hyper-v ubuntu 3节点 k8s集群搭建

前奏

搭建一主二从的k8s集群，如图所示，准备3台虚拟机。
在这里插入图片描述不会创建的同学，可以看我上上篇博客：https://blog.csdn.net/dawnto/article/details/135086252
和上篇博客：https://blog.csdn.net/dawnto/article/details/135096182

由于测试机器资源有限，将3台虚拟机内存均设置为2048MB，CPU核心均设置为2核。

宿主机cpu和内存均在可控范围内，不影响其他程序运行
在这里插入图片描述这三台虚拟机都可正常访问互联网，且配置了静态ip，分别是：

192.168.66.1
192.168.66.2
192.168.66.3

网关是：192.168.66.254
在这里插入图片描述
现在修改一下三台虚拟机的主机名
sudo vim /etc/hostname
分别修改为

ubuntu1
ubuntu2
ubuntu3

分别reboot即可

看一下，非常的整齐
在这里插入图片描述为了加快我们控制三台机器的速度：
选择一个好用的，开源免费的，国人维护的终端工具：https://github.com/electerm/electerm/releases

点书签可以创建连接
在这里插入图片描述这里创建3个连接
将下边的开关打开，这样命令会同步在多个终端中执行

我们同步一下hosts文件，让虚拟机内部可以通过hostname访问其他虚拟机（若DNS支持主机域名解析，则无需配置）

cat >> /etc/hosts <<EOF
192.168.66.1 ubuntu1
192.168.66.2 ubuntu2
192.168.66.3 ubuntu3
EOF

此时验证一下，在ubuntu2 中 ping ubuntu3，可见没有问题
在这里插入图片描述
关闭防火墙，两步走
停止：service ufw stop
永久关闭：systemctl disable ufw

关闭交换分区，两步走
swapoff -a 禁用交换分区
vim /etc/fstab 注释掉下图最后一行 /swap …，永久禁用交换分区
在这里插入图片描述
禁用 selinux（可选的）
ubuntu 默认不安装 selinux
使用：getenforce，查看一下，是否有安装selinux，若有该命令则安装，安装则执行下述操作
有的话就，两步走
setenforce 0，临时关闭
vim /etc/selinux/config 永久关闭selinux
将SELINUX设置成disabled
未安装就不用管了
在这里插入图片描述同步时间，使用ntpdate工具
sudo apt-get install ntpdate
若没有，此时更新一下索引和源
sudo apt-get update
sudo apt-get upgrade
再次安装

安装以后执行ntpdate time.windows.com，同步时间
在这里插入图片描述发现现在时区还没设置，图片中时区明显不对
使用date -R再看一番，雀食不对鸭
那就设置一下东八区
使用命令：timedatectl set-timezone Asia/Shanghai 设置时区，亚洲，上海
使用命令再次同步：ntpdate time.windows.com，ok啦~
在这里插入图片描述
允许 iptables 检查桥接流量

cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
br_netfilter
EOF

cat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF

sudo sysctl --system
后续操作可能不生效，reboot一下再切回root用户

安装containerd，容器运行时，（不直接用docker）

# 使用 docker 源安装最新版本 containerd / docker
sudo apt install \
    ca-certificates \
    curl \
    gnupg \
    lsb-release

sudo mkdir -p /etc/apt/keyrings
curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo gpg --dearmor -o /etc/apt/keyrings/docker.gpg

echo \
  "deb [arch=$(dpkg --print-architecture) signed-by=/etc/apt/keyrings/docker.gpg] https://download.docker.com/linux/ubuntu \
  $(lsb_release -cs) stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null

sudo apt update
sudo apt install containerd.io

# sudo apt install docker-ce docker-ce-cli containerd.io docker-compose-plugin

配置containerd

sudo mkdir -p /etc/containerd
containerd config default | sudo tee /etc/containerd/config.toml

sudo vim /etc/containerd/config.toml
将 [plugins.“io.containerd.grpc.v1.cri”]
中 sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.6"，换成红色区域内的

将 [plugins.“io.containerd.grpc.v1.cri”.containerd.runtimes.runc.options]
中的 SystemdCgroup = true，替换为true

安装kubernetes

sudo apt-get update
# apt-transport-https 可能是一个虚拟包（dummy package）；如果是的话，你可以跳过安装这个包
sudo apt-get install -y apt-transport-https ca-certificates curl gpg

curl -fsSL https://pkgs.k8s.io/core:/stable:/v1.29/deb/Release.key | sudo gpg --dearmor -o /etc/apt/keyrings/kubernetes-apt-keyring.gpg

# 此操作会覆盖 /etc/apt/sources.list.d/kubernetes.list 中现存的所有配置。
echo 'deb [signed-by=/etc/apt/keyrings/kubernetes-apt-keyring.gpg] https://pkgs.k8s.io/core:/stable:/v1.29/deb/ /' | sudo tee /etc/apt/sources.list.d/kubernetes.list

sudo apt-get update
sudo apt-get install -y kubelet kubeadm kubectl
sudo apt-mark hold kubelet kubeadm kubectl

使用kubeadm创建一主二从集群

此命令在主节点中执行

kubeadm init \
    --image-repository registry.aliyuncs.com/google_containers \
    --pod-network-cidr=10.244.0.0/16 \
    --cri-socket unix:///run/containerd/containerd.sock \
    --skip-phases=addon/kube-proxy \
    --apiserver-advertise-address=192.168.66.1

–apiserver-advertise-address=192.168.66.1，即主节点的ip
–pod-network-cidr=10.244.0.0/16 是容器内网络，随意设置，合规即可

然后。。。它报错了

root@ubuntu1:~# kubeadm init \
    --image-repository registry.aliyuncs.com/google_containers \
    --pod-network-cidr=10.244.0.0/16 \
    --cri-socket unix:///run/containerd/containerd.sock \
    --skip-phases=addon/kube-proxy \
    --apiserver-advertise-address=192.168.66.1

[init] Using Kubernetes version: v1.29.0
[preflight] Running pre-flight checks
error execution phase preflight: [preflight] Some fatal errors occurred:
        [ERROR FileContent--proc-sys-net-ipv4-ip_forward]: /proc/sys/net/ipv4/ip_forward contents are not set to 1
[preflight] If you know what you are doing, you can make a check non-fatal with `--ignore-preflight-errors=...`
To see the stack trace of this error execute with --v=5 or higher
root@ubuntu1:~#

使用 echo "1" > /proc/sys/net/ipv4/ip_forward，修改值为1
然后再次执行初始化集群命令，成了
在这里插入图片描述拷贝最后一行kubeadm join …

kubeadm join 192.168.66.1:6443 --token fwdwt9.bkqic5biggzkflfi         --discovery-token-ca-cert-hash sha256:5802abd8404665ad92c3b92c0da34a16fdcf9768d54e7a38f234721af3025bdc

到另外两个机器中执行，让从节点加入集群
在这里插入图片描述复制一下配置文件

mkdir -p $HOME/.kube  
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config  
sudo chown (id -u):(id -g) $HOME/.kube/config

在主节点执行kubectl get pods -A，发现有pod正处于Pending状态
在这里插入图片描述执行kubectl get nodes，发现节点都没有准备好
NotReady的主要原因是集群缺少DNS插件
在主节点上创建一个文件：kube-flannel.yml，内容如下

---
kind: Namespace
apiVersion: v1
metadata:
  name: kube-flannel
  labels:
    k8s-app: flannel
    pod-security.kubernetes.io/enforce: privileged
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: flannel
  name: flannel
rules:
- apiGroups:
  - ""
  resources:
  - pods
  verbs:
  - get
- apiGroups:
  - ""
  resources:
  - nodes
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - nodes/status
  verbs:
  - patch
- apiGroups:
  - networking.k8s.io
  resources:
  - clustercidrs
  verbs:
  - list
  - watch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: flannel
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-flannel
---
apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    k8s-app: flannel
  name: flannel
  namespace: kube-flannel
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-flannel
  labels:
    tier: node
    k8s-app: flannel
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds
  namespace: kube-flannel
  labels:
    tier: node
    app: flannel
    k8s-app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
            - matchExpressions:
              - key: kubernetes.io/os
                operator: In
                values:
                - linux
      hostNetwork: true
      priorityClassName: system-node-critical
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni-plugin
        image: docker.io/flannel/flannel-cni-plugin:v1.2.0
        command:
        - cp
        args:
        - -f
        - /flannel
        - /opt/cni/bin/flannel
        volumeMounts:
        - name: cni-plugin
          mountPath: /opt/cni/bin
      - name: install-cni
        image: docker.io/flannel/flannel:v0.24.0
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: docker.io/flannel/flannel:v0.24.0
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN", "NET_RAW"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        - name: EVENT_QUEUE_DEPTH
          value: "5000"
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
        - name: xtables-lock
          mountPath: /run/xtables.lock
      volumes:
      - name: run
        hostPath:
          path: /run/flannel
      - name: cni-plugin
        hostPath:
          path: /opt/cni/bin
      - name: cni
        hostPath:
          path: /etc/cni/net.d
      - name: flannel-cfg
        configMap:
          name: kube-flannel-cfg
      - name: xtables-lock
        hostPath:
          path: /run/xtables.lock
          type: FileOrCreate

执行：kubectl apply -f kube-flannel.yml，创建kube-flannel pod
再次执行：kubectl get nodes，发现已经Ready，撒花~
在这里插入图片描述若出现：

lugin type="flannel" failed (add): loadFlannelSubnetEnv failed: open /run/flannel/subnet.env: no such file or directory

看引用3
在每个节点创建文件/run/flannel/subnet.env写入以下内容

FLANNEL_NETWORK=10.244.0.0/16
FLANNEL_SUBNET=10.244.0.1/24
FLANNEL_MTU=1450
FLANNEL_IPMASQ=true

Reference
1.https://zhuanlan.zhihu.com/p/627310856?utm_id=0
2.https://juejin.cn/post/7208088676853252156
3.https://blog.csdn.net/YangCheney/article/details/127046204