采用python3.12 +django5.1 结合 RabbitMQ 和发送邮件功能,实现一个简单的告警系统前后端分离 vue-element

一、开发环境搭建和配置

#mac环境
brew install python@3.12
python3.12 --version
python3.12 -m pip install --upgrade pip
python3.12 -m pip install Django==5.1
python3.12 -m django --version
#用于检索系统信息和进程管理
python3.12 -m pip install psutil
#集成 pika 用于 RabbitMQ
python3.12 -m pip install pika



#要在 Docker 中安装 RabbitMQ 并开启 WebSocket 端口 15674
docker run -d --name rabbitmq \
-p 5672:5672 \
-p 15672:15672 \
-p 15674:15674 \
rabbitmq:3-management

#进入容器内部
docker exec -it rabbitmq bash

#在容器内部，启用 WebSocket 插件：
rabbitmq-plugins enable rabbitmq_web_stomp

二、构建django应用

# 创建 monitor-plat 项目
django-admin startproject operation


#项目结构
operation
├── __init__.py
├── __pycache__
│   ├── __init__.cpython-313.pyc
│   ├── settings.cpython-313.pyc
│   ├── urls.cpython-313.pyc
│   └── wsgi.cpython-313.pyc
├── asgi.py
├── common
│   ├── __init__.py
│   ├── __pycache__
│   │   └── __init__.cpython-313.pyc
│   ├── enum
│   │   ├── EventTypesEnum.py
│   │   ├── OperatorTypeEnum.py
│   │   ├── ResponeCodeEnum.py
│   │   ├── __init__.py
│   │   └── __pycache__
│   │       ├── EventTypesEnum.cpython-313.pyc
│   │       ├── OperatorTypeEnum.cpython-313.pyc
│   │       ├── ResponeCodeEnum.cpython-313.pyc
│   │       └── __init__.cpython-313.pyc
│   ├── exception
│   │   ├── BusinessException.py
│   │   ├── __init__.py
│   │   └── __pycache__
│   │       ├── BusinessException.cpython-313.pyc
│   │       └── __init__.cpython-313.pyc
│   └── utils
│       ├── CommonResult.py
│       ├── PageUtils.py
│       ├── Serializers.py
│       ├── __init__.py
│       └── __pycache__
│           ├── CommonResult.cpython-313.pyc
│           ├── PageUtils.cpython-313.pyc
│           ├── Serializers.cpython-313.pyc
│           └── __init__.cpython-313.pyc
├── settings.py
├── urls.py
└── wsgi.py
log
├── __init__.py
├── __pycache__
│   ├── __init__.cpython-313.pyc
│   ├── admin.cpython-313.pyc
│   ├── apps.cpython-313.pyc
│   ├── models.cpython-313.pyc
│   └── views.cpython-313.pyc
├── admin.py
├── apps.py
├── migrations
│   ├── 0001_initial.py
│   ├── __init__.py
│   └── __pycache__
│       ├── 0001_initial.cpython-313.pyc
│       └── __init__.cpython-313.pyc
├── models.py
├── tests.py
└── views.py
dbOperations
├── __init__.py
├── __pycache__
│   ├── __init__.cpython-313.pyc
│   ├── admin.cpython-313.pyc
│   ├── apps.cpython-313.pyc
│   ├── models.cpython-313.pyc
│   └── views.cpython-313.pyc
├── admin.py
├── apps.py
├── migrations
│   ├── __init__.py
│   └── __pycache__
│       └── __init__.cpython-313.pyc
├── models.py
├── tests.py
└── views.py
user
├── __init__.py
├── __pycache__
│   ├── __init__.cpython-313.pyc
│   ├── admin.cpython-313.pyc
│   ├── apps.cpython-313.pyc
│   ├── models.cpython-313.pyc
│   └── views.cpython-313.pyc
├── admin.py
├── apps.py
├── migrations
│   ├── 0001_initial.py
│   ├── __init__.py
│   └── __pycache__
│       ├── 0001_initial.cpython-313.pyc
│       └── __init__.cpython-313.pyc
├── models.py
├── tests.py
└── views.py
monitor
├── __init__.py
├── __pycache__
│   ├── __init__.cpython-313.pyc
│   ├── admin.cpython-313.pyc
│   ├── apps.cpython-313.pyc
│   ├── models.cpython-313.pyc
│   ├── signals.cpython-313.pyc
│   ├── tasks.cpython-313.pyc
│   └── views.cpython-313.pyc
├── admin.py
├── apps.py
├── migrations
│   ├── 0001_initial.py
│   ├── __init__.py
│   └── __pycache__
│       ├── 0001_initial.cpython-313.pyc
│       └── __init__.cpython-313.pyc
├── models.py
├── signals.py
├── tasks.py
├── tests.py
└── views.py

三、监控,告警相关代码

monitor
├── __init__.py
├── __pycache__
│   ├── __init__.cpython-313.pyc
│   ├── admin.cpython-313.pyc
│   ├── apps.cpython-313.pyc
│   ├── models.cpython-313.pyc
│   ├── signals.cpython-313.pyc
│   ├── tasks.cpython-313.pyc
│   └── views.cpython-313.pyc

#=========================tasks.py=========================
import logging
import multiprocessing

import pika
import json
import psutil
import time
from monitor.models import ServerSecurityEventLog
from operation import settings
from operation.common.enum.EventTypesEnum import EventTypesEnum

"""
    监控服务器 性能  

"""
def send_memory_data():
    connection = None
    channel = None

    #获取 rabbitmq配置
    rabbitmq_config = settings.RABBITMQ_CONFIG
    try:
        connection = pika.BlockingConnection(pika.ConnectionParameters(
            host=rabbitmq_config['host'],
            port=rabbitmq_config['port'],
            virtual_host=rabbitmq_config['virtual_host'],
            credentials=pika.PlainCredentials(rabbitmq_config['user'], rabbitmq_config['password'])
        ))
        channel = connection.channel()
        channel.queue_declare(queue='virtual_queue',durable=True)
        print("连接成功")
        logging.info("连接成功")
    except pika.exceptions.AMQPConnectionError as e:
        logging.error(f"无法连接到AMQP服务器: {e}")
        return  # 如果连接失败，直接返回，避免后续代码执行

    try:
        while True:
            cpu_usage = psutil.cpu_percent(interval=1)
            cup_num = multiprocessing.cpu_count()
            memory_usage = psutil.virtual_memory()
            use_memory_usage = round(memory_usage.percent / (1024 * 1024 * 1024), 2)  # 获取已使用的内存
            memory_usage_total = round(memory_usage.total / (1024 * 1024 * 1024), 2)  # 获取总内存
            free_usage = round(memory_usage.active / (1024 * 1024 * 1024), 2)  # 获取 空闲内存
            disk_usage = psutil.disk_usage('/')  # 获取根目录的磁盘使用情况
            disk_usage_total = round(disk_usage.total / (1024 * 1024 * 1024), 2)  # 获取磁盘总容量
            free_disk_usage = round(disk_usage.free / (1024 * 1024 * 1024), 2)  # 获取磁盘剩余容量
            network_io = psutil.net_io_counters()
            #告警逻辑 保存event事件
            save_serverSecurity_event(cpu_usage, memory_usage.percent, disk_usage.percent, network_io)
            memory_usage_data = {
                'cpu_usage': cpu_usage,  # CPU的使用率。百分比
                'cup_num': cup_num,
                'use_memory_usage': use_memory_usage,  # 内存的使用情况。通以字节（bytes）或更常见的单位（如MB、GB）表示
                'memory_usage_total': memory_usage_total,
                'free_usage': free_usage,  # 空闲内存
                'disk_usage': disk_usage,  # 磁盘的使用情况。通常以字节（bytes）
                'disk_usage_total': disk_usage_total,  # 获取磁盘总容量
                'free_disk_usage': free_disk_usage,  # 获取磁盘剩余容量
                'network_io': network_io  # 表示网络输入/输出的情况 通常以字节（bytes）
            }
            # 发送rabbitmq
            channel.basic_publish(
                exchange='',
                routing_key='virtual_queue',
                body=json.dumps(memory_usage_data)
            )
            logging.info("数据发送成功")
            time.sleep(5)  # 每5秒发送一次
    except Exception as e:
        logging.error(f"数据发送失败: {e}")
    finally:
        if connection and connection.is_open:
            connection.close()


"""
   保存告警逻辑 
"""
def save_serverSecurity_event(cpu_usage,memory_usage,disk_usage,network_io):
    logging.info("保存告警逻辑=====================================")
    # 告警逻辑
    if (cpu_usage > settings.CPU_THRESHOLD or
            memory_usage > settings.MEMORY_THRESHOLD or
            disk_usage > settings.DISK_THRESHOLD or
            network_io.packets_recv == settings.PACKET_RECV_THRESHOLD or
            network_io.packets_sent == settings.PACKETS_SENT_THRESHOLD):
        event_type = None
        event_details = ""

        # 当cpu使用率大于90%时 记录cpu
        if cpu_usage > settings.CPU_THRESHOLD:
            logging.info(f'CPU使用率超过90%')
            event_type = EventTypesEnum.CPU_OVERLOAD.value
            event_details = f'CPU使用率超过90%: {cpu_usage}%'
        elif memory_usage > settings.MEMORY_THRESHOLD:
            logging.info(f'内存使用率超过80%')
            event_type = EventTypesEnum.MEMORY_OVERLOAD.value
            event_details = f'内存使用率超过80%: 1.15MB%'
        elif disk_usage > settings.DISK_THRESHOLD:
            logging.info(f'磁盘使用率超过90%')
            event_type = EventTypesEnum.DISK_OVERLOAD.value
            event_details = f'磁盘使用率超过90%: {disk_usage}%'
        elif network_io.packets_recv == settings.PACKET_RECV_THRESHOLD or network_io.packets_sent == settings.PACKETS_SENT_THRESHOLD:
            logging.info(f'网络异常，接收或发送的数据包为0')
            event_type = EventTypesEnum.NETWORK_ANOMALY.value
            event_details = '网络异常，接收或发送的数据包为0'

        # 保存告警信息到数据库
        ServerSecurityEventLog.objects.create(
            event_type=event_type,
            event_details=event_details
        )

#========================signals.py=========================


"""
处理告警逻辑：
"""
import logging
import time
from datetime import datetime

from django.core.mail import send_mail
from django.db.models.signals import post_save
from django.dispatch import receiver

from monitor.models import ServerSecurityEventLog
from operation import settings

"""
    发送告警邮件 
"""

# 设置告警邮件的发送频率，单位为秒
ALERT_EMAIL_INTERVAL = 60 * 5  # 5分钟

# 上次发送告警邮件的时间
last_alert_email_time = 0


@receiver(post_save, sender=ServerSecurityEventLog)
def send_alert_email(sender, instance, **kwargs):
    #global 关键字: 在函数内部使用 global 关键字声明变量时，表示该变量是全局变量，
    # 而不是函数内部的局部变量。这样可以在函数内部修改全局变量的值。
    global last_alert_email_time
    #获取当前时间
    current_time = time.time()
    if current_time - last_alert_email_time >= ALERT_EMAIL_INTERVAL:
        logging.info("发送告警邮件====================")
        subject = '服务器告警'
        # 格式化时间为目标格式
        formatted_time = instance.event_time.strftime("%Y-%m-%d %H:%M:%S")
        message = (f'服务器状态异常，请立即检查！\n'
                   f'事件类型: {instance.event_type}\n'
                   f'事件详情: {instance.event_details}\n'
                   f'触发时间: {formatted_time}\n')
        from_email = settings.DEFAULT_FROM_EMAIL
        recipient_list = ['xxxxxxxx@qq.com']
        try:
            send_mail(subject, message, from_email, recipient_list)
            logging.info("邮件发送成功")
            last_alert_email_time = current_time  # 更新上次发送告警邮件的时间
        except Exception as e:
            logging.error(f"发送邮件失败 {e}")

#======================apps.py======================
from django.apps import AppConfig


class MonitorConfig(AppConfig):
    default_auto_field = 'django.db.models.BigAutoField'
    name = 'monitor'

    """
        ready 方法: 这是 AppConfig 类中的一个特殊方法，在 Django 应用启动时会被调用。通常用于执行一些初始化操作
    """
    def ready(self):
        # 注册信号  导入 monitor.signals 模块，用于注册 Django 信号。信号是 Django 中一种用于在特定事件发生时触发操作的机制。
        #@receiver(post_save, sender=ServerSecurityEventLog)  再做ServerSecurityEventLog 保存操作时 会 触发操作的机制。
        import monitor.signals
        # 导入任务函数: 从 tasks 模块中导入 send_memory_data 函数。
        from .tasks import send_memory_data
        #创建并启动线程: 使用 threading.Thread 创建一个新线程，
        #并将 send_memory_data 函数作为目标函数传递给线程。然后调用 thread.start() 启动线程。
        from threading import Thread
        thread = Thread(target=send_memory_data)
        thread.start()

#==========================models.py==========================


from django.db import models

# Create your models here.

#告警 models
class ServerSecurityEventLog(models.Model):
    EVENT_TYPES = (
        ('cpu_overload', 'CPU过载'),
        ('memory_overload', '内存过载'),
        ('disk_overload', '磁盘过载'),
        ('network_anomaly', '网络异常'),
    )

    event_type = models.CharField(max_length=50, choices=EVENT_TYPES)
    event_time = models.DateTimeField(auto_now_add=True)
    event_details = models.TextField()
    is_resolved = models.BooleanField(default=False)

    def __str__(self):
        return f"{self.event_type} - {self.event_time}"

    class Meta:
        db_table = 'server_security_events_log'  # 指定表名


    def to_dict(self):
        return {
            'id': self.id,
            'event_type':self.event_type,
            'event_details':self.event_details,
            'event_time':self.event_time,
            'is_resolved':self.is_resolved
        }

#=========================views.py=========================

#用于前端展示
import json
import multiprocessing

import psutil
from django.http import HttpResponse, JsonResponse
from django.views.decorators.csrf import csrf_exempt

from monitor.models import ServerSecurityEventLog
from operation.common.enum.ResponeCodeEnum import ResponseCodeEnum
from operation.common.exception.BusinessException import BusinessException
from operation.common.utils.CommonResult import CommonResult
from operation.common.utils.PageUtils import paginate_queryset



def getSystemInfo(request):
    try:
        if request.method != "GET":
            raise BusinessException(ResponseCodeEnum.METHOD_ERROR.message,ResponseCodeEnum.METHOD_ERROR.code)
        cpu_usage = psutil.cpu_percent(interval=1)
        cup_count = multiprocessing.cpu_count()
        memory_usage = psutil.virtual_memory()
        use_memory_usage = round(memory_usage.percent/(1024 * 1024 * 1024),2) #获取已使用的内存
        memory_usage_total = round(memory_usage.total/(1024 * 1024 * 1024),2) #获取总内存
        free_usage = round(memory_usage.active/(1024 * 1024 * 1024),2)      #获取 空闲内存存
        disk_usage = psutil.disk_usage('/')     #获取根目录的磁盘使用情况
        disk_usage_total = round(disk_usage.total/(1024 * 1024 * 1024),2)     #获取磁盘总容量
        free_disk_usage = round(disk_usage.free /(1024 * 1024 * 1024),2)     #获取磁盘剩余容量
        network_io = psutil.net_io_counters()
        data = {
            'cpu_usage': cpu_usage,    #CPU的使用率。百分比
            'cup_count':cup_count,
            'use_memory_usage': use_memory_usage, #内存的使用情况。通以字节（bytes）或更常见的单位（如MB、GB）表示
            'memory_usage_total':memory_usage_total,
            'free_usage':free_usage,   #空闲内存
            'disk_usage': disk_usage,   #磁盘的使用情况。通常以字节（bytes）
            'disk_usage_total':disk_usage_total, #获取磁盘总容量
            'free_disk_usage':free_disk_usage,  #获取磁盘剩余容量
            'network_io': network_io    #表示网络输入/输出的情况 通常以字节（bytes）
        }
        return JsonResponse(CommonResult.success_data(data), json_dumps_params={'ensure_ascii': False})
    except BusinessException as e:
        return JsonResponse(CommonResult.error(e.code,e.message), json_dumps_params={'ensure_ascii': False})




"""
 获取告警列表
"""
@csrf_exempt
def getAlarmList(request):
    if request.method == 'POST':
        json_data = request.body
        data = json.loads(json_data)
        page = data.get('page', 1)
        page_size = data.get('page_size', 10)
        serverSecurityEventLogs = ServerSecurityEventLog.objects.all().order_by('event_time')
        event_list, pagination_info = paginate_queryset(serverSecurityEventLogs, page, page_size)
        event_lists = [ServerSecurityEventLog.to_dict() for ServerSecurityEventLog in event_list]
        return JsonResponse(CommonResult.success_pagination(event_lists, pagination_info), json_dumps_params={'ensure_ascii': False})
    else:
        return JsonResponse(CommonResult.success_data(), json_dumps_params={'ensure_ascii': False})

#==============================EventTypesEnum工具类==============================




##############################EventTypesEnum##############################


"""
        ('cpu_overload', 'CPU过载'),
        ('memory_overload', '内存过载'),
        ('disk_overload', '磁盘过载'),
        ('network_anomaly', '网络异常'),
"""
from enum import Enum


class EventTypesEnum(Enum):
    CPU_OVERLOAD = ('cpu_overload', 'CPU过载')
    MEMORY_OVERLOAD = ('memory_overload', '内存过载')
    DISK_OVERLOAD = ('disk_overload', '磁盘过载')
    NETWORK_ANOMALY = ('network_anomaly', '网络异常')



    """
        Enum 的成员值不能直接是元组
        可以使用 Enum 的 __new__ 方法来自定义枚举成员的创建过程。 
        __value: 私有变量
        __value__: 双下划线前后缀通常用于定义Python的特殊方法（也称为魔术方法）。这些方法有特定的用途，例如 __init__ 用于初始化对象，__str__ 用于定义对象的字符串表示等。
        _value_: 双下划线前后缀通常用于避免与Python的特殊方法或内置函数命名冲突。这种命名方式并不常见，通常是为了避免与Python的保留字或特殊方法名冲突。
        _value:单个下划线前缀通常用于表示一个变量是“内部使用”的。虽然Python没有真正的私有变量，但这种命名约定告诉其他开发者这个变量不应该被直接访问。
    """
    def __new__(cls,code,message):
        obj = object.__new__(cls)
        obj._value_ = code
        obj.message = message
        return obj

    @property
    def get_message(self):
        return self.message





##############################OperatorTypeEnum##############################
import logging
from enum import Enum


"""
操作类别（0其它 1后台用户 2手机端用户） other,backend,mobile
"""
from enum import Enum

class OperatorTypeEnum(Enum):
    # 元组
    OPERATOR_TYPE_OTHER = (0, "其它")
    OPERATOR_TYPE_BACKEND = (1, "后台用户")
    OPERATOR_TYPE_MOBILE = (2, "手机端用户")

    # def __init__(self, code, value):
    #     self.code = code
    #     self.message = value
    #     logging.info("执行OperatorTypeEnum 初始化 code %s,value %s================"%(self.code,self.value))




    """
    cls:表示类的本身（以便在类方法中访问枚举类的成员变量。）
    self:表示实例
    """
    @classmethod
    def get_value_by_id(cls,code):
        for operator in cls:
            if operator.value[0] == code:
                return operator.value[1]
        return None




##############################ResponseCodeEnum##############################
from enum import Enum

class ResponseCodeEnum(Enum):
    SUCCESS = (200, "操作成功！")
    PARAMS_ERROR = (400, "参数解析失败,请核对参数！")
    UNAUTHORIZED = (401, "未认证（签名错误）")
    FORBIDDEN = (402, "请求错误")  # 返回失败业务公共code
    MEDIA_TYPE_ERROR = (403, "不支持的媒体异常,请核对contentType！")
    URL_REQ_NULL = (404, "请求路径不存在")
    METHOD_ERROR = (405, "不支持当前请求方法,请核对请求方法！")
    INTERNAL_SERVER_ERROR = (500, "服务器内部错误！")  # 系统异常公共code
    NULL_POINTER_ERROR = (600, "请核对必填字段是否为空！")
    NUMBER_FORMAT_ERROR = (601, "数据类型不一致！")
    PARAMS_TYPE_ERROR = (602, "参数类型错误！")
    TIMEOUT_ERROR = (603, "token失效连接超时！")
    TIMEOUT_EXPIRE_ERROR = (604, "token登录过期！")
    TOKEN_ILLEGAL = (605, "非法token！")

    USER_LOGIN_FAIL = (1001,"用户登录失败!")

    def __init__(self, code, message):
        self.code = code
        self.message = message

    #@property 是 Python 中用于将类的方法转换为属性访问的装饰器。
    # 使用 @property 装饰器，你可以像访问属性一样访问方法，而不需要调用它
    @property
    def status_code(self):
        return self.code

    @property
    def error_message(self):
        return self.message

#<class 'enum.EnumType'> 枚举类
# print(type(ResponseCodeEnum))
#<enum 'ResponseCodeEnum'> SUCCESS 是 ResponseCodeEnum 枚举类的一个实例。
# print(type(ResponseCodeEnum.SUCCESS))





##############################BusinessException##############################

class BusinessException(Exception):
   def __init__(self,message,code):
       self.message = message
       self.code = code




##############################CommonResult##############################
from typing import Any, Optional

from operation.common.enum.ResponeCodeEnum import ResponseCodeEnum


class CommonResult:

    """
    res: ResponseCodeEnum 这个定义表示 res 参数的类型是 ResponseCodeEnum，
    即 res 必须是 ResponseCodeEnum 的枚举值之一。这种定义方式有助于提高代码的类型安全性和可读性。
    """
    def __init__(self, res: ResponseCodeEnum, data: Any, pagination: Optional[dict] = None):
        self.ResponseCodeEnum = ResponseCodeEnum
        self.data = data
        self.pagination = pagination


    """
      表态方法定义 直接通过 CommonResult.success  类名.静态方法名
      @staticmethod 不能访问或修改类或实例的属性。
    """
    @staticmethod
    def success_pagination(data: Any, pagination: Optional[dict] = None):
        return {
            'code': ResponseCodeEnum.SUCCESS.status_code,
            'message': ResponseCodeEnum.SUCCESS.message,
            'data': data,  # 将 QuerySet 序列化为 JSON,
            'pagination': pagination
        }

    @staticmethod
    def error(code,message):
        return {
            'code': code,
            'message': message,
            'data': None,  # 将 QuerySet 序列化为 JSON,
            'pagination': None
        }

    @staticmethod
    def success_data(data: Any):
        return {
            'code': ResponseCodeEnum.SUCCESS.status_code,
            'message': ResponseCodeEnum.SUCCESS.message,
            'data': data,  # 将 QuerySet 序列化为 JSON,
        }





##############################PageUtils##############################

from django.core.paginator import Paginator, EmptyPage, PageNotAnInteger


def paginate_queryset(queryset, page, page_size):
    """
    分页封装函数
    :param queryset: 查询集
    :param page: 页码
    :param page_size: 每页记录数
    :return: 分页后的数据和分页信息
    """
    paginator = Paginator(queryset, page_size)


    try:
        page_obj = paginator.page(page)
    except PageNotAnInteger:
        page_obj = paginator.page(1)
    except EmptyPage:
        page_obj = paginator.page(paginator.num_pages)

    pagination_info = {
        'total_pages': paginator.num_pages,
        'current_page': page_obj.number,
        'has_next': page_obj.has_next(),
        'has_previous': page_obj.has_previous(),
        'next_page_number': page_obj.next_page_number() if page_obj.has_next() else None,
        'previous_page_number': page_obj.previous_page_number() if page_obj.has_previous() else None,
        'total': paginator.count
    }

    return page_obj.object_list, pagination_info



##############################Serializer##############################

# db_operations/serializers.py
from rest_framework import serializers


class SQLExecutionSerializer(serializers.Serializer):
    sql = serializers.CharField()

四、 settings.py配置

#数据库 连接配置 mysql
DATABASES = {
    'default': {
        # 数据库引擎
        'ENGINE': 'django.db.backends.mysql',
        # 'ENGINE': 'sqlalchemy.create_engine',
        # 数据库名字
        'NAME': 'xxx',
        # 数据库用户名
        'USER': 'xx',
        # 数据库密码
        'PASSWORD': 'xx',
        # 数据库主机地址
        'HOST': 'xxx.xxx.xxx.xxx',
        # 数据库端口号
        'PORT': 'xxx'
    }
}


LOGGING = {
    'version': 1,
    'disable_existing_loggers': False,
    'handlers': {
        'console': {
            'class': 'logging.StreamHandler',
        },
    },
    'root': {
        'handlers': ['console'],
        'level': 'INFO',
    },
    'loggers': {
        'django': {
            'handlers': ['console'],
            'level': 'INFO',
            'propagate': False,
        },
    },
}



INSTALLED_APPS = [
    'django.contrib.admin',
    'django.contrib.auth',
    'django.contrib.contenttypes',
    'django.contrib.sessions',
    'django.contrib.messages',
    'django.contrib.staticfiles',
    'log',
    'monitor',
    'user',
    'dbOperations'
]

# 告警 邮箱配置  需要开通 smtp 权限 在qq邮箱中 配置
EMAIL_BACKEND = 'django.core.mail.backends.smtp.EmailBackend'
EMAIL_HOST = 'smtp.qq.com'  # QQ邮箱的SMTP服务器
EMAIL_PORT = 465  # QQ邮箱的SMTP端口
EMAIL_USE_SSL = True  # 使用SSL加密
EMAIL_HOST_USER = 'xx'  # 你的QQ邮箱
EMAIL_HOST_PASSWORD = 'xx'  # 你的QQ邮箱密码或授权码
DEFAULT_FROM_EMAIL = EMAIL_HOST_USER


# RabbitMQ 配置
RABBITMQ_CONFIG = {
    'host': 'xx.xx.xx.xx',
    'port': xx,
    'virtual_host': '/',
    'user': 'xx',
    'password': 'xx',
}

五、创建和应用迁移


#创建数据库迁移文件并应用
python manage.py makemigrations
python manage.py migrate

六、注册前端请求路由

from django.contrib import admin
from django.urls import path

from log import views as log_views
from monitor import views as monitor_views
from user import views as user_views
from dbOperations import views as db_views

"""

说明:
    这个路径将 /admin/ 开头的 URL 映射到 Django 自带的管理后台。
    admin.site.urls 是 Django 管理后台的 URL 配置，包含了管理后台的所有功能和页面。
    
    这个路径将 /log/ 开头的 URL 映射到 log 应用中的 getLogList 视图函数。
    name='log' 为这个 URL 路径定义了一个名称，可以在模板或其他地方通过这个名称来引用这个 URL。
"""
urlpatterns = [
    path('admin/', admin.site.urls),
    path('log/getLogList', log_views.getLogList, name='log_list'),
    path('log/getDebugLogList', log_views.getDebugLogList,name='debug_log_list'),
    path('monitor/getSystemInfo', monitor_views.getSystemInfo,name='system_info'),
    path('monitor/getAlarmList', monitor_views.getAlarmList, name='alarm_list'),
    path('user/login',user_views.login, name='login'),
    path('dbOperations/executeSQLView', db_views.executeSQLView,name='execute_sql_view')
]

七、启动项目

#打开终端 cd 到根目录 
python manage.py runserver

八、效果

#启动 前端 项目
npm run dev




#==========================前端部分代码  alarmPage.vue==========================

<template>
  <div class="app-container">
    <el-card shadow="always">
      <el-form ref="searchForm" :inline="true" :model="searchMap" style="margin-top: 20px">
        <el-form-item>
          <el-button type="primary" icon="el-icon-search" @click="searchLog('searchForm')">搜索</el-button>
          <el-button type="primary" icon="el-icon-clear" @click="resetForm('searchForm')">重置</el-button>
        </el-form-item>
      </el-form>
    </el-card>

    <el-card shadow="always">
      <div>
        <el-table ref="multipleTable" v-loading="listLoading" :data="alarmListDto" border fit highlight-current-row style="width: 100%;" class="tb-edit">
          <el-table-column label="操作ID" prop="id" width="180px" align="center" />
          <el-table-column label="事件类型" prop="event_type" width="380px" align="center" />
          <el-table-column label="事件详情" prop="event_details" width="380px" align="center" />
          <!-- <el-table-column label="是否已解决" prop="is_resolved" width="180px" align="center" /> -->
          <el-table-column label="触发时间" prop="event_time" width="180px" align="center" />
        </el-table>
      </div>

      <div class="block">
        <el-pagination :current-page="currentPage" :page-sizes="[5, 10, 15, 20]" :page-size="5" layout="total, sizes, prev, pager, next, jumper" :total="total" @size-change="handleSizeChange" @current-change="handleCurrentChange" />
      </div>
    </el-card>

  </div>
</template>

<script>
  import {
    getAlarmList
  } from '@/api/monitors/monitors-request'

  export default {
    data() {
      return {
        total: 0,
        currentPage: 1,
        searchMap: {},
        listLoading: true,
        params: {
          page: 1, // 当前页码
          page_size: 5 // 每页显示数目
        },
        alarmListDto: [],
        error: ''
      }
    },
    mounted() {
      this.getAlarmList()
    },
    methods: {
      handleSizeChange(val) {
        console.log(`每页 ${val} 条`)
        this.params.page_size = val
        this.getAlarmList()
      },
      handleCurrentChange(val) {
        console.log(`当前页: ${val}`)
        this.params.page = val
        this.getAlarmList()
      },
      // 重置功能,element ui 提供的功能
      resetForm(formName) {
        console.log(this.$refs[formName].resetFields)
        this.$refs[formName].resetFields()
        this.getAlarmList()
      },
      searchLog(formName) {
        console.log(this.searchMap)
        this.getAlarmList()
      },
      getAlarmList() {
        this.dataLoading = true
        console.log('请求参数:' + this.params)
        getAlarmList(this.params).then((res) => {
          console.log('响应:', res.data.data)
          alert(JSON.stringify(res.data.data))
          this.alarmListDto = res.data.data
          this.total = res.data.pagination.total

          setTimeout(() => { // 超过指定超时时间  关闭查询的转圈的loading加载动画
            this.listLoading = false
          }, 1.5 * 1000)
        })
      }
    }
  }
</script>

<style>
</style>