pipework可以减轻docker实施过程中的工作量，在网上也找了几篇类似的文章，按照相应配置，结果并不相同
如下测试过程记录下：
docker run -it --rm --name c1 busybox
docker run -it --rm --name c2 busybox
pipework br1 c1 192.168.1.1/24
pipework br1 c2 192.168.1.2/24
pipework会先创建名字为br1的网桥设备
brctl show
bridge name bridge id STP enabled interfaces
br-a98ac3623dc0 8000.02428a6f2873 no
br1 8000.029bd18e4212 no veth1pl10954
veth1pl11133
veth1pl1888
veth1pl2121
docker0 8000.0242fdc0477a no veth21004f8
veth681b955
veth98aa1a9
veth9d6f865
vetha4231a6
vethbc3d6e8
vethea7ee4f
vethf1a4afb
这样，并且两个容器中除了eth0设备是挂接在docker0网桥上，还添加了一个eth1，该设备是链接在pipework建的br1上，如下所示
ifconfig
eth0 Link encap:Ethernet HWaddr 02:42:AC:11:00:06
inet addr:172.17.0.6 Bcast:172.17.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1608 (1.5 KiB) TX bytes:280 (280.0 B)
eth1 Link encap:Ethernet HWaddr CA:25:10:70:61:9E
inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:51 errors:0 dropped:0 overruns:0 frame:0
TX packets:27 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:3502 (3.4 KiB) TX bytes:2310 (2.2 KiB)
ifconfig
eth1 Link encap:Ethernet HWaddr 92:27:1B:83:59:23
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:41 errors:0 dropped:0 overruns:0 frame:0
TX packets:15 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
eth0 Link encap:Ethernet HWaddr 02:42:AC:11:00:07
inet addr:172.17.0.7 Bcast:172.17.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:23 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:1650 (1.6 KiB) TX bytes:952 (952.0 B)
然后再c1中ping c2 ,但是发现并不能ping的通，这跟网上介绍的测试结果不相同，如下
ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes但是使用docker自动分配的ip是可以ping的通的
ping 172.17.0.7
PING 172.17.0.7 (172.17.0.7): 56 data bytes
64 bytes from 172.17.0.7: seq=0 ttl=64 time=0.207 ms
64 bytes from 172.17.0.7: seq=1 ttl=64 time=0.188 ms
64 bytes from 172.17.0.7: seq=2 ttl=64 time=0.154 ms为什么会出现这种现象呢，原因是
docker启动的过程中，icc选项默认是true，因此iptables的FORWARD中会添加一条
从docker到docker的包，accept，因此可以通。
当然了如果把icc选项关闭掉，通过docker0的bridge的ip也是不通的。
如果想让192.168网段也能ping的通，可以讲br1也加入到该规则中
[root@bigdataserver ~]# iptables -I FORWARD -i br1 -o br1 -j ACCEPT
[root@bigdataserver ~]# iptables -nvL FORWARD
Chain FORWARD (policy DROP 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 ACCEPT all -- br1 br1 0.0.0.0/0 0.0.0.0/0
205K 327M DOCKER-USER all -- * * 0.0.0.0/0 0.0.0.0/0
205K 327M DOCKER-ISOLATION-STAGE-1 all -- * * 0.0.0.0/0 0.0.0.0/0
109K 319M ACCEPT all -- * docker0 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED
22 1464 DOCKER all -- * docker0 0.0.0.0/0 0.0.0.0/0
96478 7766K ACCEPT all -- docker0 !docker0 0.0.0.0/0 0.0.0.0/0
10 840 ACCEPT all -- docker0 docker0 0.0.0.0/0 0.0.0.0/0
775 653K ACCEPT all -- * br-a98ac3623dc0 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED
5 292 DOCKER all -- * br-a98ac3623dc0 0.0.0.0/0 0.0.0.0/0
653 82556 ACCEPT all -- br-a98ac3623dc0 !br-a98ac3623dc0 0.0.0.0/0 0.0.0.0/0
1 84 ACCEPT all -- br-a98ac3623dc0 br-a98ac3623dc0 0.0.0.0/0 0.0.0.0/0
测试再测试
ping 192.168.1.2
PING 192.168.1.2 (192.168.1.2): 56 data bytes
64 bytes from 192.168.1.2: seq=0 ttl=64 time=0.221 ms
64 bytes from 192.168.1.2: seq=1 ttl=64 time=0.150 ms
64 bytes from 192.168.1.2: seq=2 ttl=64 time=0.152 ms
^C
--- 192.168.1.2 ping statistics ---
3 packets transmitted, 3 packets received, 0% packet loss
round-trip min/avg/max = 0.150/0.174/0.221 ms
另外信息：
docker inspect -f '{{.State.Pid}}' c1
1888
[root@bigdataserver ~]# docker inspect -f '{{.State.Pid}}' c2
2121
495 # Remove NSPID to avoid `ip netns` catch it.
496 rm -f "/var/run/netns/$NSPID"
使用pipework会再程序最后删除/var/run/netns的软连接，因此无法使用ip netns exec抓取到相关信息
我们可以手动建下软连接以方便使用ip命令进行查询
ln -s /proc/1888/ns/net /var/run/netns/1888
ln -s /proc/2121/ns/net /var/run/netns/2121
ip netns exec 1888 ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
390: eth0@if391: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether 02:42:ac:11:00:06 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 172.17.0.6/16 brd 172.17.255.255 scope global eth0
valid_lft forever preferred_lft forever
395: eth1@if396: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether ca:25:10:70:61:9e brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 192.168.1.1/24 brd 192.168.1.255 scope global eth1
valid_lft forever preferred_lft forever
ip netns exec 2121 ip addr show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
392: eth0@if393: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether 02:42:ac:11:00:07 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 172.17.0.7/16 brd 172.17.255.255 scope global eth0
valid_lft forever preferred_lft forever
397: eth1@if398: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 92:27:1b:83:59:23 brd ff:ff:ff:ff:ff:ff link-netnsid 0
inet 192.168.1.2/24 brd 192.168.1.255 scope global eth1
valid_lft forever preferred_lft forever
