ORA/GSA -- 学习记录

news2024/11/18 11:24:25

brief

over-representation analysis(ORA),过表“达”分析，就是我们做多分组的RNAseq数据解析后会得到一些差异表达的gene，有些时候是单独拿出一个差异gene去解释表型，缺点是欠缺证据力度。有些人就把一些相关的差异gene放在一块儿解释，比如这些差异gene在某个通路中高表达/低表达，从而引起了这种表型。

gene set（predetermined sets of genes that are related or coordinated in their expression in some way）相关或者有某种程度关联的基因组成一个预先定义的gene list 。<------ 也就是我对这些来自样本数据解析后得到的基因感兴趣

所以，引申出来一种解释数据的方法，预先定义一个gene set，然后根据样本中属于gene set的gene 的表达量计算出一种分数，这个分数对表型的解释力度优先于一个差异 gene 表达量的解释力度。

ORA 就是一种计算gene set 分数的方法。其过程大致如下：

通过差异分析（limma或DESeq2等R包）基于不同的阈值设定（p-value以及log2FC）得到不同组间的差异表达基因DEG。
将DEG与感兴趣的基因集做交集（KEGG、GO、MSigDB等数据库），得到一些共同的基因。
基于超几何分布的Fisher检验来评估，抽到这些共同的基因的的计数值是否显著高于随机，即待测功能集在基因列表中是否显著富集。<------- 类似于两联表的fisher test

优点：基因集代表了一种通路/功能/调控/代谢等相关基因的集合，通过对基因集的整合分析，可以更好地解释数据和表型的关系。

缺点：1.仅使用了基因数目信息，而没有利用基因表达水平或表达差异值，为了获得感兴趣或者差异表达基因，需要人为的设置阈值
2.ORA法通常仅使用最显著的基因，而忽略差异不显著的基因。在获得感兴趣的基因时, 往往需要选取合适的阈值, 有可能会丢失显著性较低但比较关键的基因, 导致检测灵敏性的降低
3.将基因同等对待，ORA法假设每个基因都是独立的，忽视了基因在通路内部生物学意义的不同(如调控和被调控基因的不同)及基因间复杂的相互作用
4.ORA方法只关心差异表达基因而不关心其上调、下调的方向，也许同一条通路里既有显著高表达的基因，也有显著低表达的基因，因此最后得到的通路结果很难结合表型进行分析

代码演示

检验感兴趣的一些gene 在KEGG通路中是否富集：

# Over-representation testing using clusterProfiler is based on a hypergeometric test (often referred to as Fisher’s exact test) (Yu 2020).
#  For more background on hypergeometric tests, this handy tutorial explains more about how hypergeometric tests work (Puthier and van Helden 2015).
# or refer to https://blog.csdn.net/Luciferchang/article/details/115684092

library(clusterProfiler)

if (!("org.Hs.eg.db" %in% installed.packages())) {
  # Install this package if it isn't installed yet
  BiocManager::install("org.Hs.eg.db", update = FALSE)
}

library(org.Hs.eg.db)
library(AnnotationDbi)

# step1
# Determine our genes of interest list <--------- predetermined gene set
gs <- read.table("../20240305-manual-gene-set.txt")
# get gene id 
gene_ids <- mapIds(org.Hs.eg.db, keys = gs$V1, keytype = "SYMBOL", column = "ENTREZID")

# step2
# Determine our background set gene list <----- all or detected gene from RNAseq
background_set <- rownames(expr) # expr is gene expression matrix and rownames is all gene
background_gene_id <- mapIds(org.Hs.eg.db, keys = background_set, 
                             keytype = "SYMBOL", column = "ENTREZID")
# step3
# get kegg iterm
library(msigdbr)

hs_msigdb_df <- msigdbr(species = "Homo sapiens")
# Filter the human data frame to the KEGG pathways that are included in the curated gene sets
hs_kegg_df <- hs_msigdb_df %>%
  dplyr::filter(
    gs_cat == "C2", # This is to filter only to the C2 curated gene sets
    gs_subcat == "CP:KEGG" # This is because we only want KEGG pathways
)

# step4
# run fisher test
kegg_ora_results <- enricher(
  gene = gene_ids, # A vector of your genes of interest
  pvalueCutoff = 0.1, # Can choose a FDR cutoff
  pAdjustMethod = "BH", # Method to be used for multiple testing correction
  universe = background_gene_id, # A vector containing your background set genes
  # The pathway information should be a data frame with a term name or
  # identifier and the gene identifiers
  TERM2GENE = dplyr::select(
    hs_kegg_df,
    gs_name,
    human_entrez_gene
  )
)

#  visualization
kegg_result_df <- data.frame(kegg_ora_results@result)
kegg_result_df %>%
  dplyr::filter(p.adjust < 0.1)
enrich_plot <- enrichplot::dotplot(kegg_ora_results)

# Note: using enrichKEGG() is a shortcut for doing ORA using KEGG,
#  but the approach we covered here can be used with any gene sets you’d like!

在这里插入图片描述