说在前面

• esp32版本：s3
• 运行环境：esp-idf(std)
• 开发环境：wsl2
• LCD模块：ST7789V2 240*280 LCD
• github地址：这里

模块详情

• 某宙的esp32s3开发板
  

• 某雪的1.69inch LCD模块，包含杜邦线
  

准备工作

• 开发环境（std）搭建，见上篇

• lcd引脚
  

• esp32引脚
  

• 引脚连接
  除了几个固定的，其它可以自行选择，这里我的连接如下

  LCD	esp32(括号里为上图的序号)	esp32 gpio
  VCC	3.3V(18)	/
  GND	GND(17)	/
  DIN	SPI_MOSI(20)	GPIO17
  CLK	SPI_CK(19)	GPIO18
  CS	SPI_CS(23)	GPIO14
  DC	GPIO15(22)	GPIO15
  RST	GPIO16(21)	GPIO16
  BL	GPIO13(24)	GPIO13

开始

• 如果从空工程开始的话，可以使用code-generate

  cargo generate esp-rs/esp-idf-template cargo
  

• 添加依赖

  [features]
  default = ["std", "embassy", "esp-idf-svc/native"]
  
  pio = ["esp-idf-svc/pio"]
  std = ["alloc", "esp-idf-svc/binstart", "esp-idf-svc/std"]
  alloc = ["esp-idf-svc/alloc"]
  nightly = ["esp-idf-svc/nightly"]
  experimental = ["esp-idf-svc/experimental"]
  embassy = ["esp-idf-svc/embassy-sync", "esp-idf-svc/critical-section", "esp-idf-svc/embassy-time-driver"]
  
  
  [dependencies]
  anyhow = {version = "1", features = ["backtrace"]}
  log = { version = "0.4", default-features = false }
  esp-idf-svc = { version = "0.47.1", default-features = false }
  embedded-graphics = "0.8.1"
  display-interface-spi = "0.4"
  mipidsi = "0.7.1"
  
  [build-dependencies]
  embuild = "0.31.3"
  
  [package.metadata.esp-idf-sys]
  esp_idf_tools_install_dir = "global"
  

• 代码(逻辑基本和树莓派一致)

  use display_interface_spi::SPIInterfaceNoCS;
  use embedded_graphics::{mono_font::{MonoTextStyle, ascii::FONT_10X20}, pixelcolor::Rgb565, text::Text, prelude::*, Drawable};
  use esp_idf_svc::hal::{spi, gpio, prelude::*};
  use anyhow::Result;
  
  fn main() -> Result<()> {
      // It is necessary to call this function once. Otherwise some patches to the runtime
      // implemented by esp-idf-sys might not link properly. See https://github.com/esp-rs/esp-idf-template/issues/71
      esp_idf_svc::sys::link_patches();
  
      // Bind the log crate to the ESP Logging facilities
      esp_idf_svc::log::EspLogger::initialize_default();
  
      let peripherals = Peripherals::take().unwrap();
      let pins = peripherals.pins;
  
      test_lcd(
          peripherals.spi2,
          pins.gpio13.into(),
          pins.gpio15.into(),
          pins.gpio16.into(),
          pins.gpio18.into(),
          pins.gpio17.into(),
          pins.gpio14.into(),
      )?;
  
      Ok(())
  }
  
  fn test_lcd(
      spi: spi::SPI2,
      backlight: gpio::AnyOutputPin,
      dc: gpio::AnyOutputPin,
      rst: gpio::AnyOutputPin,
      sclk: gpio::AnyOutputPin,
      sdo: gpio::AnyOutputPin,
      cs: gpio::AnyOutputPin,
  ) -> Result<()> {
      let driver = spi::SpiDeviceDriver::new_single(
          spi,
          sclk,
          sdo,
          Option::<gpio::AnyIOPin>::None,
          Some(cs),
          &spi::SpiDriverConfig::new().dma(spi::Dma::Disabled),
          &spi::SpiConfig::new()
              .baudrate(20_000_000.into())
              .data_mode(esp_idf_svc::hal::spi::config::MODE_0),
      )?;
  
      let dc = gpio::PinDriver::output(dc)?;
      let rst = gpio::PinDriver::output(rst)?;
      let mut backlight = gpio::PinDriver::output(backlight)?;
  
      let di = SPIInterfaceNoCS::new(driver, dc);
  
      let mut delay = esp_idf_svc::hal::delay::Ets;
      let mut display = mipidsi::Builder::st7789(di)
          .with_display_size(240, 280)
          .with_orientation(mipidsi::Orientation::Landscape(true))
          .init(&mut delay, Some(rst))
          .unwrap();
  
      // Text
      let text = "Hello World ^_^;";
      let text_x = 120;
      let text_y = 280 / 2;
      let text_style = MonoTextStyle::new(&FONT_10X20, Rgb565::WHITE);
  
      // Alternating color
      let colors = [Rgb565::RED, Rgb565::GREEN, Rgb565::BLUE];
  
      // Clear the display initially
      display.clear(colors[0]).unwrap();
  
      // Turn on backlight
      let _ = backlight.set_high();
  
      // Draw text
      Text::new(text, Point::new(text_x, text_y), text_style)
          .draw(&mut display)
          .unwrap();
      println!("Draw Hello from Rust!");
  
      Ok(())
  }
  

编译

• 编译如果不通过，可以参考环境搭建

  cargo build --target xtensa-esp32s3-espidf
  

烧录

• wsl访问usb设备见环境搭建

  espflash flash target/xtensa-esp32s3-espidf/debug/rs-esp32s3-st7789-demo
  

结果