Keeplived官网：https://www.keepalived.org/download.html
一 单机安装配置:
1.上传keepalived安装包并且安装
[root@master1 local]# tar -zxvf keepalived-2.2.8.tar.gz
[root@master1 local]# mv keepalived-2.2.8 keepalived
[root@master1 local]# chown root:root -R keepalived
[root@master1 local]# cd keepalived
[root@master1 keepalived]# ./configure --prefix=/usr/local/keepalived
[root@master1 keepalived]# make && make install
[root@master1 keepalived]# ls
aclocal.m4 autogen.sh bin_install build_setup config.log configure CONTRIBUTORS doc Dockerfile.in INSTALL keepalived.spec lib Makefile Makefile.in README.md share TODO
AUTHOR bin build-aux ChangeLog config.status configure.ac COPYING Dockerfile etc keepalived keepalived.spec.in m4 Makefile.am README sbin snap tools2.修改配置
[root@master1 keepalived]# cd etc/keepalived/
[root@master1 keepalived]# ls
keepalived.conf.sample samples
[root@master1 keepalived]# cp keepalived.conf.sample keepalived.conf
[root@master1 keepalived]# ls
keepalived.conf keepalived.conf.sample samples3.添加系统启动项
vim /lib/systemd/system/keepalived.service[Unit]
Description=LVS and VRRP High Availability Monitor
After=network-online.target syslog.target
Wants=network-online.target
Documentation=man:keepalived(8)
Documentation=man:keepalived.conf(5)
Documentation=man:genhash(1)
Documentation=https://keepalived.org
[Service]
Type=forking
PIDFile=/run/keepalived.pid
KillMode=process
EnvironmentFile=-/usr/local/keepalived/etc/sysconfig/keepalived
ExecStart=/usr/local/keepalived/sbin/keepalived $KEEPALIVED_OPTIONS
ExecReload=/bin/kill -HUP $MAINPID
[Install]
WantedBy=multi-user.target重新加载配置：
systemctl daemon-reload
设置开机启动：
cp /usr/local/keepalived/sbin/keepalived /etc/init.d/keepalived
systemctl enable keepalived
启动命令：
systemctl start keepalived
systemctl status keepalived
systemctl restart keepalived启动和相关报错：
[root@master1 etc]# systemctl start keepalived
[root@master1 keepalived]# systemctl status keepalived
● keepalived.service - LVS and VRRP High Availability Monitor
Loaded: loaded (/usr/lib/systemd/system/keepalived.service; enabled; vendor preset: disabled)
Active: failed (Result: exit-code) since 四 2023-10-19 18:05:36 CST; 3s ago
Docs: man:keepalived(8)
man:keepalived.conf(5)
man:genhash(1)
https://keepalived.org
Process: 110509 ExecStart=/usr/local/keepalived/sbin/keepalived $KEEPALIVED_OPTIONS (code=exited, status=0/SUCCESS)
Main PID: 110510 (code=exited, status=2)
Tasks: 0
Memory: 0B
CGroup: /system.slice/keepalived.service
10月 19 18:05:36 master1 Keepalived[110510]: NOTICE: setting config option max_auto_priority should result in better keepalived performance
10月 19 18:05:36 master1 Keepalived[110510]: Starting Healthcheck child process, pid=110511
10月 19 18:05:36 master1 Keepalived[110510]: Starting VRRP child process, pid=110512
10月 19 18:05:36 master1 Keepalived_healthcheckers[110511]: Initializing ipvs
10月 19 18:05:36 master1 systemd[1]: keepalived.service: main process exited, code=exited, status=2/INVALIDARGUMENT
10月 19 18:05:36 master1 systemd[1]: Unit keepalived.service entered failed state.
10月 19 18:05:36 master1 systemd[1]: keepalived.service failed.
10月 19 18:05:36 master1 Keepalived_healthcheckers[110511]: Gained quorum 1+0=1 <= 1 for VS [192.168.200.100]:tcp:443
10月 19 18:05:36 master1 Keepalived_healthcheckers[110511]: Gained quorum 1+0=1 <= 2 for VS [10.10.10.2]:tcp:1358
10月 19 18:05:36 master1 Keepalived_healthcheckers[110511]: Gained quorum 1+0=1 <= 2 for VS [10.10.10.3]:tcp:1358需要修改虚拟ip等配置：
[root@master1 keepalived]# tail -f /var/log/messages
Oct 19 18:07:04 master1 grafana: logger=plugins.update.checker t=2023-10-19T18:07:04.752278809+08:00 level=info msg="Update check succeeded" duration=6.432745249s
Oct 19 18:07:06 master1 systemd: Starting LVS and VRRP High Availability Monitor...
Oct 19 18:07:06 master1 Keepalived[110735]: Starting Keepalived v2.2.8 (04/04,2023), git commit v2.2.7-154-g292b299e+
Oct 19 18:07:06 master1 Keepalived[110735]: Running on Linux 3.10.0-1160.76.1.el7.x86_64 #1 SMP Wed Aug 10 16:21:17 UTC 2022 (built for Linux 3.10.0)
Oct 19 18:07:06 master1 Keepalived[110735]: Command line: '/usr/local/keepalived/sbin/keepalived' '-D'
Oct 19 18:07:06 master1 Keepalived[110735]: Opening file '/usr/local/keepalived/etc/keepalived/keepalived.conf'.
Oct 19 18:07:06 master1 Keepalived[110735]: Configuration file /usr/local/keepalived/etc/keepalived/keepalived.conf
Oct 19 18:07:06 master1 systemd: Started LVS and VRRP High Availability Monitor.
Oct 19 18:07:06 master1 Keepalived[110735]: (Line 15) WARNING - number '0' outside range [0.000001, 4294.967295]
Oct 19 18:07:06 master1 Keepalived[110735]: (Line 15) vrrp_garp_interval '0' is invalid
Oct 19 18:07:06 master1 Keepalived[110735]: (Line 16) WARNING - number '0' outside range [0.000001, 4294.967295]
Oct 19 18:07:06 master1 Keepalived[110735]: (Line 16) vrrp_gna_interval '0' is invalid
Oct 19 18:07:06 master1 Keepalived[110736]: NOTICE: setting config option max_auto_priority should result in better keepalived performance
Oct 19 18:07:06 master1 Keepalived[110736]: Starting Healthcheck child process, pid=110737
Oct 19 18:07:06 master1 Keepalived[110736]: Starting VRRP child process, pid=110738
Oct 19 18:07:06 master1 Keepalived_vrrp[110738]: Registering Kernel netlink reflector
Oct 19 18:07:06 master1 systemd: keepalived.service: main process exited, code=exited, status=2/INVALIDARGUMENT
Oct 19 18:07:06 master1 Keepalived_vrrp[110738]: Registering Kernel netlink command channel
Oct 19 18:07:06 master1 systemd: Unit keepalived.service entered failed state.
Oct 19 18:07:06 master1 Keepalived_vrrp[110738]: (/usr/local/keepalived/etc/keepalived/keepalived.conf: Line 21) WARNING - interface eth0 for vrrp_instance VI_1 doesn't exist
Oct 19 18:07:06 master1 systemd: keepalived.service failed.
Oct 19 18:07:06 master1 Keepalived_vrrp[110738]: Non-existent interface specified in configuration
Oct 19 18:07:06 master1 Keepalived_vrrp[110738]: Stopped - used 0.000000 user time, 0.001848 system time
Oct 19 18:07:06 master1 Keepalived[110736]: pid 110738 exited with permanent error CONFIG. Terminating
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Gained quorum 1+0=1 <= 1 for VS [192.168.200.100]:tcp:443
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Gained quorum 1+0=1 <= 2 for VS [10.10.10.2]:tcp:1358
Oct 19 18:07:06 master1 Keepalived[110736]: CPU usage (self/children) user: 0.000000/0.000000 system: 0.001606/0.002565
Oct 19 18:07:06 master1 Keepalived[110736]: Stopped Keepalived v2.2.8 (04/04,2023), git commit v2.2.7-154-g292b299e+
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Gained quorum 1+0=1 <= 2 for VS [10.10.10.3]:tcp:1358
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Activating healthchecker for service [192.168.201.100]:tcp:443 for VS [192.168.200.100]:tcp:443
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Activating healthchecker for service [192.168.200.2]:tcp:1358 for VS [10.10.10.2]:tcp:1358
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Activating healthchecker for service [192.168.200.3]:tcp:1358 for VS [10.10.10.2]:tcp:1358
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Activating healthchecker for service [192.168.200.4]:tcp:1358 for VS [10.10.10.3]:tcp:1358
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Activating healthchecker for service [192.168.200.5]:tcp:1358 for VS [10.10.10.3]:tcp:1358
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Shutting down service [192.168.201.100]:tcp:443 from VS [192.168.200.100]:tcp:443
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Shutting down service [192.168.200.2]:tcp:1358 from VS [10.10.10.2]:tcp:1358
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Shutting down service [192.168.200.3]:tcp:1358 from VS [10.10.10.2]:tcp:1358
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Shutting down service [192.168.200.4]:tcp:1358 from VS [10.10.10.3]:tcp:1358
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Shutting down service [192.168.200.5]:tcp:1358 from VS [10.10.10.3]:tcp:1358
Oct 19 18:07:06 master1 Keepalived_healthcheckers[110737]: Stopped - used 0.001620 user time, 0.001620 system time[root@master1 keepalived]# vim keepalived.conf! Configuration File for keepalived
global_defs {
notification_email {
acassen@firewall.loc
failover@firewall.loc
sysadmin@firewall.loc
}
notification_email_from Alexandre.Cassen@firewall.loc
smtp_server 192.168.200.1
smtp_connect_timeout 30
router_id LVS_DEVEL
vrrp_skip_check_adv_addr
vrrp_strict
vrrp_garp_interval 0
vrrp_gna_interval 0
}
vrrp_instance VI_1 {
state MASTER
interface ens32 #这个是根据ip address来的，就是本机的网卡名称
virtual_router_id 51
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
10.10.10.33 #这个地址是根据原来机器的ip来的，比如原ip：10.10.10.10，虚拟ip写成10.10.10.33或其他的
}
} 
测试：
1.需要安装nginx并且配置(nginx自己安装)
[root@master1 conf]# cd /usr/local/nginx/html
[root@master1 html]# vim test.html
this is a test url!
vim nginx.conf
测试结果：
二 双机安装配置:
待续...
