OpenHarmony4.0适配LVDS屏幕驱动

news2024/10/7 2:29:32

1.概述

手头有一块RK3568的开发板OK3568-C，但是还没有适配OpenHarmony，用的还是LVDS屏幕，但是官方和网上好像还没有OpenHarmony4.0的LVDS屏幕驱动的通用实现，所以决定尝试了一下适配该开发板，完成LVDS屏幕驱动的适配，点亮屏幕。
源代码：oh4.0-lvds-ok3568-c

2.具体实现

2.1 添加ok3568产品（非必须，可以跳过，直接修改原有的rk3568产品）

因为OK3568-C开发板使用的是RK3568芯片，和OpenHarmony的主线分支一样，所以添加ok3568产品的基础流程比较简单，就是复制device和vendor下面rk3568的文件夹，改为ok3568，并加入ok3568对应的设备树文件，修改build文件下面的编译配置文件（不修改编译会报错），具体流程可以参考官方和网上的其他教程。

本次使用的LVDS屏幕对应的设备树节点如下：
OK3568-common.dtsi
在这里插入图片描述

2.2 分析原有的MIPI屏幕驱动

参考鸿蒙系统原有的MIPI屏幕驱动目录（drivers/framework/model/display/driver）下面的ili9881_st_5p5.c和hdf_drm_panel.c：
在这里插入图片描述
在这里插入图片描述

可以看出鸿蒙原有的MIPI屏幕驱动实际上参考了Linux内核的drivers/gpu/drm/panel/panel-simple.c的“simple-panel-dsi”部分，不知道为什么官方没有把panel-simple.c中剩下的“simple-panel”部分加进去。而“simple-panel”剩余的部分就是LVDS和EDP这类屏幕通用的驱动。

2.3 实现LVDS屏幕驱动

这里我们也参考Linux内核的drivers/gpu/drm/panel/panel-simple.c

2.3.1 读取设备树里面的"simple-panel"节点，获取Panel的参数

添加如下两个文件：
panel_simple_common.h

/*
 *
 * HDF is dual licensed: you can use it either under the terms of
 * the GPL, or the BSD license, at your option.
 * See the LICENSE file in the root of this repository for complete details.
 */

#ifndef PANEL_SIMPLE_COMMON_H
#define PANEL_SIMPLE_COMMON_H

#include <linux/backlight.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/regulator/consumer.h>
#include <linux/gpio/consumer.h>

#include <video/display_timing.h>
#include <video/mipi_display.h>
#include <video/of_display_timing.h>
#include <video/videomode.h>

#include <drm/drm_modes.h>
#include <drm/drm_panel.h>

#include <uapi/drm/drm_mode.h>

#include "securec.h"

#include "hdf_disp.h"
#include "hdf_drm_panel_simple.h"

#endif  /* PANEL_SIMPLE_COMMON_H */

panel_simple_common.c

/*
 *
 * HDF is dual licensed: you can use it either under the terms of
 * the GPL, or the BSD license, at your option.
 * See the LICENSE file in the root of this repository for complete details.
 */

#include "panel_simple_common.h"
#include "gpio_if.h"
#include "hdf_bl.h"
#include "hdf_disp.h"
#include "osal.h"

static inline struct panel_simple *to_panel_simple(const struct drm_panel *panel)
{
    return container_of(panel, struct panel_simple, panel);
}

static inline struct panel_simple *to_panel_simple_by_data(const struct PanelData *panel_data)
{
    return container_of(panel_data, struct panel_simple, panel_data);
}

static int panel_simple_parse_cmd_seq(struct device *dev,
				      const u8 *data, int length,
				      struct panel_cmd_seq *seq)
{
	struct panel_cmd_header *header;
	struct panel_cmd_desc *desc;
	char *buf, *d;
	unsigned int i, cnt, len;

	if (!seq)
		return -EINVAL;

	buf = (u8 *)OsalMemCalloc(length);
	if (!buf)
		return -ENOMEM;
	memcpy_s(buf, length, data, length);

	d = buf;
	len = length;
	cnt = 0;
	while (len > sizeof(*header)) {
		header = (struct panel_cmd_header *)d;

		d += sizeof(*header);
		len -= sizeof(*header);

		if (header->payload_length > len)
			return -EINVAL;

		d += header->payload_length;
		len -= header->payload_length;
		cnt++;
	}

	if (len)
		return -EINVAL;

	seq->cmd_cnt = cnt;
	seq->cmds = (struct panel_cmd_desc *)OsalMemCalloc(sizeof(*desc));
	if (!seq->cmds)
		return -ENOMEM;

	d = buf;
	len = length;
	for (i = 0; i < cnt; i++) {
		header = (struct panel_cmd_header *)d;
		len -= sizeof(*header);
		d += sizeof(*header);

		desc = &seq->cmds[i];
		desc->header = *header;
		desc->payload = d;

		d += header->payload_length;
		len -= header->payload_length;
	}

	return 0;
}

static int32_t panel_simple_regulator_enable(struct panel_simple *p)
{
    int32_t err;
    
	if (p->power_invert) {
		if (regulator_is_enabled(p->supply) > 0)
			regulator_disable(p->supply);
	} else {
		err = regulator_enable(p->supply);
		if (err < 0)
			return err;
	}

    return 0;
}

static int32_t panel_simple_regulator_disable(struct panel_simple *p)
{
    int err;

	if (p->power_invert) {
		if (!regulator_is_enabled(p->supply)) {
			err = regulator_enable(p->supply);
			if (err < 0)
				return err;
		}
	} else {
		regulator_disable(p->supply);
	}

	return 0;
}

int panel_simple_loader_protect(struct drm_panel *panel)
{
    struct panel_simple *p = to_panel_simple(panel);
	int err;

	err = panel_simple_regulator_enable(p);
	if (err < 0) {
		HDF_LOGE("failed to enable supply: %d\n", err);
		return err;
	}

	p->prepared = true;
	p->enabled = true;

	return 0;
}
EXPORT_SYMBOL(panel_simple_loader_protect);

static int panel_simple_get_hpd_gpio(struct device *dev,
				     struct panel_simple *p, bool from_probe)
{
	int err;

	p->hpd_gpio = devm_gpiod_get_optional(dev, "hpd", GPIOD_IN);
	if (IS_ERR(p->hpd_gpio)) {
		err = PTR_ERR(p->hpd_gpio);

		/*
		 * If we're called from probe we won't consider '-EPROBE_DEFER'
		 * to be an error--we'll leave the error code in "hpd_gpio".
		 * When we try to use it we'll try again.  This allows for
		 * circular dependencies where the component providing the
		 * hpd gpio needs the panel to init before probing.
		 */
		if (err != -EPROBE_DEFER || !from_probe) {
			HDF_LOGE("failed to get 'hpd' GPIO: %d\n", err);
			return err;
		}
	}

	return 0;
}

#define PANEL_SIMPLE_BOUNDS_CHECK(to_check, bounds, field) \
	(to_check->field.typ >= bounds->field.min && \
	 to_check->field.typ <= bounds->field.max)
static void panel_simple_parse_panel_timing_node(struct device *dev,
						 struct panel_simple *panel,
						 const struct display_timing *ot)
{
	const struct panel_desc *desc = panel->desc;
	struct videomode vm;
	unsigned int i;

	if (WARN_ON(desc->num_modes)) {
		HDF_LOGE("Reject override mode: panel has a fixed mode\n");
		return;
	}
	if (WARN_ON(!desc->num_timings)) {
		HDF_LOGE("Reject override mode: no timings specified\n");
		return;
	}

	for (i = 0; i < panel->desc->num_timings; i++) {
		const struct display_timing *dt = &panel->desc->timings[i];

		if (!PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hactive) ||
		    !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hfront_porch) ||
		    !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hback_porch) ||
		    !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, hsync_len) ||
		    !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vactive) ||
		    !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vfront_porch) ||
		    !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vback_porch) ||
		    !PANEL_SIMPLE_BOUNDS_CHECK(ot, dt, vsync_len))
			continue;

		if (ot->flags != dt->flags)
			continue;

		videomode_from_timing(ot, &vm);
		drm_display_mode_from_videomode(&vm, &panel->override_mode);
		panel->override_mode.type |= DRM_MODE_TYPE_DRIVER |
					     DRM_MODE_TYPE_PREFERRED;
		break;
	}

	if (WARN_ON(!panel->override_mode.type))
		HDF_LOGE("Reject override mode: No display_timing found\n");
}

static int32_t PanelOn(struct PanelData *data)
{
    struct panel_simple *p = to_panel_simple_by_data(data);

	if (p->enabled)
		return HDF_SUCCESS;

	if (p->desc->delay.enable)
		OsalMSleep(p->desc->delay.enable);

	p->enabled = true;

    return HDF_SUCCESS;
}

static int32_t PanelOff(struct PanelData *data)
{
    struct panel_simple *simplePanel = NULL;

    simplePanel = to_panel_simple_by_data(data);
    if (simplePanel->desc->delay.disable) {
        OsalMSleep(simplePanel->desc->delay.disable);
    }
    return HDF_SUCCESS;
}

static int32_t PanelPrepare(struct PanelData *data)
{
    struct panel_simple *p = to_panel_simple_by_data(data);
	unsigned int delay;
	int err;
	int hpd_asserted;

	if (p->prepared)
		return HDF_SUCCESS;

	err = panel_simple_regulator_enable(p);
	if (err < 0) {
		HDF_LOGE("failed to enable supply: %d\n", err);
		return err;
	}

	gpiod_direction_output(p->enable_gpio, 1);

	if (p->desc->delay.reset)
		OsalMSleep(p->desc->delay.reset);

	gpiod_direction_output(p->reset_gpio, 1);

	if (p->desc->delay.reset)
		OsalMSleep(p->desc->delay.reset);

	gpiod_direction_output(p->reset_gpio, 0);

	delay = p->desc->delay.prepare;
	if (p->no_hpd)
		delay += p->desc->delay.hpd_absent_delay;
	if (delay)
		OsalMSleep(delay);

	// if (p->hpd_gpio) {
	// 	if (IS_ERR(p->hpd_gpio)) {
	// 		err = panel_simple_get_hpd_gpio(panel->dev, p, false);
	// 		if (err)
	// 			return err;
	// 	}

	// 	err = readx_poll_timeout(gpiod_get_value_cansleep, p->hpd_gpio,
	// 				 hpd_asserted, hpd_asserted,
	// 				 1000, 2000000);
	// 	if (hpd_asserted < 0)
	// 		err = hpd_asserted;

	// 	if (err) {
	// 		HDF_LOGE("error waiting for hpd GPIO: %d\n", err);
	// 		return err;
	// 	}
	// }

	// if (p->desc->init_seq)
	// 	if (p->dsi)
	// 		panel_simple_xfer_dsi_cmd_seq(p, p->desc->init_seq);

	if (p->desc->delay.init)
		OsalMSleep(p->desc->delay.init);

	p->prepared = true;

    return HDF_SUCCESS;
}

static int32_t PanelUnprepare(struct PanelData *data)
{
    int32_t ret;
    struct panel_simple *p = NULL;

    p = to_panel_simple_by_data(data);

	if (!p->prepared)
		return HDF_SUCCESS;

    gpiod_direction_output(p->reset_gpio, 1);
    gpiod_direction_output(p->enable_gpio, 0);

    panel_simple_regulator_disable(p);

    if (p->desc->delay.unprepare) {
        OsalMSleep(p->desc->delay.unprepare);
    }

    return HDF_SUCCESS;
}

static int32_t PanelInit(struct PanelData *panel)
{
    return 0;
}

static int32_t panel_simple_probe(struct device *dev, struct panel_simple *panel)
{
	const struct panel_desc *desc = panel->desc;
    struct display_timing dt;
    int connector_type;
	u32 bus_flags;
    int32_t err;

    panel->no_hpd = of_property_read_bool(dev->of_node, "no-hpd");
	if (!panel->no_hpd) {
		err = panel_simple_get_hpd_gpio(dev, panel, true);
		if (err){
			HDF_LOGE("%s Get hpd gpio fail %d", __func__, err);
		    goto FAIL;
        }
	}

    panel->supply = devm_regulator_get(dev, "power");
    if (IS_ERR(panel->supply)) {
        HDF_LOGE("%s Get regulator fail %d", __func__, PTR_ERR(panel->supply));
        goto FAIL;
    }

    panel->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_ASIS);
    if (IS_ERR(panel->enable_gpio)) {
        HDF_LOGE("%s get enable_gpio fail %d", __func__, PTR_ERR(panel->enable_gpio));
        goto FAIL;
    }

    panel->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
    if (IS_ERR(panel->reset_gpio)) {
        HDF_LOGE("get reset_gpio fail %d", __func__, PTR_ERR(panel->reset_gpio));
        goto FAIL;
    }

    if (!of_get_display_timing(dev->of_node, "panel-timing", &dt))
		panel_simple_parse_panel_timing_node(dev, panel, &dt);

    connector_type = desc->connector_type;
	/* Catch common mistakes for panels. */
	switch (connector_type) {
	case 0:
		HDF_LOGD("Specify missing connector_type\n");
		connector_type = DRM_MODE_CONNECTOR_DPI;
		break;
	case DRM_MODE_CONNECTOR_LVDS:
		WARN_ON(desc->bus_flags &
			~(DRM_BUS_FLAG_DE_LOW |
			  DRM_BUS_FLAG_DE_HIGH |
			  DRM_BUS_FLAG_DATA_MSB_TO_LSB |
			  DRM_BUS_FLAG_DATA_LSB_TO_MSB));
		WARN_ON(desc->bus_format != MEDIA_BUS_FMT_RGB666_1X7X3_SPWG &&
			desc->bus_format != MEDIA_BUS_FMT_RGB888_1X7X4_SPWG &&
			desc->bus_format != MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA);
		WARN_ON(desc->bus_format == MEDIA_BUS_FMT_RGB666_1X7X3_SPWG &&
			desc->bpc != 6);
		WARN_ON((desc->bus_format == MEDIA_BUS_FMT_RGB888_1X7X4_SPWG ||
			 desc->bus_format == MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA) &&
			desc->bpc != 8);
		break;
	case DRM_MODE_CONNECTOR_eDP:
		if (desc->bus_format == 0)
			HDF_LOGW("Specify missing bus_format\n");
		if (desc->bpc != 6 && desc->bpc != 8)
			HDF_LOGW("Expected bpc in {6,8} but got: %u\n", desc->bpc);
		break;
	case DRM_MODE_CONNECTOR_DSI:
		if (desc->bpc != 6 && desc->bpc != 8)
			HDF_LOGW("Expected bpc in {6,8} but got: %u\n", desc->bpc);
		break;
	case DRM_MODE_CONNECTOR_DPI:
		bus_flags = DRM_BUS_FLAG_DE_LOW |
			    DRM_BUS_FLAG_DE_HIGH |
			    DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE |
			    DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE |
			    DRM_BUS_FLAG_DATA_MSB_TO_LSB |
			    DRM_BUS_FLAG_DATA_LSB_TO_MSB |
			    DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE |
			    DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE;
		if (desc->bus_flags & ~bus_flags)
			HDF_LOGW("Unexpected bus_flags(%d)\n", desc->bus_flags & ~bus_flags);
		if (!(desc->bus_flags & bus_flags))
			HDF_LOGW("Specify missing bus_flags\n");
		if (desc->bus_format == 0)
			HDF_LOGW("Specify missing bus_format\n");
		if (desc->bpc != 6 && desc->bpc != 8)
			HDF_LOGW("Expected bpc in {6,8} but got: %u\n", desc->bpc);
		break;
	default:
		HDF_LOGW("Specify a valid connector_type: %d\n", desc->connector_type);
		connector_type = DRM_MODE_CONNECTOR_DPI;
		break;
	}

    HDF_LOGI("%s success", __func__);
    return HDF_SUCCESS;
FAIL:
    return HDF_FAILURE;
}

static bool of_child_node_is_present(const struct device_node *node,
				     const char *name)
{
	struct device_node *child;

	child = of_get_child_by_name(node, name);
	of_node_put(child);

	return !!child;
}

static int panel_simple_of_get_desc_data(struct device *dev,
					 struct panel_desc *desc)
{
	struct device_node *np = dev->of_node;
	u32 bus_flags;
	const void *data;
	int len;
	int err;

	if (of_child_node_is_present(np, "display-timings")) {
		struct drm_display_mode *mode;

        mode = (struct drm_display_mode *)OsalMemCalloc(sizeof(*mode));
		if (!mode)
			return -ENOMEM;

		err = of_get_drm_display_mode(np, mode, &bus_flags,
					     OF_USE_NATIVE_MODE);
		if (!err) {
			desc->modes = mode;
			desc->num_modes = 1;
			desc->bus_flags = bus_flags;
		}
	} else if (of_child_node_is_present(np, "panel-timing")) {
		struct display_timing *timing;
		struct videomode vm;

        timing = (struct display_timing *)OsalMemCalloc(sizeof(*timing));
		if (!timing)
			return -ENOMEM;

		if (!of_get_display_timing(np, "panel-timing", timing)) {
			desc->timings = timing;
			desc->num_timings = 1;

			bus_flags = 0;
			vm.flags = timing->flags;
			drm_bus_flags_from_videomode(&vm, &bus_flags);
			desc->bus_flags = bus_flags;
		}
	}

	if (desc->num_modes || desc->num_timings) {
		of_property_read_u32(np, "bpc", &desc->bpc);
		of_property_read_u32(np, "bus-format", &desc->bus_format);
		of_property_read_u32(np, "width-mm", &desc->size.width);
		of_property_read_u32(np, "height-mm", &desc->size.height);
	}

	of_property_read_u32(np, "prepare-delay-ms", &desc->delay.prepare);
	of_property_read_u32(np, "enable-delay-ms", &desc->delay.enable);
	of_property_read_u32(np, "disable-delay-ms", &desc->delay.disable);
	of_property_read_u32(np, "unprepare-delay-ms", &desc->delay.unprepare);
	of_property_read_u32(np, "reset-delay-ms", &desc->delay.reset);
	of_property_read_u32(np, "init-delay-ms", &desc->delay.init);

	data = of_get_property(np, "panel-init-sequence", &len);
	if (data) {
        desc->init_seq = (struct panel_cmd_seq *)OsalMemCalloc(sizeof(*desc->init_seq));
		if (!desc->init_seq)
			return -ENOMEM;

		err = panel_simple_parse_cmd_seq(dev, data, len,
						 desc->init_seq);
		if (err) {
			HDF_LOGE("failed to parse init sequence\n");
			return err;
		}
	}

	data = of_get_property(np, "panel-exit-sequence", &len);
	if (data) {
        desc->exit_seq = (struct panel_cmd_seq *)OsalMemCalloc(sizeof(*desc->exit_seq));
		if (!desc->exit_seq)
			return -ENOMEM;

		err = panel_simple_parse_cmd_seq(dev, data, len,
						 desc->exit_seq);
		if (err) {
			HDF_LOGE("failed to parse exit sequence\n");
			return err;
		}
	}

	return 0;
}

#define BLK_PWM_INDEX             2
#define PWM_MAX_PERIOD            40000
/* backlight setting */
#define MIN_LEVEL                 0
#define MAX_LEVEL                 255
#define DEFAULT_LEVEL             127

static struct PanelInfo g_panelInfo = {
    .width = 720,          /* width */
    .height = 1280,          /* height */
    .hbp = 40,             /* horizontal back porch */
    .hfp = 40,         /* horizontal front porch */
    .hsw = 10,              /* horizontal sync width */
    .vbp = 15,              /* vertical back porch */
    .vfp = 10,              /* vertical front porch */
    .vsw = 36,               /* vertical sync width */
    .clockFreq = 75000000,  /* clock */
    .pWidth = 68,           /* physical width */
    .pHeight = 121,         /* physical height */
    .connectorType = DRM_MODE_CONNECTOR_DPI,   /* DRM_MODE_CONNECTOR_DPI=17 */
    .blk = { BLK_PWM, MIN_LEVEL, MAX_LEVEL, DEFAULT_LEVEL },
};

static void PanelDataInit(struct panel_simple *panel, struct HdfDeviceObject *object)
{
	struct PanelData *panel_data = &panel->panel_data;
	panel_data->object = object;
    panel_data->init = PanelInit;
    panel_data->on = PanelOn;
    panel_data->off = PanelOff;
    panel_data->prepare = PanelPrepare;
    panel_data->unprepare = PanelUnprepare;
	panel_data->info = &g_panelInfo;
	panel_data->priv = panel;
}

static int32_t PanelEntryInit(struct HdfDeviceObject *object)
{
	struct device_node *panelNode = NULL;
    struct platform_device *pdev = NULL;
	struct panel_simple *simplePanel = NULL;
	struct panel_desc *desc = NULL;
    int err;
	bool hasPanel = false;

	HDF_LOGI("PanelEntryInit");

	while((panelNode = of_find_compatible_node(panelNode, NULL, "simple-panel")) != NULL){
		hasPanel = true;

		pdev = of_find_device_by_node(panelNode);
		if (pdev == NULL) {
			HDF_LOGE("%s of_find_device_by_node fail", __func__);
			goto FAIL;
		}

		desc = (struct panel_desc *)OsalMemCalloc(sizeof(*desc));
		if (desc == NULL) {
			HDF_LOGE("%s panel_desc malloc fail", __func__);
			goto FAIL;
		}

		err = panel_simple_of_get_desc_data(&pdev->dev, desc);
		if (err) {
			HDF_LOGE("%s failed to get desc data: %d\n", __func__, err);
			goto FAIL;
		}

		simplePanel = (struct panel_simple *)OsalMemCalloc(sizeof(struct panel_simple));
		if (simplePanel == NULL) {
			HDF_LOGE("%s simplePanel malloc fail", __func__);
			goto FAIL;
		}
		simplePanel->desc = desc;
		simplePanel->panel.dev = &pdev->dev;

		err = panel_simple_probe(&pdev->dev, simplePanel);
		if (err) {
			HDF_LOGE("%s failed to panel_simple_probe: %d\n", __func__, err);
			goto FAIL;
		}

		PanelDataInit(simplePanel, object);

		if (RegisterPanel(&simplePanel->panel_data) != HDF_SUCCESS) {
			HDF_LOGE("RegisterPanel fail");
			goto FAIL;
		}
		
		of_node_put(panelNode);
	}

    if (!hasPanel) {
        HDF_LOGE("%s panel simple not found!!!", __func__);
        goto FAIL;
    }
    
    HDF_LOGI("%s success", __func__);
    return HDF_SUCCESS;
FAIL:
	OsalMemFree(desc);
	OsalMemFree(simplePanel);
    of_node_put(panelNode);
    return HDF_FAILURE;
}

struct HdfDriverEntry g_commonPanelSimpleDevEntry = {
    .moduleVersion = 1,
    .moduleName = "PANEL_SIMPLE_COMMON",
    .Init = PanelEntryInit,
};

HDF_INIT(g_commonPanelSimpleDevEntry);

2.3.2 在DRM显示框架中注册上一步获取到的Panel对象

添加如下两个文件：
hdf_drm_panel_simple.h

/*
 * Copyright (c) 2020-2021 Huawei Device Co., Ltd.
 *
 * HDF is dual licensed: you can use it either under the terms of
 * the GPL, or the BSD license, at your option.
 * See the LICENSE file in the root of this repository for complete details.
 */

#ifndef HDF_DRM_PANEL_SIMPLE_H
#define HDF_DRM_PANEL_SIMPLE_H
#include <linux/of_platform.h>
#include <linux/platform_device.h>

#include <video/display_timing.h>
#include <video/mipi_display.h>
#include <video/of_display_timing.h>
#include <video/videomode.h>

#include <drm/drm_crtc.h>
#include <drm/drm_device.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_panel.h>
#include <drm/drm_dsc.h>

#include "hdf_disp.h"
#include "hdf_bl.h"

struct panel_cmd_header {
	u8 data_type;
	u8 delay;
	u8 payload_length;
} __packed;

struct panel_cmd_desc {
	struct panel_cmd_header header;
	u8 *payload;
};

struct panel_cmd_seq {
	struct panel_cmd_desc *cmds;
	unsigned int cmd_cnt;
};

/**
 * @modes: Pointer to array of fixed modes appropriate for this panel.  If
 *         only one mode then this can just be the address of this the mode.
 *         NOTE: cannot be used with "timings" and also if this is specified
 *         then you cannot override the mode in the device tree.
 * @num_modes: Number of elements in modes array.
 * @timings: Pointer to array of display timings.  NOTE: cannot be used with
 *           "modes" and also these will be used to validate a device tree
 *           override if one is present.
 * @num_timings: Number of elements in timings array.
 * @bpc: Bits per color.
 * @size: Structure containing the physical size of this panel.
 * @delay: Structure containing various delay values for this panel.
 * @bus_format: See MEDIA_BUS_FMT_... defines.
 * @bus_flags: See DRM_BUS_FLAG_... defines.
 */
struct panel_desc {
	const struct drm_display_mode *modes;
	unsigned int num_modes;
	const struct display_timing *timings;
	unsigned int num_timings;

	unsigned int bpc;

	/**
	 * @width: width (in millimeters) of the panel's active display area
	 * @height: height (in millimeters) of the panel's active display area
	 */
	struct {
		unsigned int width;
		unsigned int height;
	} size;

	/**
	 * @prepare: the time (in milliseconds) that it takes for the panel to
	 *           become ready and start receiving video data
	 * @hpd_absent_delay: Add this to the prepare delay if we know Hot
	 *                    Plug Detect isn't used.
	 * @enable: the time (in milliseconds) that it takes for the panel to
	 *          display the first valid frame after starting to receive
	 *          video data
	 * @disable: the time (in milliseconds) that it takes for the panel to
	 *           turn the display off (no content is visible)
	 * @unprepare: the time (in milliseconds) that it takes for the panel
	 *             to power itself down completely
	 * @reset: the time (in milliseconds) that it takes for the panel
	 *         to reset itself completely
	 * @init: the time (in milliseconds) that it takes for the panel to
	 *	  send init command sequence after reset deassert
	 */
	struct {
		unsigned int prepare;
		unsigned int hpd_absent_delay;
		unsigned int enable;
		unsigned int disable;
		unsigned int unprepare;
		unsigned int reset;
		unsigned int init;
	} delay;

	u32 bus_format;
	u32 bus_flags;
	int connector_type;

	struct panel_cmd_seq *init_seq;
	struct panel_cmd_seq *exit_seq;
};

struct panel_simple {
	struct drm_panel panel;
	struct mipi_dsi_device *dsi;

    bool prepared;
	bool enabled;
	bool power_invert;
	bool no_hpd;

    const struct panel_desc *desc;

    struct regulator *supply;

    struct gpio_desc *enable_gpio;
    struct gpio_desc *reset_gpio;
    struct gpio_desc *hpd_gpio;

    struct drm_display_mode override_mode;

	enum drm_panel_orientation orientation;

	struct PanelData panel_data;
	uint32_t index;
	struct DispManager *manager;
};

#endif /* HDF_DRM_PANEL_SIMPLE_H */

hdf_drm_panel_simple.c

/*
 *
 * HDF is dual licensed: you can use it either under the terms of
 * the GPL, or the BSD license, at your option.
 * See the LICENSE file in the root of this repository for complete details.
 */

#include "hdf_drm_panel_simple.h"
#include <drm/drm_device.h>
#include <drm/drm_atomic_helper.h>
#include <linux/backlight.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/regulator/consumer.h>
#include <video/mipi_display.h>
#include <video/of_display_timing.h>
#include <video/videomode.h>
#include <uapi/drm/drm_mode.h>
#include "osal_mem.h"
#include "osal.h"

static inline struct panel_simple *to_panel_simple(const struct drm_panel *panel)
{
    return container_of(panel, struct panel_simple, panel);
}

static int HdfDrmPanelSimpleUnprepare(struct drm_panel *panel)
{
    struct panel_simple *simpePanel = to_panel_simple(panel);
    struct PanelData *panelData;
    struct DispManager *manager = GetDispManager();

    HDF_LOGD("HdfDrmPanelSimpleUnprepare");
    if (simpePanel->index >= PANEL_MAX) {
        HDF_LOGE("panel num out of PANEL_MAX");
        return HDF_FAILURE;
    }
    OsalMutexLock(&manager->dispMutex);
    panelData = manager->panelManager->panel[simpePanel->index];
    panelData->unprepare(panelData);
    OsalMutexUnlock(&manager->dispMutex);
    return HDF_SUCCESS;
}

static int HdfDrmPanelSimplePrepare(struct drm_panel *panel)
{
    struct panel_simple *simpePanel = to_panel_simple(panel);
    struct PanelData *panelData;
    struct DispManager *manager = GetDispManager();

    HDF_LOGD("HdfDrmPanelSimplePrepare");
    if (simpePanel->index >= PANEL_MAX) {
        HDF_LOGE("panel num out of PANEL_MAX");
        return HDF_FAILURE;
    }
    OsalMutexLock(&manager->dispMutex);
    panelData = manager->panelManager->panel[simpePanel->index];
    panelData->prepare(panelData);
    OsalMutexUnlock(&manager->dispMutex);
    return HDF_SUCCESS;
}

static int HdfDrmPanelSimpleDisable(struct drm_panel *panel)
{
    struct panel_simple *simpePanel = to_panel_simple(panel);
    struct PanelData *panelData;
    struct DispManager *manager = GetDispManager();

    HDF_LOGD("HdfDrmPanelSimpleDisable");
    if (simpePanel->index >= PANEL_MAX) {
        HDF_LOGE("panel num out of PANEL_MAX");
        return HDF_FAILURE;
    }
    OsalMutexLock(&manager->dispMutex);
    panelData = manager->panelManager->panel[simpePanel->index];
    panelData->off(panelData);
    OsalMutexUnlock(&manager->dispMutex);
    return HDF_SUCCESS;
}

static int HdfDrmPanelSimpleEnable(struct drm_panel *panel)
{
    struct panel_simple *simpePanel = to_panel_simple(panel);
    struct PanelData *panelData;
    struct DispManager *manager = GetDispManager();
    
    HDF_LOGD("HdfDrmPanelSimpleEnable");
    if (simpePanel->index >= PANEL_MAX) {
        HDF_LOGE("panel num out of PANEL_MAX");
        return HDF_FAILURE;
    }
    panelData = manager->panelManager->panel[simpePanel->index];
    OsalMutexLock(&manager->dispMutex);
    panelData->on(panelData);
    OsalMutexUnlock(&manager->dispMutex);
    return HDF_SUCCESS;
}

#define MIN_LEVEL                 0
#define MAX_LEVEL                 255
#define DEFAULT_LEVEL             100

static int32_t SetPanelInfo(struct panel_simple *simplePanel, struct drm_display_mode *mode)
{
    HDF_LOGI("SetPanelInfo enter");

    struct PanelData *panel = &simplePanel->panel_data;

    panel->info->clockFreq = mode->clock * 1000;
    panel->info->width = mode->hdisplay;
    panel->info->height = mode->vdisplay;
    panel->info->hbp = mode->htotal - mode->hsync_end;
    panel->info->hfp = mode->hsync_start - mode->hdisplay;
    panel->info->hsw = mode->hsync_end - mode->hsync_start;
    panel->info->vbp = mode->vtotal - mode->vsync_end;
    panel->info->vfp = mode->vsync_start - mode->vdisplay;
    panel->info->vsw = mode->vsync_end - mode->vsync_start;
    // panel->info->intfType = LCD_24BIT;
    // panel->info->intfSync = 0;
    // panel->info->frameRate = 0;
    panel->info->blk.type = BLK_PWM;
    panel->info->blk.minLevel = MIN_LEVEL;
    panel->info->blk.maxLevel = MAX_LEVEL;
    panel->info->blk.defLevel = DEFAULT_LEVEL;
    return HDF_SUCCESS;
}

static unsigned int panel_simple_get_timings_modes(struct panel_simple *panel,
						   struct drm_connector *connector)
{
	struct drm_display_mode *mode;
	unsigned int i, num = 0;

	for (i = 0; i < panel->desc->num_timings; i++) {
		const struct display_timing *dt = &panel->desc->timings[i];
		struct videomode vm;

		videomode_from_timing(dt, &vm);
		mode = drm_mode_create(connector->dev);
		if (!mode) {
			HDF_LOGE("failed to add mode %ux%u\n", 
                dt->hactive.typ, dt->vactive.typ);
			continue;
		}

		drm_display_mode_from_videomode(&vm, mode);

		mode->type |= DRM_MODE_TYPE_DRIVER;

		if (panel->desc->num_timings == 1)
			mode->type |= DRM_MODE_TYPE_PREFERRED;

		drm_mode_probed_add(connector, mode);
		num++;

        HDF_LOGI("panel_simple_get_timings_modes SetPanelInfo:%d", i);
        SetPanelInfo(panel, mode);
	}

	return num;
}

static unsigned int panel_simple_get_display_modes(struct panel_simple *panel,
						   struct drm_connector *connector)
{
	struct drm_display_mode *mode;
	unsigned int i, num = 0;

    HDF_LOGI("panel_simple_get_display_modes enter");

	for (i = 0; i < panel->desc->num_modes; i++) {
		const struct drm_display_mode *m = &panel->desc->modes[i];

		mode = drm_mode_duplicate(connector->dev, m);
		if (!mode) {
			HDF_LOGE("failed to add mode %ux%u@%u\n",
				m->hdisplay, m->vdisplay,
				drm_mode_vrefresh(m));
			continue;
		}

		mode->type |= DRM_MODE_TYPE_DRIVER;

		if (panel->desc->num_modes == 1)
			mode->type |= DRM_MODE_TYPE_PREFERRED;

		drm_mode_set_name(mode);

		drm_mode_probed_add(connector, mode);
		num++;

        HDF_LOGI("panel_simple_get_display_modes SetPanelInfo:%d num:%d", i, num);
        SetPanelInfo(panel, mode);
	}

	return num;
}

static int panel_simple_get_non_edid_modes(struct panel_simple *panel,
					   struct drm_connector *connector)
{
	struct drm_display_mode *mode;
	bool has_override = panel->override_mode.type;
	unsigned int num = 0;

	if (!panel->desc)
		return 0;

	if (has_override) {
		mode = drm_mode_duplicate(connector->dev,
					  &panel->override_mode);
		if (mode) {
			drm_mode_probed_add(connector, mode);
			num = 1;

            HDF_LOGI("panel_simple_get_non_edid_modes SetPanelInfo");
            SetPanelInfo(panel, mode);
		} else {
			HDF_LOGE("failed to add override mode\n");
		}
	}

	/* Only add timings if override was not there or failed to validate */
	if (num == 0 && panel->desc->num_timings)
		num = panel_simple_get_timings_modes(panel, connector);

	/*
	 * Only add fixed modes if timings/override added no mode.
	 *
	 * We should only ever have either the display timings specified
	 * or a fixed mode. Anything else is rather bogus.
	 */
	WARN_ON(panel->desc->num_timings && panel->desc->num_modes);
	if (num == 0)
		num = panel_simple_get_display_modes(panel, connector);

	if (panel->desc->bpc)
		connector->display_info.bpc = panel->desc->bpc;
	if (panel->desc->size.width)
		connector->display_info.width_mm = panel->desc->size.width;
	if (panel->desc->size.height)
		connector->display_info.height_mm = panel->desc->size.height;
	if (panel->desc->bus_format)
		drm_display_info_set_bus_formats(&connector->display_info,
						 &panel->desc->bus_format, 1);
	if (panel->desc->bus_flags)
		connector->display_info.bus_flags = panel->desc->bus_flags;

	return num;
}

static int HdfDrmPanelSimpleGetModes(struct drm_panel *panel, struct drm_connector *connector)
{
    struct panel_simple *p = to_panel_simple(panel);
    int num = 0;
    
    HDF_LOGI("HdfDrmPanelSimpleGetModes");

    if (panel == NULL) {
        HDF_LOGE("panel is NULL");
        return 0;
    }
    if (connector == NULL) {
        HDF_LOGE("connector is NULL");
        return 0;
    }

    // /* probe EDID if a DDC bus is available */
	// if (p->ddc) {
	// 	struct edid *edid = drm_get_edid(connector, p->ddc);

	// 	drm_connector_update_edid_property(connector, edid);
	// 	if (edid) {
	// 		num += drm_add_edid_modes(connector, edid);
	// 		kfree(edid);
	// 	}
	// }

	/* add hard-coded panel modes */
	num += panel_simple_get_non_edid_modes(p, connector);

	// /* set up connector's "panel orientation" property */
	// drm_connector_set_panel_orientation(connector, p->orientation);

	return num;
}

static int HdfDrmPanelSimpleGetTimings(struct drm_panel *panel,
				    unsigned int num_timings,
				    struct display_timing *timings)
{
    struct panel_simple *p = to_panel_simple(panel);
	unsigned int i;

	if (p->desc->num_timings < num_timings)
		num_timings = p->desc->num_timings;

	if (timings)
		for (i = 0; i < num_timings; i++)
			timings[i] = p->desc->timings[i];

	return p->desc->num_timings;
}

static struct drm_panel_funcs g_hdfDrmPanelFuncs = {
    .disable = HdfDrmPanelSimpleDisable,
    .unprepare = HdfDrmPanelSimpleUnprepare,
    .prepare = HdfDrmPanelSimplePrepare,
    .enable = HdfDrmPanelSimpleEnable,
    .get_modes = HdfDrmPanelSimpleGetModes,
    .get_timings = HdfDrmPanelSimpleGetTimings,
};

static ssize_t SuspendStore(struct device *dev,
    struct device_attribute *attr, const char *buf, size_t count)
{
    int32_t ret;
    struct panel_simple *simpePanel = dev_get_drvdata(dev);

    ret = HdfDrmPanelSimpleDisable(&simpePanel->panel);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s HdfDrmPanelSimpleDisable fail", __func__);
        return count;
    }
    ret = HdfDrmPanelSimpleUnprepare(&simpePanel->panel);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s HdfDrmPanelSimpleUnprepare fail", __func__);
        return count;
    }
    return count;
}
static DEVICE_ATTR(suspend, S_IWUSR, NULL, SuspendStore);

static ssize_t ResumeStore(struct device *dev,
    struct device_attribute *attr, const char *buf, size_t count)
{
    int32_t ret;
    struct panel_simple *simpePanel = dev_get_drvdata(dev);

    ret = HdfDrmPanelSimplePrepare(&simpePanel->panel);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s HdfDrmPanelSimplePrepare fail", __func__);
        return count;
    }
    ret = HdfDrmPanelSimpleEnable(&simpePanel->panel);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s HdfDrmPanelSimpleEnable fail", __func__);
        return count;
    }
    return count;
}
static DEVICE_ATTR(resume, S_IWUSR, NULL, ResumeStore);

static ssize_t BacklightStore(struct device *dev,
    struct device_attribute *attr, const char *buf, size_t count)
{
    int32_t ret;
    unsigned long level;
    struct PanelData *panelData = NULL;
    struct panel_simple *simpePanel = dev_get_drvdata(dev);
    struct DispManager *manager = GetDispManager();

    ret = kstrtoul(buf, 0, &level);
    if (ret != 0) {
        return ret;
    }
    HDF_LOGI("%s enter", __func__);
    OsalMutexLock(&manager->dispMutex);
    panelData = manager->panelManager->panel[simpePanel->index];
    OsalMutexUnlock(&manager->dispMutex);
    ret = UpdateBrightness(panelData->blDev, level);
    if (ret != HDF_SUCCESS) {
        HDF_LOGE("%s UpdateBrightness fail", __func__);
    }

    return count;
}
static DEVICE_ATTR(backlight, S_IWUSR, NULL, BacklightStore);

#define ATTR_NUM  3
static struct device_attribute *g_panelAttrs[] = {
    &dev_attr_suspend,
    &dev_attr_resume,
    &dev_attr_backlight,
    NULL,
};

static int32_t HdfDrmPanelSimpleEntryInit(struct HdfDeviceObject *object)
{
    (void)object;
    uint32_t ret;
    uint32_t i;
    uint32_t j;
    uint32_t panelNum;
    struct panel_simple *simplePanel = NULL;
    struct DispManager *manager = NULL;
    struct drm_panel *panel = NULL;
    struct device *dev = NULL;

    manager = GetDispManager();
    if (manager == NULL) {
        HDF_LOGE("%s manager is null", __func__);
        return HDF_FAILURE;
    }
    panelNum = manager->panelManager->panelNum;
    for (i = 0; i < panelNum; i++) {
        simplePanel = (struct panel_simple *)manager->panelManager->panel[i]->priv;
        simplePanel->index = i;
        panel = &simplePanel->panel;
        dev = panel->dev;

        drm_panel_init(panel, dev, &g_hdfDrmPanelFuncs, simplePanel->desc->connector_type);

        ret = drm_panel_of_backlight(panel);
        if (ret){
            HDF_LOGE("%s drm_panel_of_backlight failed %d", __func__, ret);
            drm_panel_remove(panel);
            return ret;
        }

        drm_panel_add(panel);

        dev_set_drvdata(dev, simplePanel);

        for (j = 0; j < ATTR_NUM; j++) {
            if (device_create_file(dev, g_panelAttrs[j]) != 0) {
                HDF_LOGE("%s line = %d device_create_file fail", __func__, __LINE__);
            }
        }

        HDF_LOGI("%s panel[%d] registered success", __func__, i);
    }
    HDF_LOGI("%s success", __func__);
    return HDF_SUCCESS;
}

struct HdfDriverEntry g_hdfDrmPanelSimpleEntry = {
    .moduleVersion = 1,
    .moduleName = "HDF_DRM_PANEL_SIMPLE",
    .Init = HdfDrmPanelSimpleEntryInit,
};

HDF_INIT(g_hdfDrmPanelSimpleEntry);

2.3.3 修改panel驱动的编译配置文件

前两步添加的文件需要加到编译配置文件里面才可以进行编译，如下：
Makefile

在这里插入图片描述

2.3.4 修改device_info驱动配置文件

device_info驱动配置文件原来加载的是MIPI屏幕驱动，这里我们改成加载我们编写的LVDS屏幕驱动，如下：
device_info.hcs
在这里插入图片描述

3. 编译运行

3.1 编译我们修改过的源码

./build.sh --product-name ok3568 --target-cpu arm64

在这里插入图片描述

3.2 烧录镜像文件并运行查看效果

在这里插入图片描述
在这里插入图片描述

4. 可能遇到的问题

4.1 pwm背光调节没有反应

原因： RK3568背光功能默认使用原生pwm驱动，并且pwm路径已经写死了，如下：
在这里插入图片描述
解决办法： 找到设备树里面lvds屏幕所使用的 “pwm-backlight” 节点，修改节点名字为backlight，如下
在这里插入图片描述
或者修改drm_connector.cpp文件中的背光调节功能的文件路径。

5. 参考

标准系统方案之瑞芯微RK3568移植案例

本文来自互联网用户投稿，该文观点仅代表作者本人，不代表本站立场。本站仅提供信息存储空间服务，不拥有所有权，不承担相关法律责任。如若转载，请注明出处：http://www.coloradmin.cn/o/1385932.html

如若内容造成侵权/违法违规/事实不符，请联系多彩编程网进行投诉反馈，一经查实，立即删除！

相关文章

文章解读与仿真程序复现思路——电网技术EI\CSCD\北大核心《考虑风电出力不确定性的电网无功-电压控制鲁棒分区方法》

文章解读与仿真程序复现思路——电网技术EI\CSCD\北大核心《考虑风电出力不确定性的电网无功-电压控制鲁棒分区方法》

本专栏栏目提供文章与程序复现思路&#xff0c;具体已有的论文与论文源程序可翻阅本博主免费的专栏栏目《论文与完整程序》 这个标题涉及到考虑风电出力不确定性的电网无功-电压控制鲁棒分区方法。让我们逐步解读这个标题的主要关键词和概念&#xff1a; 考虑风电出力不确定性…
阅读更多...
Ubuntu server搭建dhcp服务器

Ubuntu server搭建dhcp服务器

安装 直接使用一下命令进行安装 apt-get install isc-dhcp-server 以下就是安装好的图片 然后进入dhcp目录 cd /etc/dhcp 进入后用ls查看当前目录存在哪些文件 使用如下进入dhcp.conf vim dhcpd.conf 红&#xff1a;设置ip域和子网掩码 绿&#xff1a;设置ip池范围 黄…
阅读更多...
Linux下的HTTP代理服务器Squid的配置和使用

Linux下的HTTP代理服务器Squid的配置和使用

Squid是一个流行的Linux下的HTTP代理服务器软件。通过Squid&#xff0c;你可以在Linux服务器上设置一个代理服务器&#xff0c;以便为客户端提供安全的网络连接和数据传输。以下是Squid的配置和使用指南。 1. 安装Squid 首先&#xff0c;你需要确保你的Linux系统上已经安装了…
阅读更多...
机器学习算法 - 马尔可夫链

机器学习算法 - 马尔可夫链

马尔可夫链&#xff08;Markov Chain&#xff09;可以说是机器学习和人工智能的基石&#xff0c;在强化学习、自然语言处理、金融领域、天气预测、语音识别方面都有着极其广泛的应用 > The future is independent of the past given the present 未来独立于过去&#xff…
阅读更多...
arcgis javascript api4.x加载天地图wgs84（wkid：4326）坐标系

arcgis javascript api4.x加载天地图wgs84（wkid：4326）坐标系

需求&#xff1a; 使用arcgis javascript api4.x以basetilelayer方式加载天地图wgs84&#xff08;wkid&#xff1a;4326&#xff09;坐标系 效果&#xff1a; 代码&#xff1a; 提示&#xff1a;&#xff08;下述三个文件放同一个文件夹下&#xff09; 4326.js define([ex…
阅读更多...
五、mysql8忘记root用户密码怎么办？怎么修改用户密码？

五、mysql8忘记root用户密码怎么办？怎么修改用户密码？

目录 1、忘记密码怎么修改密码 1&#xff09;、首先停止mysql的服务 2&#xff09;、新建一个文本文件&#xff0c;文本文件中就写一条修改密码的语句 3&#xff09;、使用管理员权限运行cmd命令行&#xff0c;运行以下命令&#xff1a; 4&#xff09;、然后按CTRLC结束上…
阅读更多...
Jetbrains ai assistant激活后仍无法使用，怎么回事？

Jetbrains ai assistant激活后仍无法使用，怎么回事？

用正式的ai assistant激活码激活后仍然无法使用 首先获取了ai assistant激活码&#xff0c;激活后如下 地址&#xff1a;https://web.52shizhan.cn 上图是已经激活成功了&#xff0c;但是在右侧这里打开ai assistant不可用 点击开始使用ai assistant 出错 以上是用了ai as…
阅读更多...
ssm基于web的学生考勤管理系统论文

ssm基于web的学生考勤管理系统论文

基于Web的学生考勤管理系统的设计与实现 摘 要 当下&#xff0c;正处于信息化的时代&#xff0c;许多行业顺应时代的变化&#xff0c;结合使用计算机技术向数字化、信息化建设迈进。以前学校对于学生考勤信息的管理和控制&#xff0c;采用人工登记的方式保存相关数据&#xff…
阅读更多...
[Kubernetes]10. k8s部署Goweb+mysql项目实战演练

[Kubernetes]10. k8s部署Goweb+mysql项目实战演练

一.安装docker构建镜像 如果要本地构建镜像的话,对应节点还需要安装docker,安装教程见:[Docker]一.Docker 简介与安装 linux环境,centos8下 docker及docker compose安装教程 k8s部署Goweb+mysql项目有两种方法:第一种是传统部署方法,第二种是通过ConfigMap实现应用配置分离部署…
阅读更多...
数据库第一次作业

数据库第一次作业

1.创建一个英雄表 create table t_hero ( id int primary key auto_increment, name varchar(10) unique not null, gender char(5) check (gender in (男,女)), grade char(5) default 5星, groups char(5) check (groups in (毁灭,巡猎,智识,存护,…
阅读更多...
4.2V锂电线性1.2A充电芯片WT4056

4.2V锂电线性1.2A充电芯片WT4056

4.2V锂电线性1.2A充电芯片WT4056 WT4056是一款专为单节锂离子电池设计的恒流/恒压线性充电器。其简洁的外部电路设计使其非常适用于便携设备的供电&#xff0c;同时兼容USB电源和适配器电源。该充电器内部采用了防倒充电路&#xff0c;无需额外添加外部隔离二极管。通过热反馈…
阅读更多...
Zabbix监控(1)

Zabbix监控(1)

目录 一.什么是zabbix Zabbix 组件&#xff1a; 主动模式&#xff1a; 被动模式&#xff1a; Zabbix 工作原理&#xff1a; zabbix 监控原理&#xff1a; 二.Zabbix 6.0 部署 先安装nginx&#xff0c;php&#xff08;yum源安装&#xff09;&#xff1a; 安装nginx&…
阅读更多...
用bat脚本执行py文件以及批量执行py文件（全网超详细）

用bat脚本执行py文件以及批量执行py文件（全网超详细）

1.前言 对于python代码&#xff0c;每次执行一个文件就要运行一个命令&#xff0c;太过麻烦 在Windows电脑上&#xff0c;想一次性执行多个python文件的代码&#xff0c;就需要用到bat脚本 2.python代码 先写几个python代码的文件 如下图 3.py文件为中文&#xff0c;用bat执…
阅读更多...
Javaweb之SpringBootWeb案例的详细解析

Javaweb之SpringBootWeb案例的详细解析

SpringBootWeb案例 前面我们已经讲解了Web前端开发的基础知识&#xff0c;也讲解了Web后端开发的基础(HTTP协议、请求响应)&#xff0c;并且也讲解了数据库MySQL&#xff0c;以及通过Mybatis框架如何来完成数据库的基本操作。 那接下来&#xff0c;我们就通过一个案例&#xf…
阅读更多...
MATLAB实验Simulink的应用

MATLAB实验Simulink的应用

本文MATLAB源码&#xff0c;下载后直接打开运行即可[点击跳转下载]-附实验报告https://download.csdn.net/download/Coin_Collecter/88740734 一、实验目的 1.熟悉Simulink操作环境。 2.掌握建立系统仿真模型以及系统仿真分析的方法。 二、实验内容 1.利用Simulink仿真下列曲…
阅读更多...
【数据结构】哈希表详解，举例说明 java中的 HashMap

【数据结构】哈希表详解，举例说明 java中的 HashMap

一、哈希表&#xff08;Hash Table&#xff09;简介&#xff1a; 哈希表是一种数据结构&#xff0c;用于实现字典或映射等抽象数据类型。它通过把关键字映射到表中的一个位置来实现快速的数据检索。哈希表的基本思想是利用哈希函数将关键字映射到数组的索引位置上&#xff0c;…
阅读更多...
centos7 arm服务器编译安装openssl 1.1.1版本

centos7 arm服务器编译安装openssl 1.1.1版本

前言 在centos7中&#xff0c;默认安装的openssl版本是1.0.2&#xff0c;太低了&#xff0c;在python项目开发中&#xff0c;由于需要用到requests包&#xff0c;这时候就会出现如下错误“ImportError: urllib3 v2.0 only supports OpenSSL 1.1.1”&#xff1a; 解决办法就只能…
阅读更多...
10万字200道软件测试经典面试总结（附答案）

10万字200道软件测试经典面试总结（附答案）

&#x1f345; 视频学习&#xff1a;文末有免费的配套视频可观看 &#x1f345; 关注公众号【互联网杂货铺】&#xff0c;回复 1 &#xff0c;获取《110万字200道软件测试经典面试总结&#xff08;附答案&#xff09;》pdf&#xff0c;背题更方便&#xff0c;一文在手&#xff…
阅读更多...
lvgl模拟器

lvgl模拟器

学习目标 能够搭建lvgl模拟器开发环境 学习内容 项目源码准备 http://docs.lvgl.io/latest/en/html/get-started 下载模拟器项目 GitHub - lvgl/lv_port_pc_eclipse: PC simulator project for LVGL embedded GUI Library. Recommended on Linux and Mac. 下载lvgl源码 …
阅读更多...
一键制作底片效果，让视频复古感倍增！

一键制作底片效果，让视频复古感倍增！

你是否厌倦了千篇一律的视频效果&#xff0c;想要尝试一些与众不同的视觉体验&#xff1f;是否想要让你的视频散发出一种复古、怀旧的气息&#xff1f;现在&#xff0c;有了我们的底片效果制作工具&#xff0c;这些愿望全部实现 首先第一步&#xff0c;我们要进入视频剪辑高手…
阅读更多...
推荐文章
最新文章

Copyright @ 2022~2023