网络应用基础交换机的基础操作（NETBASE第六课）

news2024/11/14 16:18:05

网络应用基础交换机的基础操作（NETBASE第六课）

1 回顾代码实操 主题背景的转换 字体设置 背景的设置

第一点 在操作ENSP个人建议要关闭防火墙

 

 第二点 在操作ENSP软件是观察下面的软件是否全部关闭了

 第三点 打开软件 ENSP软件注册信息 操作如下

 

 

    注册前请先删除设备！
    删除 AR_Base_Link......成功
    删除 AR_Base......成功
    拷贝 AR_Base......成功
    增加 AR_Base......成功
    增加 AR_Base_Link......成功
    注册成功


    删除 WLAN_AC_Base_Link......成功
    删除 WLAN_AC_Base......成功
    拷贝 WLAN_AC_Base......成功
    增加 WLAN_AC_Base......成功
    增加 WLAN_AC_Base_Link......成功
    注册成功


    删除 WLAN_AP_Base_Link......成功
    删除 WLAN_AP_Base......成功
    拷贝 WLAN_AP_Base......成功
    增加 WLAN_AP_Base......成功
    增加 WLAN_AP_Base_Link......成功
    注册成功


    删除 WLAN_AD_Base_Link......成功
    删除 WLAN_AD_Base......成功
    拷贝 WLAN_AD_Base......成功
    增加 WLAN_AD_Base......成功
    增加 WLAN_AD_Base_Link......成功
    注册成功


    删除 WLAN_SAP_Base_Link......成功
    删除 WLAN_SAP_Base......成功
    拷贝 WLAN_SAP_Base......成功
    增加 WLAN_SAP_Base......成功
    增加 WLAN_SAP_Base_Link......成功
    注册成功

第四点测试软件

 

 

 

第五点 改背景

 第六点详细的介绍设置命令中用户能改什么内容

 

 

 

 

 第七点 用户使用的交换机 PC机的页面设置中的选项

 

 

 

路由器的设置

 

交换机的设置

 

PC机的内容

 

 

 

 

 实操

代码命令一

domain default_admin
 local-user admin password simple admin
 local-user admin service-type http
#
interface Vlanif1
#
interface MEth0/0/1
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface GigabitEthernet0/0/3
#
interface GigabitEthernet0/0/4
#
interface GigabitEthernet0/0/5
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
#
interface NULL0
#
ospf 1
#
user-interface con 0
user-interface vty 0 4
#
return

<Huawei>
<Huawei>
<Huawei>
Jul  9 2023 11:16:07-08:00 Huawei %%01PHY/1/PHY(l)[0]:    GigabitEthernet0/0/1: 
change status to down
Jul  9 2023 11:16:08-08:00 Huawei %%01PHY/1/PHY(l)[1]:    GigabitEthernet0/0/1: 
change status to up
<Huawei>dis	
<Huawei>display  this	
<Huawei>display  this 
#
return
<Huawei>
<Huawei>dis	
<Huawei>display ver	
<Huawei>display version 
Huawei Versatile Routing Platform Software
VRP (R) software, Version 5.110 (S5700 V200R001C00)
Copyright (c) 2000-2011 HUAWEI TECH CO., LTD

Quidway S5700-28C-HI Routing Switch uptime is 0 week, 0 day, 0 hour, 8 minutes
<Huawei>
<Huawei>sys	
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys	
[Huawei]sysname s1	
[Huawei]sysname s1
[s1]
Jul  9 2023 11:17:54-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 5, the ch
ange loop count is 0, and the maximum number of records is 4095.
[s1]
[s1]use	
[s1]user-i	
[s1]user-interface  co	
[s1]user-interface  console 0	
[s1]user-interface  console 0
[s1-ui-console0] aus	
[s1-ui-console0] aut	
[s1-ui-console0]authentication-mode pa	
[s1-ui-console0]authentication-mode password  123
                                              ^
Error:Too many parameters found at '^' position.
[s1-ui-console0]aut	
[s1-ui-console0]authentication-mode pa	
[s1-ui-console0]authentication-mode password  123456
                                              ^
Error:Too many parameters found at '^' position.
[s1-ui-console0]set aut	
[s1-ui-console0]set authentication p	
[s1-ui-console0]set authentication password 123456
                                            ^
Error: Unrecognized command found at '^' position.
[s1-ui-console0]
[s1-ui-console0]set	
[s1-ui-console0]set  aut	
[s1-ui-console0]set  authentication  p	
[s1-ui-console0]set  authentication  password  c	
[s1-ui-console0]set  authentication  password  cipher  123
[s1-ui-console0]
Jul  9 2023 11:21:54-08:00 s1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25.
191.3.1 configurations have been changed. The current change number is 6, the ch
ange loop count is 0, and the maximum number of records is 4095.
[s1-ui-console0]
[s1-ui-console0]
[s1-ui-console0]
<s1>
<s1>dis	
<s1>display  curr	
<s1>display  current-configuration 
#
sysname s1
#
cluster enable
ntdp enable
ndp enable
#
drop illegal-mac alarm
#
diffserv domain default
#
drop-profile default
#
aaa
 authentication-scheme default
 authorization-scheme default
 accounting-scheme default
 domain default
 domain default_admin
 local-user admin password simple admin
 local-user admin service-type http
#
interface Vlanif1
#
interface MEth0/0/1
#
interface GigabitEthernet0/0/1
#
interface GigabitEthernet0/0/2
#
interface GigabitEthernet0/0/3
#
interface GigabitEthernet0/0/4
#
interface GigabitEthernet0/0/5
#
interface GigabitEthernet0/0/6
#
interface GigabitEthernet0/0/7
#
interface GigabitEthernet0/0/8
#
interface GigabitEthernet0/0/9
#
interface GigabitEthernet0/0/10
#
interface GigabitEthernet0/0/11
#
interface GigabitEthernet0/0/12
#
interface GigabitEthernet0/0/13
#
interface GigabitEthernet0/0/14
#
interface GigabitEthernet0/0/15
#
interface GigabitEthernet0/0/16
#
interface GigabitEthernet0/0/17
#
interface GigabitEthernet0/0/18
#
interface GigabitEthernet0/0/19
#
interface GigabitEthernet0/0/20
#
interface GigabitEthernet0/0/21
#
interface GigabitEthernet0/0/22
#
interface GigabitEthernet0/0/23
#
interface GigabitEthernet0/0/24
#
interface NULL0
#
ospf 1
#
user-interface con 0
 set authentication password cipher k6ls=miVdW`S/0Rb{DzNE&d#
user-interface vty 0 4
#
return

<s1>
<s1>
Jul  9 2023 11:22:43-08:00 s1 %%01PHY/1/PHY(l)[2]:    GigabitEthernet0/0/2: chan
ge status to down
Jul  9 2023 11:22:44-08:00 s1 %%01PHY/1/PHY(l)[3]:    GigabitEthernet0/0/2: chan
ge status to up

代码命令二

he device is running!
##########################################################################
<Huawei>
<Huawei>
<Huawei>

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>
<Huawei>lbyuo
        ^
Error: Unrecognized command found at '^' position.
<Huawei>luyou
        ^
Error: Unrecognized command found at '^' position.
<Huawei>
<Huawei>
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]user	
[Huawei]user	
[Huawei]user-i	
[Huawei]user-interface co	
[Huawei]user-interface console 0	
[Huawei]user-interface console 0
[Huawei-ui-console0]au	
[Huawei-ui-console0]authentication-mode p	
[Huawei-ui-console0]authentication-mode password 
Please configure the login password (maximum length 16):
Please configure the login password (maximum length 16):123456
[Huawei-ui-console0]
[Huawei-ui-console0]quit	
[Huawei-ui-console0]quit 
[Huawei]
<Huawei>quit

  Configuration console exit, please press any key to log on


Login authentication


Password:
Password:
Password:

  Configuration console exit, please press any key to log on


Login authentication


Password:
Password:
<Huawei>sys	
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]use	
[Huawei]user-i	
[Huawei]user-interface  co	
[Huawei]user-interface  console 0
[Huawei-ui-console0]aut	
[Huawei-ui-console0]authentication-mode p
Please configure the login password (maximum length 16):
Please configure the login password (maximum length 16):
Please configure the login password (maximum length 16):
Error: Failed to set user interface authentication mode because of invalid passw
ord.
[Huawei-ui-console0]un	
[Huawei-ui-console0]undo au	
[Huawei-ui-console0]undo authentication-mode p	
[Huawei-ui-console0]undo authentication-mode pa	
[Huawei-ui-console0]undo authentication-mode password	
[Huawei-ui-console0]undo authentication-mode password
                                             ^
Error:Too many parameters found at '^' position.
[Huawei-ui-console0]
[Huawei-ui-console0]
[Huawei-ui-console0]un	
[Huawei-ui-console0]undo au	
[Huawei-ui-console0]undo authentication-mode
[Huawei-ui-console0]
<Huawei>quit	
<Huawei>quit 

  Configuration console exit, please press any key to log on

<Huawei>sys	
<Huawei>system-view 
Enter system view, return user view with Ctrl+Z.
[Huawei]
[Huawei]
[Huawei]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>
<Huawei>
<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]us	
[Huawei]user-i	
[Huawei]user-interface c	
[Huawei]user-interface console 0	
[Huawei]user-interface console 0
[Huawei-ui-console0]au	
[Huawei-ui-console0]aut	
[Huawei-ui-console0]authentication-mode pa	
[Huawei-ui-console0]authentication-mode password 
Please configure the login password (maximum length 16):123456
[Huawei-ui-console0]dis	
[Huawei-ui-console0]display  this	
[Huawei-ui-console0]display  this 
[V200R003C00]
#
user-interface con 0
 authentication-mode password
 set authentication password cipher %$%$)8fK/mpepPtyli;*4h,N,%&{kaB`';!EJS$t7hGK
/)5/%&!,%$%$
user-interface vty 0 4
user-interface vty 16 20
#
return
[Huawei-ui-console0]
[Huawei-ui-console0]set au	
[Huawei-ui-console0]set authentication  p	
[Huawei-ui-console0]set authentication  password  ci	
[Huawei-ui-console0]set authentication  password  cipher  abc
[Huawei-ui-console0]dis	
[Huawei-ui-console0]display this	
[Huawei-ui-console0]display this 
[V200R003C00]
#
user-interface con 0
 authentication-mode password
 set authentication password cipher %$%$v\{;~(jl>:9KK,@r*9!&,%6gy+_<RJL&R5u-/sX:
e%$.%6j,%$%$
user-interface vty 0 4
user-interface vty 16 20
#
return
[Huawei-ui-console0]
<Huawei>
<Huawei>quit	
<Huawei>quit 

  Configuration console exit, please press any key to log on


Login authentication


Password:
Password:
Password:

  Configuration console exit, please press any key to log on


Login authentication


Password:
<Huawei>

代码三

Huawei>
<Huawei>sys  //  一 主视图进入到系统视图sys+tab键
Enter system view, return user view with Ctrl+Z. 
[Huawei]sysname  swith1 //二 修改系统视图的名字为swith1
[swith1] //三 按住ctrl键+键返回上一步
<swith1>save //四   
The current configuration will be written to the device.
Are you sure to continue?[Y/N]
Jul  9 2023 16:26:44-08:00 swith1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 4, th
e change loop count is 0, and the maximum number of records is 4095.
Error: Please choose 'YES' or 'NO' first before pressing 'Enter'. [Y/N]:y
Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]:
Jul  9 2023 16:26:54-08:00 swith1 %%01CFM/4/SAVE(l)[54]:The user chose Y when de
ciding whether to save the configuration to the device.
flash:/vrpcfg.zip exists, overwrite?[Y/N]:y
Now saving the current configuration to the slot 0.
Jul  9 2023 16:26:59-08:00 swith1 %%01CFM/4/OVERWRITE_FILE(l)[55]:When deciding 
whether to overwrite the configuration file vrpcfg.zip, the user chose Y.
Save the configuration successfully.
<swith1>
<swith1>reset  saved-configuration  //倒数第四步 是否恢复出厂设置
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:y
Warning: Now clearing the configuration in the device.
Jul  9 2023 16:27:16-08:00 swith1 %%01CFM/4/RST_CFG(l)[56]:The user chose Y when
 deciding whether to reset the saved configuration.
Info: Succeeded in clearing the configuration in the device.
<swith1>reboot   //倒数 第三步 重启终端设备名字为SWith1
Info: The system is now comparing the configuration, please wait.
Warning: All the configuration will be saved to the configuration file for the n
ext startup:, Continue?[Y/N]:n //倒数第二步 输入N 不保存操作
Info: If want to reboot with saving diagnostic information, input 'N' and then e
xecute 'reboot save diagnostic-information'.
System will reboot! Continue?[Y/N]:y  //最后一步 输入 Y 重启
Jul  9 2023 16:27:35-08:00 swith1 %%01CMD/4/REBOOT(l)[57]:The user chose Y when 
deciding whether to reboot the system. (Task=co0, Ip=**, User=**)
<swith1>
Jul  9 2023 16:27:35-08:00 swith1 %%01IFNET/4/BOARD_DISABLE(l)[58]:Board 0 has b
een unavailable.
Jul  9 2023 16:27:35-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[59]:Interface Gigabi
tEthernet0/0/1 has been unavailable.
Jul  9 2023 16:27:35-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[60]:Interface Gigabi
tEthernet0/0/2 has been unavailable.
Jul  9 2023 16:27:35-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[61]:Interface Gigabi
tEthernet0/0/3 has been unavailable.
Jul  9 2023 16:27:35-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[62]:Interface Gigabi
tEthernet0/0/4 has been unavailable.
Jul  9 2023 16:27:36-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[63]:Interface Gigabi
tEthernet0/0/5 has been unavailable.
Jul  9 2023 16:27:36-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[64]:Interface Gigabi
tEthernet0/0/6 has been unavailable.
Jul  9 2023 16:27:36-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[65]:Interface Gigabi
tEthernet0/0/7 has been unavailable.
Jul  9 2023 16:27:36-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[66]:Interface Gigabi
tEthernet0/0/8 has been unavailable.
Jul  9 2023 16:27:36-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[67]:Interface Gigabi
tEthernet0/0/9 has been unavailable.
Jul  9 2023 16:27:36-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[68]:Interface Gigabi
tEthernet0/0/10 has been unavailable.
Jul  9 2023 16:27:36-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[69]:Interface Gigabi
tEthernet0/0/11 has been unavailable.
Jul  9 2023 16:27:36-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[70]:Interface Gigabi
tEthernet0/0/12 has been unavailable.
Jul  9 2023 16:27:36-08:00 swith1 %%01IFNET/4/IF_DISABLE(l)[71]:Interface Gigabi
tEthernet0/0/13 has been unavailable.##################
<Huawei>

代码四

Huawei>
<Huawei>sys  //  一 主视图进入到系统视图sys+tab键
Enter system view, return user view with Ctrl+Z. 
[Huawei]sysname  <DREAMS> //二 修改系统视图的名字为swith1
<DREAMS> //三 按住ctrl键+键返回上一步
<DREAMS> save //四   
The current configuration will be written to the device.
Are you sure to continue?[Y/N]
Jul  9 2023 16:26:44-08:00 swith1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 4, th
e change loop count is 0, and the maximum number of records is 4095.
Error: Please choose 'YES' or 'NO' first before pressing 'Enter'. [Y/N]:y
Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]:
Jul  9 2023 16:26:54-08:00 swith1 %%01CFM/4/SAVE(l)[54]:The user chose Y when de
ciding whether to save the configuration to the device.
flash:/vrpcfg.zip exists, overwrite?[Y/N]:y
Now saving the current configuration to the slot 0.
Jul  9 2023 16:26:59-08:00 swith1 %%01CFM/4/OVERWRITE_FILE(l)[55]:When deciding 
whether to overwrite the configuration file vrpcfg.zip, the user chose Y.
Save the configuration successfully.
<DREAMS>
<DREAMS>
<DREAMS>
<DREAMS>
<DREAMS>rese	
<DREAMS>reset  sa	
<DREAMS>reset  saved-configuration 
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:y
Warning: Now clearing the configuration in the device.
Jul  9 2023 16:46:49-08:00 DREAMS %%01CFM/4/RST_CFG(l)[54]:The user chose Y when
 deciding whether to reset the saved configuration.
Info: Succeeded in clearing the configuration in the device.
<DREAMS>reboot
Info: The system is now comparing the configuration, please wait.
Warning: All the configuration will be saved to the configuration file for the n
ext startup:, Continue?[Y/N]:n
Info: If want to reboot with saving diagnostic information, input 'N' and then e
xecute 'reboot save diagnostic-information'.
System will reboot! Continue?[Y/N]:y
Jul  9 2023 16:47:01-08:00 DREAMS %%01CMD/4/REBOOT(l)[55]:The user chose Y when 
deciding whether to reboot the system. (Task=co0, Ip=**, User=**)
<DREAMS>
Jul  9 2023 16:47:01-08:00 DREAMS %%01IFNET/4/BOARD_DISABLE(l)[56]:Board 0 has b
een unavailable.
Jul  9 2023 16:47:01-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[57]:Interface Gigabi
tEthernet0/0/1 has been unavailable.
Jul  9 2023 16:47:01-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[58]:Interface Gigabi
tEthernet0/0/2 has been unavailable.
Jul  9 2023 16:47:01-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[59]:Interface Gigabi
tEthernet0/0/3 has been unavailable.
Jul  9 2023 16:47:01-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[60]:Interface Gigabi
tEthernet0/0/4 has been unavailable.
Jul  9 2023 16:47:01-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[61]:Interface Gigabi
tEthernet0/0/5 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[62]:Interface Gigabi
tEthernet0/0/6 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[63]:Interface Gigabi
tEthernet0/0/7 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[64]:Interface Gigabi
tEthernet0/0/8 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[65]:Interface Gigabi
tEthernet0/0/9 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[66]:Interface Gigabi
tEthernet0/0/10 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[67]:Interface Gigabi
tEthernet0/0/11 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[68]:Interface Gigabi
tEthernet0/0/12 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[69]:Interface Gigabi
tEthernet0/0/13 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[70]:Interface Gigabi
tEthernet0/0/14 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[71]:Interface Gigabi
tEthernet0/0/15 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[72]:Interface Gigabi
tEthernet0/0/16 has been unavailable.
Jul  9 2023 16:47:02-08:00 DREAMS %%01IFNET/4/IF_DISABLE(l)[73]:Interface Gigabi
tEthernet0/0/17 has been unavailable.
<Huawei>
Jul  9 2023 16:47:22-08:00 Huawei %%01ALML/4/PUBLISH_EVENT(l)[0]:Publish event. 
(Slot=0, Event ID=BOARD_SERVICE_REGISTER).
Jul  9 2023 16:47:23-08:00 Huawei %%01IFNET/4/BOARD_ENABLE(l)[1]:Board 0 has bee
n available.
Jul  9 2023 16:47:24-08:00 Huawei %%01SRM/3/FANEXC(l)[2]:Fault occurs in the fan
 in slot 0.
Jul  9 2023 16:47:24-08:00 Huawei %%01HSC/4/SICTMP_EXCD_LWTHR(l)[3]:Temperature 
of SIC in slot 0 exceeds the low threshold.
Jul  9 2023 16:47:25-08:00 Huawei DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5
.25.191.3.1 configurations have been changed. The current change number is 3, th
e change loop count is 0, and the maximum number of records is 4095.
<Huawei>
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[4]:    GigabitEthernet0/0/1: 
change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_STATE(l)[5]:Interface Vlanif1 h
as turned into DOWN state.
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[6]:    GigabitEthernet0/0/2: 
change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[7]:    GigabitEthernet0/0/3: 
change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[8]:    GigabitEthernet0/0/4: 
change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[9]:    GigabitEthernet0/0/5: 
change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[10]:    GigabitEthernet0/0/6:
 change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[11]:    GigabitEthernet0/0/7:
 change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[12]:    GigabitEthernet0/0/8:
 change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[13]:    GigabitEthernet0/0/9:
 change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[14]:    GigabitEthernet0/0/10
: change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[15]:    GigabitEthernet0/0/11
: change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[16]:    GigabitEthernet0/0/12
: change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[17]:    GigabitEthernet0/0/13
: change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[18]:    GigabitEthernet0/0/14
: change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[19]:    GigabitEthernet0/0/15
: change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[20]:    GigabitEthernet0/0/16
: change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01PHY/1/PHY(l)[21]:    GigabitEthernet0/0/17
: change status to down
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/CARD_ENABLE(l)[22]:Board 0 card 0 
has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[23]:Interface Gigabit
Ethernet0/0/1 has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[24]:Interface Gigabit
Ethernet0/0/2 has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[25]:Interface Gigabit
Ethernet0/0/3 has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[26]:Interface Gigabit
Ethernet0/0/4 has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[27]:Interface Gigabit
Ethernet0/0/5 has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[28]:Interface Gigabit
Ethernet0/0/6 has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[29]:Interface Gigabit
Ethernet0/0/7 has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[30]:Interface Gigabit
Ethernet0/0/8 has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[31]:Interface Gigabit
Ethernet0/0/9 has been available.
Jul  9 2023 16:47:28-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[32]:Interface Gigabit
Ethernet0/0/10 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[33]:Interface Gigabit
Ethernet0/0/11 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[34]:Interface Gigabit
Ethernet0/0/12 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[35]:Interface Gigabit
Ethernet0/0/13 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[36]:Interface Gigabit
Ethernet0/0/14 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[37]:Interface Gigabit
Ethernet0/0/15 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[38]:Interface Gigabit
Ethernet0/0/16 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[39]:Interface Gigabit
Ethernet0/0/17 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[40]:Interface Gigabit
Ethernet0/0/18 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[41]:Interface Gigabit
Ethernet0/0/19 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[42]:Interface Gigabit
Ethernet0/0/20 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[43]:Interface Gigabit
Ethernet0/0/21 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[44]:Interface Gigabit
Ethernet0/0/22 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[45]:Interface Gigabit
Ethernet0/0/23 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01IFNET/4/IF_ENABLE(l)[46]:Interface Gigabit
Ethernet0/0/24 has been available.
Jul  9 2023 16:47:29-08:00 Huawei %%01PHY/1/PHY(l)[47]:    GigabitEthernet0/0/18
: change status to down
Jul  9 2023 16:47:29-08:00 Huawei %%01PHY/1/PHY(l)[48]:    GigabitEthernet0/0/19
: change status to down
Jul  9 2023 16:47:29-08:00 Huawei %%01PHY/1/PHY(l)[49]:    GigabitEthernet0/0/20
: change status to down
Jul  9 2023 16:47:29-08:00 Huawei %%01PHY/1/PHY(l)[50]:    GigabitEthernet0/0/21
: change status to down
Jul  9 2023 16:47:29-08:00 Huawei %%01PHY/1/PHY(l)[51]:    GigabitEthernet0/0/22
: change status to down
Jul  9 2023 16:47:29-08:00 Huawei %%01PHY/1/PHY(l)[52]:    GigabitEthernet0/0/23
: change status to down
Jul  9 2023 16:47:29-08:00 Huawei %%01PHY/1/PHY(l)[53]:    GigabitEthernet0/0/24
: change status to down
<Huawei>
<Huawei>
<Huawei>

代码五

<SW1>**reset saved-configuration**   //恢复出厂设置
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:**y **   //是否要恢复出厂设置
..........
Info: Succeeded in clearing the configuration in the device.
<SW1>**reboot**               //重启终端
Warning: All the configuration will be saved to the configuration file for the n
ext startup:, Continue?[Y/N]:**n**      //提示是否保存当前配置，选择是Y/否N
...........
System will reboot! Continue?[Y/N]:**y**   //提示设备是否要重启，选择是Y/否N

**5、辟邪剑谱**

<Huawei>u t m关闭日志提示

<Huawei>dis ver显示版本
<Huawei>dis cu查看当前配置信息
<Huawei>sy进入系统视图
[Huawei]sy S1更改设备名为S1
[S1]int g0/0/1进入接口
[S1-GigabitEthernet0/0/1]sh禁用接口
[S1-GigabitEthernet0/0/1]undo sh启用接口
Ctrl+z返回用户视图
[S1]user-in co 0进入console口
[S1-ui-console0]auth p启用密码认证
[S1-ui-console0]set a p c 123设置密码
[S1-ui-console0]ret返回到用户视图
<S1>sa保存
<S1>quit 
Please Press ENTER.
Login authentication
Password:输入123
[S1]user-in co 0进入console口
[S1-ui-console0]i 1440设置超时时间24小时
<S1>res sa
Warning: The action will delete the saved configuration in the device.
The configuration will be erased to reconfigure. Continue? [Y/N]:y确认恢复

<S1>reboot 
ext startup:, Continue?[Y/N]:n不保存
System will reboot! Continue?[Y/N]:y重启

代码六

 代码七

 

 

实操出真章

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.coloradmin.cn/o/736104.html

如若内容造成侵权/违法违规/事实不符，请联系多彩编程网进行投诉反馈，一经查实，立即删除！

相关文章

Oracle之Scott用户

Oracle之Scott用户

Oracle增删改查&#xff0c;事务与序列 前言 1、解锁scott用户 2、雇员表&#xff08;emp&#xff09; 3、部门表&#xff08;dept&#xff09; 4、工资等级表&#xff08;salgrade&#xff09;了解 5、奖金表&#xff08;bonus&#xff09;了解 1、解锁scott用户 --解锁scot…
阅读更多...
对卷积和全连接之间关系的学习（1*1卷积与全连接层可以互换吗？）

对卷积和全连接之间关系的学习（1*1卷积与全连接层可以互换吗？）

1.对于卷积和全连接 首先我们看一张图&#xff0c;它是一张关于卷积的操作&#xff1a; 然后在看关于全连接的操作&#xff1a; 从上面两张图中可以看出卷积的过程和全连接的过程&#xff0c;我们利用粉色的卷积核在image上进行卷积&#xff0c;进行内积计算得到输出值3&#…
阅读更多...
调用GPU进行深度学习模型训练问题检查总结

调用GPU进行深度学习模型训练问题检查总结

1、电脑是否具有nvidia的GPU显卡。 2、安装的cuda版本是否超过显卡支持的最高版本。 在nvidia设置->帮助->系统信息->组件&#xff0c;可查看。 3、安装的pytorch是否为gpu版&#xff0c;即使在官网中复制的gpu版安装命令&#xff0c;安装得到的也有可能为cpu版。 建…
阅读更多...
【监控系统】监控系统简介以及主流监控框架对比

【监控系统】监控系统简介以及主流监控框架对比

互联网应用中离不开监控系统&#xff0c;那么为什么会有监控系统呢&#xff1f; 互联网公司产品通常是通过软件、网站、App或其他数字化方式提供服务的&#xff0c;这类产品在使用过程中可能会面临一系列风险和挑战。 比如网络故障或稳定性问题&#xff0c;由于网络故障、硬件…
阅读更多...
外设资源共享须知

外设资源共享须知

外设资源共享 具有相同ID的只能使用一个&#xff0c;无法同时使用。 例如当使能了SPIM0&#xff0c; 就不能用TWIM0&#xff0c;因为基地址相同&#xff0c;不能同时使用。此时建议使用TWIM1. 在sdk_config.h 中配置时需留意。
阅读更多...
tecplot360 只显示指定phase的设定体积分数的区域

tecplot360 只显示指定phase的设定体积分数的区域

tecplot360 只显示指定phase的设定体积分数的区域 到数入据抽取切面设定显示体积分数范围 参考1&#xff1a; Tecplot中如何提取水线面&#xff08;自由表面&#xff09;并绘图 参考2&#xff1a; 两相流计算中&#xff0c;如何用Tecplot提取水相断面平均物理量&#xff1f; …
阅读更多...
创建一个django项目详细说明

创建一个django项目详细说明

1.首先安装django pip install django 2.创建django项目 django-admin startproject myproject 输入命令后自动生成相关文件 manage.py文件&#xff1a;这是管理Django项目的重要命令行工具&#xff0c;它主要用于启动项目、创建应用和完成数据库的迁移等。settings.py文件&…
阅读更多...
mongodb集群工作原理学习

mongodb集群工作原理学习

mongodb集群 MongoDB集群有好几种方式:,主从模式,副本集模式和分片的模式 其中主从模式基本不再使用,大多是后面两种 副本集模式 副本集模式主要是用于实现服务的高可用性,类型Redis的哨兵模式. 它主要是的特点: 创建集群后会有主节点(primary)和从节点(secondary). 但从节点…
阅读更多...
1765_Perl实现fileread功能

1765_Perl实现fileread功能

全部学习汇总&#xff1a; GreyZhang/perl_basic: some perl basic learning notes. (github.com) fileread是MATLAB中的一个函数&#xff0c;可以实现对一个文本文件的全文读取。读取后的内容返回给一个字符串量。在Python中也有类似的功能&#xff0c;不过MATLAB中的这个更能…
阅读更多...
快速创建ES集群

快速创建ES集群

win10 中docker 设置 快速创建集群 访问 官网 elasticsearch/docs/reference/setup/install/docker at main elastic/elasticsearch GitHub 负责上面2个文件&#xff0c;并修改&#xff0c;修改如下 .env文件 # Password for the elastic user (at least 6 characters) …
阅读更多...
【私有云】网络虚拟化

【私有云】网络虚拟化

前言 大家好&#xff0c;我是秋意零。 之前一直对 OpenStack 网络很陌生与神奇啊&#xff0c;不知道它是如何实现的&#xff0c;网络结构是怎样的。不过&#xff0c;今天介绍的是网络虚拟化&#xff0c;它在 OpenStack 中及云计算中是非常重要的概念&#xff0c;是理解 OpenS…
阅读更多...
springboot整合websocket遇到的小问题

springboot整合websocket遇到的小问题

今天尝试了通过springboot整合websocket来初步学习使用websocket&#xff0c;然后发现启动的时候报错了&#xff0c;发这篇文章分享一下。 springboot整合websocket的步骤很简单&#xff1a; 第一步&#xff1a;创建一个springboot项目&#xff0c;在这里命名为websocket 在I…
阅读更多...
day16 移除元素

day16 移除元素

题目描述 解题思路&#xff1a; 1.快慢指针&#xff0c;移除数组元素只能是下标操作&#xff1b;fast往前&#xff0c;不等于value的时候&#xff0c;赋给slow&#xff1b; 2.slow&#xff1b;返回的长度直接返回slow&#xff1b; int removeElement(int* nums, int numsSize, …
阅读更多...
Rethinking the Role of Pre-ranking in Large-scale E-Commerce Searching system

Rethinking the Role of Pre-ranking in Large-scale E-Commerce Searching system

来源&#xff1a; KDD’2023Taobao Search 文章目录 ASHASMOL训练样本训练目标蒸馏精排 总结 反思粗排在大规模电商搜索系统中的角色。 由于巨大的数据量以及对系统实时反馈的要求&#xff0c;一个典型的工业排序系统通常由这些模块组成&#xff1a;召回&#xff08;matching&…
阅读更多...
VTR编译问题

VTR编译问题

机器环境 vmware 16.0&#xff1b; ubuntu22.04.02; 问题描述 一、在build过程中会出现一些警告&#xff0c;但没有停止&#xff1b; 二、访问 **raw.githubsercontent.com/…/…**相关网站被拒绝&#xff0c;如下图&#xff1a; 之前在 /etc/hosts 仅仅是添加了raw.github…
阅读更多...
JS数组解构赋值变量存在依赖关系

JS数组解构赋值变量存在依赖关系

题目随便起的&#xff0c; 在刷力扣 41.缺失的第一个正数 这个题的时候&#xff0c;出现了解构赋值的问题&#xff0c; 对于[a,b] [1,2]和[b,a][2,1]按理说都是行的通的&#xff0c;和位置没有关系&#xff0c;本质上都是进行交换 可是当我在题目中 使用[nums[nums[i]-1], nu…
阅读更多...
SpringMVC的高频面试题

SpringMVC的高频面试题

2023最新版&#xff08;持续更新&#xff09; 一、SpringMVC的高频面试题1. SpringMVC的执行流程2. SpringMVC常见的注解有哪些&#xff1f; 一、SpringMVC的高频面试题 1. SpringMVC的执行流程 前置知识 视图阶段&#xff08;JSP&#xff09;: 涉及到的重要组件&#xff1a;…
阅读更多...
KubeSphere 社区双周报 | KubeSphere 多项更新 | 2023.06.23-07.06

KubeSphere 社区双周报 | KubeSphere 多项更新 | 2023.06.23-07.06

KubeSphere 社区双周报主要整理展示新增的贡献者名单和证书、新增的讲师证书以及两周内提交过 commit 的贡献者&#xff0c;并对近期重要的 PR 进行解析&#xff0c;同时还包含了线上/线下活动和布道推广等一系列社区动态。 本次双周报涵盖时间为&#xff1a;2023.06.23-2023.…
阅读更多...
管道设计专业版:Pipedata-Pro Crack

管道设计专业版:Pipedata-Pro Crack

Pipedata-Pro 提高了管道设计的效率并减轻了查找管道信息的负担。它可以直观、轻松地检索最新的管道和设计数据。尺寸和重量单位可以设置为公制或美制单位。 Pipedata-Pro 于 1996 年由 Zeataline Projects 推出&#xff0c;现已遍布全球&#xff0c;Pipedata-Pro 管道表的映射…
阅读更多...
怎么判断两个文档节点时候相同？判断两个DOM节点时候相等、相同的4种方法

怎么判断两个文档节点时候相同？判断两个DOM节点时候相等、相同的4种方法

方法1&#xff1a; document.querySelector(html) document.querySelector(html) //true 方法2&#xff1a;compareDocumentPosition document.querySelector(html).compareDocumentPosition(document.querySelector(html)) //0 返回0就代表相同 方法3&#xff1a;isEqualNode …
阅读更多...
推荐文章
最新文章

Copyright @ 2022~2023