移位寄存器是一个触发器链，允许数据在固定（静态）数字上传播延迟阶段。相反，在动态移位寄存器中，传播链的长度在电路操作期间动态变化。从“coding”下载编码示例文件示例。
静态移位寄存器元件
静态移位寄存器通常包括：
•时钟
•可选时钟启用
•串行数据输入
•串行数据输出
基于移位寄存器SRL的实现
Vivado合成在SRL类型资源上实现推断的移位寄存器，例如：
•SRL16E
•SRLC32E
根据移位寄存器的长度，Vivado合成会执行以下操作之一：
•在单个SRL类型基元上实现
•利用SRLC类型原语的级联功能
•如果设计的其余部分使用了一些移位寄存器的中间位置
移位寄存器编码示例
以下部分提供移位寄存器的VHDL和Verilog编码示例。32位移位寄存器编码示例一（VHDL）此编码示例使用串联编码样式。
Filename: shift_registers_0.vhd
-- 32-bit Shift Register
-- Rising edge clock
-- Active high clock enable
-- Concatenation-based template
-- File: shift_registers_0.vhd
library ieee;
use ieee.std_logic_1164.all;
entity shift_registers_0 is
generic(
DEPTH : integer := 32
);
port(
clk : in std_logic;
clken : in std_logic;
SI : in std_logic;
SO : out std_logic
);
end shift_registers_0;
architecture archi of shift_registers_0 is
signal shreg : std_logic_vector(DEPTH - 1 downto 0);
begin
process(clk)
begin
if rising_edge(clk) then
if clken = '1' then
shreg <= shreg(DEPTH - 2 downto 0) & SI;
end if;
end if;
end process;
SO <= shreg(DEPTH - 1);
end archi;
32-Bit Shift Register Coding Example Two (VHDL)
The same functionality can also be described as follows:
Filename: shift_registers_1.vhd
-- 32-bit Shift Register
-- Rising edge clock
-- Active high clock enable
-- foor loop-based template
-- File: shift_registers_1.vhd
library ieee;
use ieee.std_logic_1164.all;
entity shift_registers_1 is
generic(
DEPTH : integer := 32
);
port(
clk : in std_logic;
clken : in std_logic;
SI : in std_logic;
SO : out std_logic
);
end shift_registers_1;
architecture archi of shift_registers_1 is
signal shreg : std_logic_vector(DEPTH - 1 downto 0);
begin
process(clk)
begin
if rising_edge(clk) then
if clken = '1' then
for i in 0 to DEPTH - 2 loop
shreg(i + 1) <= shreg(i);
end loop;
shreg(0) <= SI;
end if;
end if;
end process;
SO <= shreg(DEPTH - 1);
end archi;
8-Bit Shift Register Coding Example One (Verilog)
This coding example uses a concatenation to describe the Register chain.
Filename: shift_registers_0.v
// 8-bit Shift Register
// Rising edge clock
// Active high clock enable
// Concatenation-based template
// File: shift_registers_0.v
module shift_registers_0 (clk, clken, SI, SO);
parameter WIDTH = 32;
input clk, clken, SI;
output SO;
reg [WIDTH-1:0] shreg;
always @(posedge clk)
begin
if (clken)
shreg = {shreg[WIDTH-2:0], SI};
end
assign SO = shreg[WIDTH-1];
endmodule
32-Bit Shift Register Coding Example Two (Verilog)
Filename: shift_registers_1.v
// 32-bit Shift Register
// Rising edge clock
// Active high clock enable
// For-loop based template
// File: shift_registers_1.v
module shift_registers_1 (clk, clken, SI, SO);
parameter WIDTH = 32;
input clk, clken, SI;
output SO;
reg [WIDTH-1:0] shreg;
integer i;
always @(posedge clk)
begin
if (clken)
begin
for (i = 0; i < WIDTH-1; i = i+1)
shreg[i+1] <= shreg[i];
shreg[0] <= SI;
end
end
assign SO = shreg[WIDTH-1];
endmodule
SRL Based Shift Registers Reporting
Report Cell Usage:
-----+-------+-----
|Cell |Count
-----+-------+-----
1 |SRLC32E| 1
动态移位寄存器是一种移位寄存器，其长度可以在电路中动态变化活动
动态移位寄存器可以看作：
•电路操作过程中可接受的最大长度的触发器链。
•多路复用器，在给定的时钟周期内选择要提取数据的阶段来自传播链。
Vivado合成工具可以推断任何最大长度的动态移位寄存器。
Vivado合成工具可以使用SRL类型最佳地实现动态移位寄存器设备族中可用的基元。下图说明了的功能动态移位寄存器。
Dynamic Shift Registers Coding Examples
Download the coding example files from
Coding Examples
.
32-Bit Dynamic Shift Registers Coding Verilog Example
Filename: dynamic_shift_registers_1.v
// 32-bit dynamic shift register.
// Download:
// File: dynamic_shift_registers_1.v
module dynamic_shift_register_1 (CLK, CE, SEL, SI, DO);
parameter SELWIDTH = 5;
input CLK, CE, SI;
input [SELWIDTH-1:0] SEL;
output DO;
localparam DATAWIDTH = 2**SELWIDTH;
reg [DATAWIDTH-1:0] data;
assign DO = data[SEL];
always @(posedge CLK)
begin
if (CE == 1'b1)
data <= {data[DATAWIDTH-2:0], SI};
end
endmodule
32-Bit Dynamic Shift Registers Coding VHDL Example
Filename: dynamic_shift_registers_1.vd
-- 32-bit dynamic shift register.
-- File:dynamic_shift_registers_1.vhd
-- 32-bit dynamic shift register.
library IEEE;
use IEEE.std_logic_1164.all;
use IEEE.std_logic_unsigned.all;
entity dynamic_shift_register_1 is
generic(
DEPTH : integer := 32;
SEL_WIDTH : integer := 5
);
port(
CLK : in std_logic;
SI : in std_logic;
CE : in std_logic;
A : in std_logic_vector(SEL_WIDTH - 1 downto 0);
DO : out std_logic
);
end dynamic_shift_register_1;
architecture rtl of dynamic_shift_register_1 is
type SRL_ARRAY is array (DEPTH - 1 downto 0) of std_logic;
signal SRL_SIG : SRL_ARRAY;
begin
process(CLK)
begin
if rising_edge(CLK) then
if CE = '1' then
SRL_SIG <= SRL_SIG(DEPTH - 2 downto 0) & SI;
end if;
end if;
end process;
DO <= SRL_SIG(conv_integer(A));
end rtl;
