According to the characteristic of fan-coil air-conditioning systems, this paper derives the cooling formula of fan-coil units based on the heat transfer theories and puts forward a new method to gauge cooling named Cooling Metering on the Airside, which can monitor the individual air-conditioning cooling consumption during a period of time by detecting the parameters of inlet air condition – temperature and humidity – of the fan-coil air-conditioning system as well as the parameters of inlet cooling water provided by the chiller.
Correct
This paper derives the cooling formula of fan-coil units based on the characteristics of fan-coil air-conditioning systems and heat transfer theories, and puts forward a new method to gauge cooling called Cooling Metering on the Air-side. The new method can monitor individual air-conditioning cooling consumption during a period of time by detecting the condition of inlet air – temperature and humidity – of the fan-coil air-conditioning system as well as the parameters of the inlet cooling water provided by the chiller.
Too long
The gear transmission is grade seven, the gear gap is 0.00012 radians, the gear gap has different output values corresponding to any given input value, nonlinearity of the gear gap model can be described by using the phase function method, the existing backlash block in the non-linear library of the Matlab/zdimulink toolbox can be used, the initial value of gear gap in the backlash block is set to zero.
Correct
The gear transmission is grade seven. The gear gap, which is 0.00012 radians, has different output values corresponding to any given input value. The nonlinearity of the gear gap model can be described by using the phase function method. The existing backlash block in the non-linear library of the Matlab/zdimulink toolbox can be used; the initial value of gear gap in the backlash block is set to zero.
For the application in automobile interiors, this paper studies the nesting optimization problem in leather manufacturing.
Correct
This paper studies the nesting optimization problem in leather manufacturing for application in automobile interiors.
Incorrect
Especially when numerical control (NC) techniques[4] are widely used in industry and rapid prototype methods[5][6] bring a huge economical benefits, the advantage of constructing 3D model[7][8][9] becomes extremely obvious.
Correct
The advantage of constructing a 3D model[7][8][9] becomes extremely obvious especially when numerical control (NC) techniques[4] are widely used in industry and rapid prototype methods[5][6] bring a huge economical benefits.
Incorrect
Inside the test box, the space was filled with asbestos.
Correct
The space inside the test box was filled with asbestos.
Incorrect
In practice, we employed this approach to dispose of a wheelhouse subassembly of one kind of auto-body, and the results show that this method is feasible.
Correct
We employed this approach to dispose of a wheelhouse subassembly of one kind of auto-body, and the results show that this method is feasible.
Incorrect
To ensure sheet metal quality as well as assembly quality, CMMs are widely used in automotive industry production.
Correct
CMMs are widely used in automotive industry production to ensure sheet metal quality as well as assembly quality.
将表示时间的短语放在句首的倾向
Incorrect
When U is taken as the control parameter, the BDs for ∆=0.0, 0.001, 0.005 are shown in Fig. 8.
Correct
Figure 8 shows the BDs for ∆=0.0, 0.001, and 0.005 when U is taken as the control parameter.
将最重要的主语放在句首,以示强调
Incorrect Based on the triangulation structure built from unorganized points or a CAD
model, the extended STL format is described in this section.
Correct
The extended STL format is described in this section based on the triangulation structure built from unorganized points or a CAD model.
Incorrect
The 3D dentition defect and restoration element models are designed precisely with complicated surfaces
Correct
The 3D dentition defect and restoration element models with complicated surfaces are designed precisely.
How do I cover the taskbar with a fullscreen window? - The Old New Thing (microsoft.com)https://devblogs.microsoft.com/oldnewthing/20050505-04/?p35703
Raymond Chen 2005年5月5日 如何用全屏窗口覆盖任务栏? 很多时候,人们总是想得太多。…
题干: 代码;
class Solution {
public:bool traversal(TreeNode* node, int count){if(node NULL)return false;if(!node -> left && !node -> right && count 0)return true;if(!node -> left && !node -> right &&…