Pytroch_Sequential使用、损失函数、反向传播和优化器
文章目录
- nn.Sequential
- 搭建小实战
- 损失函数与反向传播
- 优化器
nn.Sequential
nn.Sequential是一个有序的容器，用于搭建神经网络的模块被按照被传入构造器的顺序添加到nn.Sequential()容器中。
import torch.nn as nn
from collections import OrderedDict
# Using Sequential to create a small model. When `model` is run,
# input will first be passed to `Conv2d(1,20,5)`. The output of
# `Conv2d(1,20,5)` will be used as the input to the first
# `ReLU`; the output of the first `ReLU` will become the input
# for `Conv2d(20,64,5)`. Finally, the output of
# `Conv2d(20,64,5)` will be used as input to the second `ReLU`
model = nn.Sequential(
nn.Conv2d(1,20,5),
nn.ReLU(),
nn.Conv2d(20,64,5),
nn.ReLU()
)
# Using Sequential with OrderedDict. This is functionally the
# same as the above code
model = nn.Sequential(OrderedDict([
('conv1', nn.Conv2d(1,20,5)),
('relu1', nn.ReLU()),
('conv2', nn.Conv2d(20,64,5)),
('relu2', nn.ReLU())
]))
print(model)
Sequential(
(conv1): Conv2d(1, 20, kernel_size=(5, 5), stride=(1, 1))
(relu1): ReLU()
(conv2): Conv2d(20, 64, kernel_size=(5, 5), stride=(1, 1))
(relu2): ReLU()
)
搭建小实战
还是以 C I F A R − 10 m o d e l CIFAR-10 model CIFAR−10model为例
- 输入图像是3通道的32×32的
- 先后经过卷积层(5×5的卷积核)
- 最大池化层(2×2的池化核)
- 卷积层(5×5的卷积核)
- 最大池化层(2×2的池化核)
- 卷积层(5×5的卷积核)
- 最大池化层(2×2的池化核)
- 拉直(flatten)
- 全连接层的处理，
- 最后输出的大小为10
基于以上的介绍，后续将利用Pytorch构建模型，实现 C I F A R − 10 m o d e l s t r u c t u r e CIFAR-10 \quad model \quad structure CIFAR−10modelstructure
参数说明：in_channels: int、out_channels: int,kernel_size: Union由input、特征图以及卷积核即可看出，而stride、padding需要通过公式计算得到。
特得到的具体的特征图尺寸的计算公式如下:
inputs : 3@32x32，3通道32x32的图片,5*5的kernel --> 特征图(Feature maps) : 32@32x32
即经过32个3@5x5的卷积层，输出尺寸没有变化（有x个卷积核即由x个卷积核，卷积核的通道数与输入的通道数相等）
由上述的计算公式来计算出 s t r i d e stride stride和 p a d d i n g padding padding
卷积层中的stride默认为1
池化层中的stride默认为kernel_size的大小
import torch
import torch.nn as nn
import torchvision
from torch.utils.data import DataLoader
from torch.utils.tensorboard import SummaryWriter
class BS(nn.Module):
def __init__(self):
super().__init__()
self.conv1 = nn.Conv2d(in_channels=3,
out_channels=32,
kernel_size=5,
stride=1,
padding=2) #stride和padding计算得到
self.maxpool1 = nn.MaxPool2d(kernel_size=2)
self.conv2 = nn.Conv2d(in_channels=32,
out_channels=32,
kernel_size=5,
stride=1,
padding=2)
self.maxpool2 = nn.MaxPool2d(kernel_size=2)
self.conv3 = nn.Conv2d(in_channels=32,
out_channels=64,
kernel_size=5,
padding=2)
self.maxpool3 = nn.MaxPool2d(kernel_size=2)
self.flatten = nn.Flatten() #变为63*4*4=1024
self.linear1 = nn.Linear(in_features=1024, out_features=64)
self.linear2 = nn.Linear(in_features=64, out_features=10)
def forward(self,x):
x = self.conv1(x)
x = self.maxpool1(x)
x = self.conv2(x)
x = self.maxpool2(x)
x = self.conv3(x)
x = self.maxpool3(x)
x = self.flatten(x)
x = self.linear1(x)
x = self.linear2(x)
return x
bs = BS()
bs
BS(
(conv1): Conv2d(3, 32, kernel_size=(5, 5), stride=(1, 1), padding=(2, 2))
(maxpool1): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
(conv2): Conv2d(32, 32, kernel_size=(5, 5), stride=(1, 1), padding=(2, 2))
(maxpool2): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
(conv3): Conv2d(32, 64, kernel_size=(5, 5), stride=(1, 1), padding=(2, 2))
(maxpool3): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
(flatten): Flatten(start_dim=1, end_dim=-1)
(linear1): Linear(in_features=1024, out_features=64, bias=True)
(linear2): Linear(in_features=64, out_features=10, bias=True)
)
利用Sequential优化代码，并在tensorboard显示
.add_graph函数用于将PyTorch模型图添加到TensorBoard中。通过这个函数，您可以以可视化的方式展示模型的计算图，使其他人更容易理解您的模型结构和工作流程。
add_graph(model, input_to_model, strip_default_attributes=True)
- model：要添加的PyTorch模型。
- input_to_model：用于生成模型图的输入数据。
- strip_default_attributes：是否删除模型中的默认属性，默认为True。
class BS(nn.Module):
def __init__(self):
super().__init__()
self.model = nn.Sequential(
nn.Conv2d(in_channels=3,
out_channels=32,
kernel_size=5,
stride=1,
padding=2), #stride和padding计算得到
nn.MaxPool2d(kernel_size=2),
nn.Conv2d(in_channels=32,
out_channels=32,
kernel_size=5,
stride=1,
padding=2),
nn.MaxPool2d(kernel_size=2),
nn.Conv2d(in_channels=32,
out_channels=64,
kernel_size=5,
padding=2),
nn.MaxPool2d(kernel_size=2),
nn.Flatten(), #变为64*4*4=1024
nn.Linear(in_features=1024, out_features=64),
nn.Linear(in_features=64, out_features=10),
)
def forward(self,x):
x = self.model(x)
return x
bs = BS()
print(bs)
BS(
(model): Sequential(
(0): Conv2d(3, 32, kernel_size=(5, 5), stride=(1, 1), padding=(2, 2))
(1): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
(2): Conv2d(32, 32, kernel_size=(5, 5), stride=(1, 1), padding=(2, 2))
(3): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
(4): Conv2d(32, 64, kernel_size=(5, 5), stride=(1, 1), padding=(2, 2))
(5): MaxPool2d(kernel_size=2, stride=2, padding=0, dilation=1, ceil_mode=False)
(6): Flatten(start_dim=1, end_dim=-1)
(7): Linear(in_features=1024, out_features=64, bias=True)
(8): Linear(in_features=64, out_features=10, bias=True)
)
)
# 在tensorboard中显示
input_ = torch.ones((64,3,32,32))
writer = SummaryWriter(".logs")
writer.add_graph(bs, input_) # 定义的模型，数据
writer.close()
利用tensorboard可视化网络结构graph如下
损失函数与反向传播
计算模型目标输出和实际输出之间的误差。并通过反向传播算法更新模型的权重和参数，以减小预测输出和实际输出之间的误差。
- 计算实际输出和目标输出之间的差距
- 为更新输出提供一定依据(反向传播)
不同的模型用的损失函数一般也不一样。
平均绝对误差MAE Mean Absolute Error
torch.nn.L1Loss(size_average=None, reduce=None, reduction=‘mean’)
import torch
import torch.nn as nn
# 实例化
criterion1 = nn.L1Loss(reduction='mean')#mean
criterion2 = nn.L1Loss(reduction="sum")#sum
output = torch.tensor([1.0, 2.0, 3.0])#或dtype=torch.float32
target = torch.tensor([2.0, 2.0, 2.0])#或dtype=torch.float32
# 平均值损失值
loss = criterion1(output, target)
print(loss) # 输出：tensor(0.6667)
# 误差和
loss1 = criterion2(output,target)
print(loss1) # tensor(2.)
tensor(0.6667)
tensor(2.)
loss = nn.L1Loss()
input = torch.randn(3, 5, requires_grad=True)
target = torch.randn(3, 5)
output = loss(input, target)
output.backward()
output
tensor(1.0721, grad_fn=<MeanBackward0>)
均方误差MSE Mean-Square Error
torch.nn.MSELoss(size_average=None, reduce=None, reduction=‘mean’)
import torch.nn as nn
# 实例化
criterion1 = nn.MSELoss(reduction='mean')
criterion2 = nn.MSELoss(reduction="sum")
output = torch.tensor([1, 2, 3],dtype=torch.float32)
target = torch.tensor([1, 2, 5],dtype=torch.float32)
# 平均值损失值
loss = criterion1(output, target)
print(loss) # 输出：tensor(1.3333)
# 误差和
loss1 = criterion2(output,target)
print(loss1) # tensor(4.)
tensor(1.3333)
tensor(4.)
交叉熵损失 CrossEntropyLoss
torch.nn.CrossEntropyLoss(weight=None,size_average=None,ignore_index=-100,reduce=None,reduction='mean',label_smoothing=0.0)
当你有一个不平衡的训练集时，这是特别有用的
import torch
import torch.nn as nn
# 设置三分类问题，假设是人的概率是0.1，狗的概率是0.2，猫的概率是0.3
x = torch.tensor([0.1, 0.2, 0.3])
print(x)
y = torch.tensor([1]) # 设目标标签为1，即0.2狗对应的标签,目标标签张量y
x = torch.reshape(x, (1, 3)) # tensor([[0.1000, 0.2000, 0.3000]]),批次大小为1，分类数3，即为3分类
print(x)
print(y)
# 实例化对象
loss_cross = nn.CrossEntropyLoss()
# 计算结果
result_cross = loss_cross(x, y)
print(result_cross)
tensor([0.1000, 0.2000, 0.3000])
tensor([[0.1000, 0.2000, 0.3000]])
tensor([1])
tensor(1.1019)
import torch
import torchvision
from torch.utils.data import DataLoader
# 准备数据集
dataset = torchvision.datasets.CIFAR10(root="dataset",train=False,transform=torchvision.transforms.ToTensor(),download=True)
# 数据集加载器
dataloader = DataLoader(dataset, batch_size=1)
"""
输入图像是3通道的32×32的，
先后经过卷积层(5×5的卷积核)、
最大池化层(2×2的池化核)、
卷积层(5×5的卷积核)、
最大池化层(2×2的池化核)、
卷积层(5×5的卷积核)、
最大池化层(2×2的池化核)、
拉直、
全连接层的处理，
最后输出的大小为10
"""
# 搭建神经网络
class BS(nn.Module):
def __init__(self):
super().__init__()
self.model = nn.Sequential(
nn.Conv2d(in_channels=3,
out_channels=32,
kernel_size=5,
stride=1,
padding=2), #stride和padding计算得到
nn.MaxPool2d(kernel_size=2),
nn.Conv2d(in_channels=32,
out_channels=32,
kernel_size=5,
stride=1,
padding=2),
nn.MaxPool2d(kernel_size=2),
nn.Conv2d(in_channels=32,
out_channels=64,
kernel_size=5,
padding=2),
nn.MaxPool2d(kernel_size=2),
nn.Flatten(), #变为64*4*4=1024
nn.Linear(in_features=1024, out_features=64),
nn.Linear(in_features=64, out_features=10),
)
def forward(self, x):
x = self.model(x)
return x
# 实例化
bs = BS()
loss = torch.nn.CrossEntropyLoss()
# 对每一张图片进行CrossEntropyLoss损失函数计算
# 使用损失函数loss计算预测结果和目标标签之间的交叉熵损失
for inputs,labels in dataloader:
outputs = bs(inputs)
result = loss(outputs,labels)
print(result)
tensor(2.3497, grad_fn=<NllLossBackward0>)
tensor(2.2470, grad_fn=<NllLossBackward0>)
tensor(2.2408, grad_fn=<NllLossBackward0>)
tensor(2.2437, grad_fn=<NllLossBackward0>)
tensor(2.3121, grad_fn=<NllLossBackward0>)
........
优化器
优化器(Optimizer)是用于更新神经网络参数的工具
它根据计算得到的损失函数的梯度来调整模型的参数，以最小化损失函数并改善模型的性能
常见的优化器包括:SGD、Adam
optimizer = torch.optim.SGD(model.parameters(), lr=learning_rate)
optimizer = torch.optim.Adam(model.parameters(), lr=learning_rate)
model.parameters()用于获取模型的可学习参数
learning rate,lr表示学习率，即每次参数更新的步长
在每个训练批次中，需要执行以下操作:
-
输入训练数据到模型中，进行前向传播
-
根据损失函数计算损失
-
调用优化器的zero_grad()方法清零之前的梯度
-
调用backward()方法进行反向传播，计算梯度
-
调用优化器的step()方法更新模型参数
伪代码如下(运行不了的)
import torch
import torch.optim as optim
# Step 1: 定义模型
model = ...
# Step 2: 定义优化器
optimizer = optim.SGD(model.parameters(), lr=0.01)
# Step 3: 定义损失函数
criterion = ...
# Step 4: 训练循环
for inputs, labels in dataloader:
# 前向传播
outputs = model(inputs)
# 计算损失
loss = criterion(outputs, labels)
# 清零梯度
optimizer.zero_grad()
# 反向传播,得到梯度
loss.backward()
# 更新参数，根据梯度就行优化
optimizer.step()
在上述模型代码中，SGD作为优化器，lr为0.01。同时根据具体任务选择适合的损失函数，例如torch.nn.CrossEntropyLoss、torch.nn.MSELoss等，以CIFRA10为例
import torch
import torch.optim as optim
import torchvision
from torch.utils.data import DataLoader
dataset = torchvision.datasets.CIFAR10(root="dataset", train=False, transform=torchvision.transforms.ToTensor(),download=True)
dataloader = DataLoader(dataset,batch_size=1)
class BS(nn.Module):
def __init__(self):
super().__init__()
self.model = nn.Sequential(
nn.Conv2d(in_channels=3,
out_channels=32,
kernel_size=5,
stride=1,
padding=2), #stride和padding计算得到
nn.MaxPool2d(kernel_size=2),
nn.Conv2d(in_channels=32,
out_channels=32,
kernel_size=5,
stride=1,
padding=2),
nn.MaxPool2d(kernel_size=2),
nn.Conv2d(in_channels=32,
out_channels=64,
kernel_size=5,
padding=2),
nn.MaxPool2d(kernel_size=2),
nn.Flatten(), #变为64*4*4=1024
nn.Linear(in_features=1024, out_features=64),
nn.Linear(in_features=64, out_features=10),
)
def forward(self, x):
x = self.model(x)
return x
model = BS() #定义model
optimizer = optim.SGD(model.parameters(), lr=0.01) #定义优化器SGD
criterion = nn.CrossEntropyLoss() #定义损失函数，交叉熵损失函数
'''循环一次，只对数据就行了一轮的学习'''
for inputs, labels in dataloader:
# 前向传播
outputs = model(inputs)
# 计算损失
loss = criterion(outputs, labels)
# 清零梯度
optimizer.zero_grad()
# 反向传播
loss.backward()
# 更新参数
optimizer.step()
# 打印经过优化器后的结果
print(loss)
"""训练循环20次"""
# for epoch in range(20):
# running_loss = 0.0
# for inputs, labels in dataloader:
# # 前向传播
# outputs = model(inputs)
# # 计算损失
# loss = criterion(outputs,labels)
# # 清零梯度
# optimizer.zero_grad()
# # 反向传播
# loss.backward()
# # 更新参数
# optimizer.step()
# # 打印经过优化器后的结果
# running_loss = running_loss + loss
# print(running_loss)
Files already downloaded and verified
tensor(2.3942, grad_fn=<NllLossBackward0>)
tensor(2.2891, grad_fn=<NllLossBackward0>)
tensor(2.2345, grad_fn=<NllLossBackward0>)
tensor(2.2888, grad_fn=<NllLossBackward0>)
tensor(2.2786, grad_fn=<NllLossBackward0>)
........
![[云原生案例2.4 ] Kubernetes的部署安装 【通过Kubeadm部署Kubernetes高可用集群】](https://img-blog.csdnimg.cn/c908fa84bd364dc6a178e534533c8c9b.png)
![[html] 动态炫彩渐变背景](https://img-blog.csdnimg.cn/b4f4c7a437cd45c7af5a85db30f4d8d7.png)
![[量化投资-学习笔记012]Python+TDengine从零开始搭建量化分析平台-策略回测](https://img-blog.csdnimg.cn/8dd2acabe5064d6a9cd1309e16a05697.png#pic_center)
