这里插入图片描述